Download  Print this page

Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual Page 31

Patient monitor..
Hide thumbs

Advertisement

About Configuration Settings
To keep the tables as readable as possible, the following rules apply:
– If the same default value applies to more than one profile in the same subsection, the table entry will
be extended to cover all profiles that apply, and the value will be listed in the leftmost column only
(see Repetition Time or Mode).
– If the same default value applies to the same profile in different subsections, it is only listed in the
leftmost subsection. For example, the default for Sys. High in Profile Pedi in
MX800, MP5 through MP90 monitors with option H30 (second subsection from the left) is the
same as it is in Profile Pedi in MX800, MP20 through MP90 monitors with options H10/20/
40 (leftmost subsection). It is therefore only listed in the leftmost subsection and the corresponding
table entry in the column Profile Pedi for MX800, MP20 through MP90 monitors with
option H30 is left empty.
not applicable Whenever you see a statement in the settings tables starting with "not applicable" (as in
NBP Time), this can mean two things (the exact reason will always be given in the context):
• the setting appears as a menu item in the related Setup menu, but is actually stored in a different
context. For example, the NBP Time setting appears in the Setup NBP menu. However, it is not
stored as an NBP measurement setting, but as a monitor setting in the User Interface menu.
• the setting appears as a menu item in the related Setup menu, but cannot be stored in the monitor
configuration. For example, the setting C.O. in the Cardiac Output Setup menu (see "C.O.
Configuration Implications" on page 66) defines the On/Off status of the C.O. measurement, i.e.
whether the Cardiac Output measurement is switched On or Off. However, the C.O. measurement (as
most other measurements in the IntelliVue monitor) can only be switched On if a C.O. transducer is
connected to the monitor. Therefore this setting cannot be permanently stored in the monitors
configuration.
Understanding H and M Options
Application Area Options
H10
H20
H30
H40
MP20 Model Options
M20
1
M21
1.MP20 option M21 is available in the US only.
General/Intensive Care
Neonatal
Anesthesia
Cardiac Care
MP20 Junior
MP20L
4 Configuration Settings Appendix
31

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: