Table of Contents
Advertisement
Clock and Calendar
The system clock information will automatically be sent to the portable station. However, you can also
program clock and calendar yourself as follows.
1. When the portable station is idle, press [Menu] [5] [1].
2. Press [Menu].
3. Enter the current time.
à
Enter Month
Date
Use [*
] to move the cursor to the left, and [#
right.
Hours are denoted in military time (24-hour cycle).
4. Press [Menu].
When the programming is complete, you will hear two
quick beeps. The portable station goes back to the idle
state.
NOTES:
•
When you turn the power off and back on again in the service area, or when you walk into the service
area from outside, the manual setting will be replaced by the system clock information.
•
When the battery is replaced or too drained, the portable station will lose the manual setting.
à
à
Year
Time.
MENU:51
TIME
MENU TO PROG
01/01/2000
12:00
MENU TO PROG
01/01/2000
15:30
] to the
MENU TO PROG
TIME
COMPLETED
10
Advertisement
Table of Contents
