Rowenta Ultra Professional Ultra Professional Steam Iron Instructions For Use Manual

Rowenta Ultra Professional Ultra Professional Steam Iron Instructions For Use Manual

Rowenta ultra professional steam iron instructions

Advertisement

Ultra Professional
Instructions for Use

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ultra Professional Ultra Professional Steam Iron and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rowenta Ultra Professional Ultra Professional Steam Iron

  • Page 1 Ultra Professional Instructions for Use...
  • Page 2: Important Safety Instructions

    Use caution when you turn a steam iron upside down there may be hot water in the reservoir. 9. The use of accessory attachments is not recommended by Rowenta Appliance Company and may result in fire, electric shock or personal injury.
  • Page 3: Special Instructions

    12-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. 3. Your Rowenta appliance is intended for household use only. SAVE THESE INSTRUCTIONS...
  • Page 4: Product View And Parts

    Description: A Spray nozzle B Covered water filling inlet K Temperature light C Variable steam control L Long-Life System D Self clean system M Precision Stainless Steel E Spray button F Burst of steam button G Auto-off indicator light N Transparent water tank O Water level indicator H Temperature control dial Swiveling cord protector...
  • Page 5: Before Use

    It is normal for a small amount of smoke to be produced the first time the iron is used. This will quickly disappear. 3-WAY AUTO-OFF If the iron is not moved while it is plugged in, an internal safety switch will turn it off. 30 sec.
  • Page 6: Selecting The Temperature

    Check the fabric's label for appropriate setting. Laundry label To avoid an automatic switch off while the iron is heating up, always keep the iron on its heel. Start at low temperature high temperature . For delicate fabrics we recommend carrying out a test on an unobstrusive part of the garment (inner seam).
  • Page 7: Spray Setting

    POINTS TO NOTE If the iron has not been used for a long time (e.g. several weeks) the steam channels should be cleaned and any deposits removed from the iron. To do this, hold the iron horizontally before you start to use it and allow it to produce steam for about 1 minute.
  • Page 8: After Ironing

    WATER TO USE IN ROWENTA IRONS Tap water Rowenta irons are designed to be used with REGULAR TAP WATER (up to 12 grains of hardness). If your water is harder than this, Rowen- ta recommends mixing half tap water with half distilled water which reduces the hardness;...
  • Page 9: Long-Life System

    Steam Chamber Cleaning Function This function allows loose mineral deposits and other impurities that build up inside the iron to be flushed out. This type of self cleaning only needs to be carried out occasionally and never more than once a month.
  • Page 10: Cleaning And Maintenance

    In normal use a draggy coating may build up on the soleplate (starch, detergent buildup, burnt synthetic fibers). This can be easily removed by using the Rowenta Soleplate Cleaning Kit or a quality hot iron soleplate cleaner available at most stores.
  • Page 11: Iron Troubleshooting

    For more information refer to the full use instructions. If after using the trouble shooting guide you are still experiencing problems, do not return the iron to the store, but contact Rowenta Consumer Service who will be pleased to assist you.

This manual is also suitable for:

Ultra professional ultra profe

Table of Contents