Download  Print this page

Changing The Size And Position Of Screen Elements; Configuring Smartkeys - Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual

Patient monitor..
Hide thumbs

Advertisement

Changing the Size and Position of Screen Elements

1
Select the numeric you want to substitute.
2
Select Change Numeric.
Select Clock.
3
Be aware of the following restrictions:
• Only one clock can be displayed per Screen
• If limited space is available, the label "Clock" may not be displayed. The minimum information
displayed is the time.
Displaying a ProtocolWatch Status Indicator on the Main Screen
If you want to have a ProtocolWatch status indicator displayed on the Main Screen, you can substitute it
MX800
for a numeric which is not directly associated with a wave or a Screen Trend.
MP5-90
only
To display a ProtocolWatch status indicator on the Main Screen,
1
Select the numeric you want to substitute.
Select Change Numeric.
2
Select PW Status.
3
Only one ProtocolWatch status indicator can be displayed per Screen.
Changing the Size and Position of Screen Elements
You cannot change the size and position of Screen elements. This is a configuration service that is
provided, at a charge, by Philips, for monitors with option C20.

Configuring SmartKeys

There are two ways to configure SmartKeys:
• Configuring a different list of SmartKeys for each Screen (not possible for MP2/X2)
• Configuring a global list of SmartKeys that applies for all Screens
Configuring a Different List of SmartKeys for Each Screen
The selection and order of SmartKeys that are specific to a Screen are stored as part of the Screen, i.e. as a
MX800
Screen setting. This can be configured on the monitor (in configuration mode) or by using the Support
MP5-90
Tool Screen Editor. The following describes how to configure SmartKeys on the monitor. For a detailed
only
description on how to use the Support Tool Screen Editor, see the Support Tool Instructions for Use.
To change the selection of SmartKeys displayed,
Select Main Screen, then select the left double arrow key to scroll back one page of SmartKeys.
1
Select the SmartKey SmartKeys to open a menu that lists all SmartKeys currently configured for
2
that Screen. From the pop-up key line, select Add to open a second menu that contains all available
SmartKeys.
From the second menu, select the desired SmartKey. This adds the new key to the bottom of the list of
3
configured SmartKeys (on the left). The maximum number of SmartKeys per Screen is 30 for the
MX800, MP60/70/80/90, and 24 for the MP40/50, MP20/30, and MP5.
3 Configuring Screens
25

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: