Advertisement
Advertisement
Table of Contents
Related Manuals for Rowenta NEO 566270
Summary of Contents for Rowenta NEO 566270
- Page 1 instructions for use instructions for use english english ref. 566270...
- Page 2 Foam filter Antibacteria micro-active filter Filter cartridge HEPA FILTER SYSTEM ZR 482 Your vacuum cleaner is equipped either with a foam filter and a micro-active filter(a+b), either with a HEPA filter (c) Dustbag compartment opening Dustbag compartment lid Dustbag compartment...
- Page 3 Never unplug the appliance by pulling on the cord. Only use original Rowenta accessories, dustbags and filters. Check that the all the filters are properly in place. Never turn the appliance on without a dustbag and filters.
- Page 4 IV • VACUUMING Turn on your vaccuum cleaner. Adjust the suction power. With the electronic power control (according to model*) : Max : floors Min : furniture, Turn off your appliance. V • STORING Caution ! Never turn the appliance on without a dustbag and filters.
- Page 5 VI • MAINTENANCE AND CLEANING IMPORTANT ! Always turn off and unplug your appliance before maintenance or cleaning Change the dustbag. The dustbag full indicator (according to model*) informs you that the bag is full or blocked with dust particles. If the indicator is orange replace the bag or empty the textile filter (with the nozzle lifted off the ground and the power set at its max level).
- Page 6 Clean the air-outlet foam filter (according to model*). Replace the micro-active filter (ref. Kit ZR 480) (according to model*). Replace the HEPA filter (according to model*). IMPORTANT ! When using the HEPA FILTER SYSTEM, do not forget to remove the air outlet foam filter and the micro-active filter.
- Page 7 • Always keep nozzles and tube ends well away from eyes and ears. • Make sure that the operating voltage of your vacuum cleaner is the same as your supply voltage - 230-240v. • Unplug the appliance by removing the plug from the power outlet:...
- Page 8 VIII • WHAT TO DO IF … IMPORTANT! As soon as your vacuum cleaner starts to malfunction, and before performing any checks: • Stop the appliance by pressing the Start/Stop switch. • Unplug the appliance. Your vacuum cleaner will not start.
Need help?
Do you have a question about the NEO 566270 and is the answer not in the manual?
Questions and answers