Download  Print this page

Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual Page 203

Patient monitor..
Hide thumbs

Advertisement

Hardware Settings
Hardware Setting: Main Setup -> Hardware -> Video
Factory Defaults
Item Name
Standby/Boot
Display 1 - Resolution
Display 1 - Display
Type
Display 1 - Size
Display 2 -
2
Resolution
Display 2 - Display
2
Type
Display 2 - Size
Display 3 -
3
Resolution
Display 3 - Display
3
Type
Display 3 - Size
1.Setting can only be viewed, but not changed.
2.Setting only affects MX800 with Integrated Display Interface and MP90 with dual CPU monitors.
3.Setting only affects MP90 with dual CPU monitors with a connected D80 Intelligent Display.
Video Settings Configuration Implications
Standby/Boot This setting can be changed in service mode only. It lets you change the presentation
of the Standby/Boot Screen from the Classic look (photo of nurse and child in the background) to the
Basic (black background) look.
Resolution This setting can be changed in service mode only. It only affects MX800 and MP90
monitors with more than one CPU and allows you to set the correct display resolution for external display.
If you are using a display with a single fixed (native) resolution (such as LCD or Flat Panel displays), the
optimal display quality can only be reached if the configured Resolution matches the native resolution
of the display. Available choices range from 640x480(VGA) to 1280x1024(SXGA).
Display Type This setting can be changed in service mode only. It only affects MX800 and MP90
monitors with more than one CPU and lets you set the correct display type for an external display.
Available choices are LCD and CRT. The Display Type setting effects the available choices for the
setting Size (see below). This is necessary because the size measurement of a CRT display encompasses
the full face of the picture tube, including the part hidden by the bezel, whereas on LCD displays, only the
viewable screen is measured.
Oper.
MX800
Mode
C S M
x
Classic
x
WSXGA+
(1680x1050)
x
LCD
1
x
19"
x
WSXGA+
(1680x1050)
x
LCD
2
x
15"
x
not applicable
x
3
x
4 Configuration Settings Appendix
MP90
MP60/
MP40/
70
50
1
XGA (1024 x
SVGA
768)
1
LCD
1
15"
15"
12.1"
XGA (1024 x
not applicable
768)
15"
XGA (1024 x
768)
LCD
15"
MP20/
MP5
MP2/X2
30
not applicable
1
203

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: