Download  Print this page

Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual Page 179

Patient monitor..
Hide thumbs

Advertisement

Global Settings
Access Rights This settig determines how the XDS Remote Display can access the IntelliVue
monitor. The following choices are available:
• None: a connected XDS Remote Display can neither display information from the IntelliVue monitor,
nor remotely operate it.
• Viewing: a connected XDS Remote Display can display information from the IntelliVue monitor,
but not remotely operate it.
• Operating: a connected XDS Remote Display can both display information from the IntelliVue
monitor and remotely operate it.
Password To get access to the IntelliVue monitor from an XDS Remote Display, the same password
must be configured in both devices. The maximum length of the password is 16 characters. To reset the
password, overwrite it in both the monitor and the XDS software.
Standby Image This setting lets you change the presentation of the standby screen on the XDS
Remote Display. The following choices are available:
• Boot Image: the Standby screen shows the basic (black background) boot image.
• Moving Image: the Standby screen shows a black screen with an image moving across the screen,
similar to a screensaver.
• Blank: the Standby screen shows a black screen.
Configuring Setup Internal PC Settings
MX800
Global Setting: Main Setup -> Global Settings -> Internal PC
only
Factory Defaults
Item Name
Auto Start PC
PC Audio
Setup Internal PC Configuration Implications
These settings determin the start behavior of the Internal PC of a patient monitor.
Auto Start PC With this setting you enable or disable the automatic start of the internal PC when
the patient monitor is switched on. Choices are Disabled or Enabled.
PC Audio With this setting you enable or disable the audio output of the internal PC when the patient
monitor is switched on. Choices are Disabled or Enabled.
Configuring Timer Selection and Order
Global Setting: Main Setup -> Timers
Oper.
MX800
Mode
C M
x
Disabled
x
Disabled
4 Configuration Settings Appendix
179

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: