SAFETY INSTRUCTIONS • A mower user must be in good physical condition and mental health and not under the influence of any drug or alcohol which might impair vision, co-ordination or judgement. • Do not use a mower when tired or fatigued. Lack of alertness may cause serious injury.
Congratulations on your purchase of a quality Australian made and owned ROVER product. WARNING To maintain maximum efficiency and to avoid loss of mower warranty, use and fit only genuine ROVER spare parts. GRASS CATCHER ASSEMBLY Ensure that all BARBS in the TOP are located in SLOTS provided in the BOTTOM.
Page 4
REAR CATCHER MOWER SET-UP GRASS CATCHER (Fig. 2) To Fit: Raise FLAP, grasp HANDLE, and position catcher against rear of mower. To Remove: Grasp HANDLE, lift FLAP, remove catcher. WARNING: Stop engine to fit or remove catcher. FOLDING HANDLE (Fig. 3) Your mower handle is held in position with either a LOCKING LEVER (Fig.3) or KNOBS (Fig.
UTILITY MOWER SET-UP BEFORE STARTING PREPARE ENGINE The four stroke engine used on the mower requires separate additions of petrol and oil. CAUTION: Do not mix petrol with oil. PETROL Clean, fresh, unleaded petrol is recommended. Lead free petrol burns cleaner with fewer combustion deposits Use a high quality detergent oil with service classification SE or SF.
MAINTENANCE Perform only that maintenance described in this manual and engine instructions. For other adjustments or repairs contact an Authorised Rover Mower Service Agent. Briggs & Stratton Operating & Maintenance Instructions are known as Engine Instructions here. MAINTAIN ENGINE OIL LEVEL CAUTION: A low oil level may result in engine damage.
MAINTENANCE SNORKEL AIR CLEANER The SNORKEL air cleaner element must be cleaned after each 50 hours of normal mowing. The element must be cleaned more frequently when the mower is used in dusty conditions. 1. Disconnect Air Tube from Cartridge holder. 2.
MAINTENANCE BLADE CHANGE REAR CATCHER MOWER 1. Disconnect spark plug wire 2. Set mower at high cut and fold handle. 3. To access blades lift FLAP and PROP with broom handle or garden stake. (Fig. 10) 4. Remove blade retaining bolt, nut and washer assemblies.
1/8 turn clockwise to obtain a leaner mixture: refer ENGINE INSTRUCTIONS - ADJUSTMENTS 9. Contact ROVER Mower Service Agent 1. Drain fuel and clean tank. Fill tank with clean, fresh fuel: refer BEFORE STARTING 2. Clean or replace fuel tank cap.
Product Model No: ... Product Serial No: ... Date of Purchase: ... Rover Mowers Limited reserves the right to make changes of and add improvements upon its product at any time without notice or obligation. ISO 9001 Lic 10168 The Company also reserves the right to discontinue manufacture of any Standards Australia product at its discretion at any time.
Need help?
Do you have a question about the Domestic Domestic Rotary Mower and is the answer not in the manual?
Questions and answers