Download Print this page

NEC SV9100 User Manual page 5

Hide thumbs Also See for SV9100:

Advertisement

Phone System User Guide
Incoming Call/Message Waiting indicator light
Flashes red quickly when a call is ringing your phone; flashes green slowly when there is a new message in
your voicemail box. Found on the top of the display panel.
LCD display
Shows date and time, name and extension, when the phone is idle; incoming caller ID; outbound number dialed;
duration of call; number of new voicemail messages; message timestamp when in voicemail; and soft keys
(more info on these below).
Exit/Help
Use the Help key to identify the programming of function keys; the Exit key brings the LCD display back to
normal when in Help or Menu mode. Exit/Help keys found on left and right just under display panel.
Soft Keys (4)
The four "soft keys" below your telephone's display are provided as shortcuts to many of your phone's features
and functions. Below is a list of some of the most useful ones. Keep in mind, the soft keys are interactive and
will change their function as you press them to navigate features.
VMsg Use this soft key to access your voicemail box. Once pressed, other soft keys appear, allowing
you to visually access mailbox features.
List
Use this key to view recent calls. Outbound calls you have placed can be seen in the Redial
menu. Incoming Caller ID can be seen in the CID menu. Use the arrows to scroll through the
numbers. Press the Dial soft key to place a call to the number displayed.
Dir
Use the Directory menu to dial stored numbers. Use the arrows to scroll through the numbers.
Use the Exit button to return your phone's display to normal mode after using the soft key menus.
Function keys (8)
Programmable keys used for a variety of telephone features, eg: CAP, PARK, other extensions (hotline),
headset.
Keypad
As on any phone, dialing digits 0 – 9, #, *.
Recall
To move quickly between calls, use this key to disconnect one call and immediately get dial tone.
Feature
Used occasionally to access telephone feature setup.
Answer
Press to answer a second call ringing at your phone. First call will be put on hold automatically; to return to first
call, press flashing line key.
Mic
Press to turn microphone on (key will light up) or off. You must turn on the microphone in order to respond
handsfree to a speakerphone call. While on a handset or headset call, press Mic to mute microphone on
handset or headset (key will blink); press again to cancel mute.
Menu
Press to access other phone settings including ring volume, offhook ringing, backlight, etc.
KEYS AND BUTTONS ON YOUR PHONE
SPD
Common (system-wide) speed dial numbers
EXT
Internal extensions
STA
Personal speed dial numbers
- 5 -

Advertisement

loading