NEC SV9100 User Manual page 3

Press ↓ menu key
Press PROG menu key
Press ↓ menu key until FCTN appears
TO PROGRAM ONE TOUCH
Press FCTN button
KEY
Then press button you want to program.
Enter 01 on dial pad (if previously programmed enter 00 then 01)
Then the extension number or for an external call enter 9 + phone no.
Press Hold to save number then Speaker to end.
Press ↓ menu key
Press PROG menu key
Press CFWD menu key
CALL FORWARD ALL Press ALL menu key
Press SET menu key
Enter extension number
Press "Speaker" Again
Press ↓ menu key
Press PROG menu key
Press CFWD menu key
CALL FORWARD ALL CANCEL
Press ALL menu key
Press CANCEL menu key
Press SPEAKER twice.
With Handset call in progress, press Speaker button twice
Handset call is still connected, and incoming voice is broadcast over
GROUP LISTEN
speaker. Press Speaker button then return handset to cradle to
disconnect call.
Lift the handset press ** and extension n umber of ringing phone to
CALL PICKUP
intercept call or *# to intercept any GROUP incoming call
Press ↓ menu key
Press PROG menu key
Press DND menu key
DO NOT DISTURB
Press SET OR CANL follow prompts
OR - If you have a DND button on your phone, you may,
Press DND button + 3 to set, 0 to cancel
U C
SING URSOR
O
N HANDSET CALL CONTROLS INCOMING VOLUME
VOLUME CONTROL S C
PEAKER
W
HILE PHONE IS RINGING CONTROLS INCOMING RING VOLUME
P
HONE AT REST CONTROL DISPLAY CONTRAST
While telephone is idle, Dial *729
TO CHANGE RING VOLUME Use Volume control to adjust volume
Press Speaker key to save and end.
While telephone is idle, Dial *720
Display will show "Set Incoming Ring 1:INT 2:EXT"
Enter choice for internal calls or external call
TO CHANGE RING TONE
Display will ask "Incoming Ring 1-8?"
Press buttons 1-8 on dial pad to sample tones.
P U D C
AD P AND OWN ONTROL
ALL CONTROLS HANDS FREE VOLUME