Download  Print this page

Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual Page 216

Patient monitor..
Hide thumbs

Advertisement

5 Screen & Profile Overview
Wave Options
The A Option purchased with the monitor defines the number of waves that can be shown on any Screen.
With A12, up to twelve waves can be shown on a Screen, with A06, up to six waves can be shown, and so
on.
Using the Screen Library
This Appendix lists the Screens that are supplied with the initial monitor configurations and the Screens
available in the demo configuration file. The demo configuration includes Screens that feature, for
example:
• Screen Trends, allowing you to display trend segments embedded in the Screen. These could be entitled
e.g.: G-08W-3Press-Split-ScreenTrend-xga-Rev004.rds.
• ST Snippets, allowing you to display the current ST snippets superimposed over the baseline snippet
permanently on the Screen. These could be entitled e.g.: C-05W-2Press-03ST-snippets-xga-Rev003.rds.
• Visitors Screen, allowing you to hide all waves and numerics for the duration of visiting time. This
could be entitled e.g.: G-visitor-screen01-xga-Rev005.rds
• Example of SXGA Screen. This could be entitled: G-12W-1x3ovl-2x2ovl-1split-sxga-Rev004.rds
Other Screens that are not included in the config files provided by the factory can be found in the screen
library of the Support Tool.
216
About the Screen Configurations

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: