Download  Print this page

Philips IntelliVue MX800 IntelliVue MP2 Configuration Manual Page 128

Patient monitor..
Hide thumbs

Advertisement

4 Configuration Settings Appendix
Factory Defaults
Item Name
NBP Time
Wave Style
Wave Line Style
9
Display 3
Menu LineSpacing
Display Units
Alarm Limits
Auto Fill Waves
Show ST In Wave
Hide Alarm Info
8
Hide Keys
NBP Time
Wave Style
Wave Line Style
1.Profile SpotCheck for English language software only.
2.Setting can be changed in service mode only.
3.Setting not available in MP2/X2 monitors.
4.Setting not available in MP2/X2 and MP5 monitors.
5.Setting only affects monitors that have a built-in display.
6.Setting only available in monitors that can be operated on battery power.
7.Setting only applicable for monitors with two main displays.
8.Setting not applicable if display is the XDS Remote Display.
9.Setting only applicable for monitors with three main displays.
User Interface Configuration Implications
QRS Volume Sets the default volume of the QRS tone. The QRS tone is derived from either the ECG
or Pulse, depending on which is currently selected as the alarm source.
QRS Low Defines the minimum QRS tone volume that can be selected by the user while in monitoring
mode.
Prompt Volume Defines the volume of the tone the monitor emits to draw the user's attention to a
prompt message shown in the monitor's prompt/status line.
128
Oper.
MX800,
MX800,
Mode
MP20-
MP5-
MP90
MP90
(H10/20/
(H30)
40)
C M
Adult
Adult
Pedi
Pedi
Neo
Neo
x
Meas Time
x
Line
Filled
x
Thin
Medium
x
Wide
x
No
x
Yes
No
x
x Yes
No
x
No
Yes
8
x
No
x
No
x
Meas Time
x
Line
Filled
x
Thin
Medium
MP20 (M20/M21)
MP5SC
MP5#P05
MP5 (H10/20/40)
MP5T, MP5SC
Profile
Adult
Pedi
Neo
Line
Thin
not applicable, only up to two displays supported
Monitor Settings
MP2/X2
MP2/X2
Adult
Profile
Pedi
Outdoor
Neo

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: