Download  Print this page

Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual Page 83

Patient monitor..
Hide thumbs

Advertisement

Measurement Settings
Temp, Trect, Tcore, Tskin, Tesoph, Tnaso, Tart, Tven, Tvesic, Ttymp,
Tcereb, Tamb, T1, T2, T3, T4 Settings
Measurement Settings: Main Setup -> Measurements -> <Temp Label>
Factory Defaults
Item Name
High Limit
Low Limit
Alarms
Temp (or other label)) x
Unit
Range
Color
See "Configuring C.O. (Cardiac Output)" on page 65 for Tblood settings. Tinj has no settings. Taway is
sourced from a VueLink or IntelliBridge plug-in module, therefore no settings can be changed.
Temp Configuration Implications
<Temp Label> The On/Off state of the Temp measurement cannot be preconfigured. The Temp
measurement is automatically switched On when a Temp probe is connected to a Temp socket on the
monitor.
Unit Lets you select the temperature unit for the temperature label.
Range This setting defines the measurement range for the temperature label. Available choices are
1...45, 11...45, and 35...43.
The configured Range is used for the horizon screen trend application. When a temperature is viewed as
horizon trend,
• the high end of the Range defines the maximum temperature that can be selected in the related Screen
Trend menu under Set High Horizon,
• the low end of the Range defines the minimum temperature that can be selected in the related Screen
Trend menu under Set Low Horizon.
Oper.
MX800,
Mode
MP5 - MP90 (H10/20/40)
MP2/X2
C M Profile
Profile
Adult
Pedi
x
x 39
x
x 36
x
x On
x not applicable, the Temp On/Off state is not a setting, see "Temp Configuration
Implications" on page 83.
0
x
C
x
35...43
x
Green
4 Configuration Settings Appendix
MX800,
MP5 - MP90 (H30)
Profile
Profile
Profile
Neo
Adult
Pedi
35
Light Green
MP2/X2
Profile
Profile
Neo
Outdoor
36
White
83

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: