Download  Print this page

Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual Page 301

Patient monitor..
Hide thumbs

Advertisement

Telemetry Device Use Models
Configuration: Use Model 4
Required Configuration on X2, MP5
Set Network setting TAAP to
Assign Equipment label
Required Hardware on X2, MP5
SRR interface or TAAP connector
IntelliVue Instrument telemetry (IIT) interface
Required Configuration at Information Center for X2, MP5
Equipment label requirement
Troubleshooting FAQ for Use Model 4
I am not able to assign a telemetry device to the X2 or MP5, the measurement selection icon never changes when
I press the check button on the telemetry device, what can I do?
• This configuration does not support the assignment of a telemetry device to the X2 or MP5. Your X2 or
MP5 is the telemetry device in this configuration. If you need the X2 or MP5 to allow the connection
of telemetry devices wirelessly, please see the configuration for use model 2, telemetry device paired with
a networked MP2, X2, or MP5 - Direct Connection.
7 Telemetry Device and CL Pods Use Models
Disabled
yes
no
IIT can be used
Telemetry device label - ITS
301

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: