Table of Contents
Advertisement
Water hardness
The water hardness level of the steam
oven is set to
Hard
trouble-free operation of the steam
oven, and to ensure that it is descaled
at the appropriate time, it is important
to set the water hardness level for your
area. The harder the water, the more
often the steam oven must be descaled.
–
Soft
< 8.4 °dH, < 1.5 mmol/l
–
Medium
8.4 - 14 °dH, 1.5 - 2.5 mmol/l
–
Hard
> 14 °dH, > 2.5 mmol/l
at the factory. For
Showroom programme
This function enables the steam oven to
be demonstrated in showrooms without
heating up. It should not be set for
domestic use.
Demo mode
If Demo mode is activated,
is switched on. The appliance will not heat
up
will appear when the steam oven is
switched on.
–
On
Touch the OK sensor for at least
4 seconds to activate Demo mode.
–
Off
Touch OK for at least 4 seconds to
deactivate Demo mode. The steam
oven can then be used as normal.
Settings
Demo mode
125
Advertisement
Table of Contents
