Download  Print this page

Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual Page 197

Patient monitor..
Hide thumbs

Advertisement

Global Settings
3
Select Chg Printer Name and then use the pop-up keyboard to enter a name for the printer you
are currently configuring. Maximum length is 12.
Select Paper Size and set the paper size for reports printed on this printer.
4
5
Select Resolution and set the resolution at which reports should be printed.
Select Color Support to toggle to Monochrome for black and white printers or 8 Colors for
6
color printers. If your printer is not a color printer and you set this to color, reports will not print
correctly.
7
Select Duplex Option to toggle to Duplex if the connected printer can print double-sided
reports, or Simplex for single-sided print-outs.
Only one local printer can be connected to each monitor. You can use the second local port to print
reports from a second paper tray, if required.
Select the second printer in the list, and make sure Port is set to Local 2 and Printer
1
Status is set to Enabled.
Assign different names to the two paper trays, for example Bed4_USLettr and Bed4_Ledger.
2
3
Configure the other printer settings as required for the second paper tray.
Configuring a Centrally Connected Printer
These steps show you how to carry out a typical configuration for a monitor connected to a central printer.
In the Setup Printers menu, select the third printer in the list and make sure that Port is set
1
to Remote 1.
2
Set Printer Status to Enabled. Disabled means that no reports will be printed on the
printer. If this menu entry is grayed out, it means that no printer of this type is connected to the
specified port. Make sure that all other printers in the list are set to Disabled.
If the printer name is not sent from the Information Center, select Chg Printer Name and then
3
use the pop-up keyboard to enter a name for the printer you are currently configuring. Maximum
length is 12. If the printer name is defined at the Information Center, Chg Printer Name will be
unavailable ("grayed out").
(The settings described in steps 4 to 7 are only available if the service mode setting Config Printer is
set to Manual).
Select Paper Size and set the paper size for reports printed on this printer.
4
5
Select Resolution and set the resolution at which reports should be printed.
Select Color Support to toggle between Monochrome for black and white printers or
6
8 Colors for color printers.
The IntelliVue Information Center currently does not support color printers. If a black and white printer
is connected to your Information Center and you set Color Support for a remote printer to 8
Colors, reports will not print correctly.
7
Select Duplex Option to toggle to Duplex if the connected printer can print double-sided
reports, or Simplex for single-sided print-outs.
If only one remote printer is connected to the monitor, you can use the second and third remote printer
ports to print from different paper trays on the printer. The service mode setting Config Printer
must be set to Manual for this.
4 Configuration Settings Appendix
197

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: