Table of Contents
Advertisement
CREATING PRESETS
Creating an A/V Preset consists simply of storing a complete set of the
parameters set forth in "DSP Options" and "Tone Controls" accessible via the
"Main Menu" together with "Listening Mode Setup", "Speaker Setup" and
"Display Setup" configurable through "Setup Menu".
Scroll to "A/V Presets" using the [D/F] keys to save a collection of said
parameter settings to a Preset. Select a Preset number and by pressing the
[D/F] keys, you can selectively include in the particular A/V Preset any of
the above-mentioned parameter settings by choosing "Yes". If you decide
not to include in the particular A/V Preset a certain parameter setting,
select "No".
Save Current Setup to Preset
Preset configurations and settings are saved to the current Preset number.
Load Defaults to Preset
Default Preset configurations and settings are saved to the current Preset
number.
Load Preset
Effect or load Preset settings configured for the particular Preset number.
This is similar to directly recalling the Preset settings for Preset 3 by pressing
HTRM 2 button combinations AMP+AV PSET+3.
IMPORTANT
If "Load Preset" is selected after "Load Defaults to Preset" is selected, the
default settings are loaded.
SAMPLE PROCEDURE FOR SETTING UP A/V PRESETS
1 Setup first your preferred settings for the following options (access
them through their respective menu page).
Listening Mode Setup: Listening Modes/Dolby Digital/Stereo/Dolby
Surround
DSP Options: Dirac Live: Off
USING THE M17 – SETUP MENU
Tone Controls: Tone Defeat/Off
Speaker Setup: from the Speaker Setup menu, go to "Speaker
Configuration" sub-menu and change "Height 1" and "Height 2" from
"Off" to "On".
Front Panel Display Setup: Brightness level to "3"
OPERATION
23
Advertisement
Table of Contents
