Download  Print this page

Modifying An Existing Screen; Creating New Screens; Configuring Screens On An Xds Remote Display - Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual

Patient monitor..
Hide thumbs

Advertisement

3 Configuring Screens
• special settings that determine the behavior of certain Screen elements, such as Screen trends, realtime
waves, embedded trend windows, or embedded Other Bed Overview windows.

Modifying an Existing Screen

To change an existing Screen:
Load the Screen and make the changes to the Screen.
1
In configuration mode, select Profiles -> Display (or Display 2, or Display 3).
2
In the list of Screens, the modified Screen is shown linked to the original Screen and marked with an
3
asterisk (*). Select the Store pop-up key to overwrite the existing Screen. Changes to the Screen
affect all Profiles in which this Screen is used.
Changes made to a Screen viewed on an XDS Remote Display will be stored on the PC connected to the
N O TE
XDS Remote Display and will not be part of the monitor configuration, see "Configuring Screens on an
XDS Remote Display" on page 22.

Creating New Screens

Load a Screen similar to the one you want to create from the list of Screens available in the monitor.
1
Create a new Screen based on the active Screen:
2
a. In the Profiles menu, select Display (or Display 2, or Display 3).
b. Select the pop-up key New.
c. Use the on-screen keyboard to type a meaningful name for the new Screen. If you do not name the
Screen, the monitor will assign a default name. You can rename it later.
d. Select Enter.
Change the content of the Screen as required.
3
Store the finished Screen:
4
a. In the Profiles menu, select Display (or Display 2, or Display 3).
b. Select the pop-up key Store and then Confirm to apply your changes. There is no undo
function.
Changes made to a Screen viewed on an XDS Remote Display will be stored on the PC connected to the
N O TE
XDS Remote Display and will not be part of the monitor configuration, see "Configuring Screens on an
XDS Remote Display" on page 22.

Configuring Screens on an XDS Remote Display

For certain IntelliVue monitor models, the XDS Remote Display (IntelliVue XDS solution) can be used as
second or third main display.
When you make changes to a Screen that is viewed on an XDS Remote Display, be aware of the following
implications:
• The changes are stored on the XDS Remote Display and not on the monitor.
22
Modifying an Existing Screen

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: