Download  Print this page

Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual Page 165

Patient monitor..
Hide thumbs

Advertisement

Unique Monitor Settings
Remote Control Keys
MX800
Unique Monitor Setting: Main Setup -> User Interface
MP20-90
only
Factory Defaults
Item Name
Oper. 1 RemCtrl
Oper. 2 RemCtr
1.Setting only available on MX800 or MP90 with more than one CPU.
Remote Control Key Configuration Implications
These setting let you configure the SmartKeys that appear when the SmartKeys hardkey on the Remote
Control is selected for Operator 1 and Operator 2.
Oper. 1 RemCtrl. This setting lets you configure the SmartKeys that appear when the SmartKeys
hardkey on the Remote Control is selected for Operator 1.
Oper. 2 Fn Keys. This setting is only available for MX800 with Independant Display Interface, or
MP90 monitors with more than one CPU board. If you have configured the MX800 or MP90 for two
operators, this setting lets you configure the SmartKeys that appear when the SmartKeys hardkey on the
Remote Control (assigned to Operator 2) is selected for Operator 2.
Oper.
MX800,
Mode
MP20 - MP90
C M Page 1
x
Strt/Stp NBP
Stop All NBP
Repeat NBP
Auto Size
Capture 12 Lead
ST Map
Zero Press
Freeze Waves
DelaydRecord
1
x
Strt/Stp NBP
Stop All NBP
Repeat NBP
Auto Size
Capture 12 Lead
ST Map
Zero Press
Freeze Waves
DelaydRecord
4 Configuration Settings Appendix
Page 2
Quick Admit
End Case
Standby
VitalsTrend
Calcs
Lab Results
Start C.0.
Wedge
RT Record
Quick Admit
End Case
Standby
VitalsTrend
Calcs
Lab Results
Start C.0.
Wedge
RT Record
165

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: