Download  Print this page

Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual Page 308

Patient monitor..
Hide thumbs

Advertisement

7 Telemetry Device and CL Pods Use Models
Use Model 2
CL SpO
Pod and/or CL NBP Pod assigned to a TRx4841A/Trx4851A telemetry device.
2
Device
Description
This use model involves assigning a CL SpO
radio connection. The telemetry device is assigned to an IntelliVue Information Center. Patient monitors
are not directly connected to the IntelliVue Information Center.
Results
• Data from the CL Pods is displayed at the Information Center in the same patient sector as the
telemetry device data.
• When assigned, CL Pods communicate their measurement values via short range radio to the telemetry
device which sends the data to the Information Center via the telemetry device radio.
• Telemetry device pairing is still possible with this use model. When the CL Pods are assigned to the
telemetry device, and the telemetry devices are subsequently paired, the data from the CL Pods will
appear in the telemetry device data window along with the ECG data from the telemetry device.
Advantages
• Data from the CL Pods is displayed at the Information Center in the same patient sector as the
telemetry device data.
308
Connection
Device
SRR
SRR
Pod or CL NBP Pod to a telemetry device via a short range
2
Cableless (CL Pod) Measurements Use Models
Connection
IntelliVue
Telemetry
wireless
IntelliVue
Telemetry
wireless
Device

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: