SERVER RSV-Z4000 INDEX Introduction Specifications Top Cover Disassembly 5.25" Device Installation 3.5" Device Installation Fan Filter Replacement Fan Replacement Installation Motherboard Installation Power Supply Installation USB cable Instructions Accessory Kit Index LED Indicators Illustration User Manual...
The RSV-Z4000 is a 19" rackmount industrial grade server PC, which is designed for extended ATX form factor server board and can be equipped with PS2 power supply or mini-redundant power supply. In addition, the RSV-Z4000 has a large-scale fan filter and a easy-to-use knob key for great serviceability of the system.
SERVER RSV-Z4000 Top Cover Disassembly 1.Release the thumb screws of the top cover 5.25” Device installation (A) 5.25” cage disassemblly 1.Release the screws of the cage (B) Dismount the front cover plate 2.Slide back the lop cover and lift up 2.Lift up the cage...
Page 5
SERVER RSV-Z4000 (C) CD-ROM installation 1.Place CD-ROM in the disk cage 3.Place the disk cage back to the case (D) Other device installation 2.Affix the CD-ROM to the disk cage with screws 1.Place D340 in the disk cage 2.Affix the D340 to the disk cage...
Page 6
SERVER RSV-Z4000 (E) HDD&FDD installation in 5.25” device cage 1.Fix the HDD bracket with HDD first 1.Place FDD in the lower disk cage 2.Affix the FDD to the disk cage with screws (F) Slim CD-ROM installation 2.Place HDD set in the disk cage 3.Affix the HDD bracket to the...
SERVER RSV-Z4000 3.5” Device installation (A) 3.5” cage Dismount 1.Release the screws from 3.5” cage (B) Metal cover plate dismount (C) 3.5” device installation 1.Place FDD into the 3.5” cage and affix with screws 2.Pull out and dismount the 3.5” cage 1.Release the screws of metal...
SERVER RSV-Z4000 Fan filter replacement Fan replacement installation (A) 12cm fan replacement 1.Release the screws from fan bracket on 5.25” device cage (B) 8cm fan replacement 1.Pull out the filter bracket and remove the used filter 2.Replace with new fan filter 3.Mount the filter bracket...
SERVER RSV-Z4000 Motherboard installation (A) Interface card bracket installation (B) Motherboard installation 1.Affix the standoffs on the M/B base 1.Release the screws from bracket 2.Remove the bracket from 45 2.Place the motherboard on the standoffs and affix with #6-32 screws...
Page 10
SERVER RSV-Z4000 (C) Interface installation 1.Plug the interface card to the motherboard slot 2.Affix the interface card bracket to the case by screw 3.Loose the thumb screws to adjust the hold down clamp to the interface card Note : Do Not take the screws out...
SERVER RSV-Z4000 4.Affix the hold sown clamp with thumb screws Power supply installation 1.Place the power supply into the case 2.Affix the power supply with screws User Manual...
2. Each pins has a function. please see the following list, and find the colors for the installation. 3. Have you any problems with the installation, please contact www.rosewill.com. We cannot give any quarantee when the components damaged by yourself.
Page 13
Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product.