Sony ICF-SW1005 Operating Lnstructions page 29

5
Set
the time
by
pressing outer buttons
of
JOG/MANUAL
TUNE/SCAN
while keeping
STANDBY 1
or
STANDBY 2
pressed. The STANDBY indicator and "SET" flash in the display
while pressing STANDBY 1 or STANDBY 2.
+
EX. Setting 7:15 to STANDBY 1
1~ I I I I
When the world time is displayed, the time display automatically
changes to the local time.
If you keep a JOG/MANUAL TUNE/SCAN pressed, the time will
change continuously.
6
Stop
pressing
STANDBY 1
or
STANDBY 2. The current time
appears in the display, and the STANDBY indicator will continue to
be displayed.
You can
set both the standby 1 and 2
at a time
When the standby
time
comes during
the other standby works, the next
standby will work with the appropriate
frequency.
If you set standby 1 and 2 to a same
desired time
Only the standby 1 will work.
When you use the.standby function
abroad
Since the standby time is linked to the
Local Tune, set the place you stay
as
the
local area before
presetting
the standby
time.
To check the preset standby time
Press STANDBY 1 or 2. When you have
already set the standby 1 or
2,
press
STANDBY 1 or 2 again
to
display the
preset standby time.
To change the preset standby time
Set
the desired standby time, and the
time previously set is erased.