Download  Print this page

Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual Page 295

Patient monitor..
Hide thumbs

Advertisement

Telemetry Device Use Models
Use Model 2
Telemetry device paired with a networked MP2, X2, or MP5. Direct connection.
Device
Description
This use model involves directly connecting a telemetry device to a networked connected MP2, X2, or
MP5 which is LAN connected to an IntelliVue Information Center. The direct connection can be
established either via a TAAP cable to an MP5, or by assigning the telemetry device to the MP2, X2, or
MP5 via a short range radio link.The X2 or MP5 cannot be connected to a host monitor (Companion
Mode).
Results
• If configured, the monitor and the telemetry device are automatically paired at the Information Center
when the direct connection is established.
• Data from the telemetry device is displayed at the Information Center in the same patient sector as the
X2, MP2, or MP5 data.
• Data from the telemetry device is displayed directly on the monitor. The ECG waves and numerics
appear in place of the monitor's own ECG, and SpO
available).
Advantages
• Near real time ECG in room (less than 1 second delay) when connected with cable or short range radio
link.
Connection
Device
TAAP
SRR
7 Telemetry Device and CL Pods Use Models
Connection
wired
or
IntelliVue
802.11
wireless
wired
or
IntelliVue
802.11
wireless
T is displayed as an additional measurement (if
2
Device
295

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: