Using The Camera With The Swk360 App - Silvercrest SWK 360 A1 Operating Instructions And Safety Instructions

♦ Select the entry SWK360_xxxxxx (xxxxxx = serial number) from the list of discovered
devices on your smartphone again.
♦ If the password query does not appear automatically, the Wi-Fi entry must first be removed and
then reselected.
♦ Enter the new Wi-Fi password from the camera display
♦ Restart the app. Now you can use the full functionality of the app.
♦ To terminate the Wi-Fi connection and deactivate the Wi-Fi, press the
camera. Alternatively, you can disconnect the Wi-Fi in the app in the "Settings" menu under
"Wi-Fi".
NOTE
► The camera needs to be reconnected to your smartphone every time the Wi-Fi connection is
terminated. It may be necessary to close and reopen the app with a new Wi-Fi connection.
► If it is necessary to switch your smartphone to airplane mode, you will also need to make
sure that the Wi-Fi on the camera is deactivated.
► If you reset the camera to its factory defaults, the password will be reset. You will be required
to enter a new password.

Using the camera with the SWK360 app

To use the camera with the SWK360 app, open the app on your smartphone. After the startup
screen appears, the app connects to the camera.
The app has three menus: "Video/photo", "Media Gallery" and "Settings".
NOTE
► If there is no Wi-Fi connection between the camera and your smartphone, you can only
access files that have already been downloaded in the app via the "Media Gallery" menu.
► The functions shown here are from the Android version of the app. There may be slight
differences with iOS devices.
► Slight deviations in the displays are also possible.
■ 30 GB│IE│NI
│
to connect the two devices.
button on the
SWK 360 A1