Page 2
RSV-S4 can allow one SATA II 3Gbps port to communicate and connect to four (or five) SATA II 3Gbps hard drives by one eSATA single-lane cable. With Rosewill HDD controller RC-213 (Included in box) and RSV-S4, you can construct a RAID 0/1/0+1/5 data storage system to maximum your drivers size up to 2TB (500GB X4).
SERVER RSV-S4 1.2. Package Contents • Multi-sure System • This User’s Manual • eSATA External Cable • UL certified Power Cord • RC-213 Hard Drive Controller • RC-213 User Manual • Screws set • Internal SATA Cables Installation HDD1 Power...
Page 4
SERVER RSV-S4 Step 1 Unscrew three screws of MultiBay System. Step 3 Open the Front door of MultiBay System. Step 4 Install HDDs. Step 2 Open the cover of MultiBay System. Internal SATA cables may block the installation of the lowest hard drive.
Page 5
SERVER RSV-S4 Step 5 Fasten the screws to HDDs. Step 6 Connect SATA and Power Cables to Hard Drives and Bridge Board. User Manual...
Page 6
SERVER RSV-S4 Step 7 Close the Front door of MultiBay System. Step 10 Please install RC-213 according to RC-213 user manual . You need to install driver correctly in Windows before connecting to RSV-S4. Step 8 Fasten the cover of MultiBay System.
Page 7
Turn on the computer. Enter RC-213 SiliconImage RAID BIOS to complete RAID setting. ( If you don’t want to set any RAID, please skip this step and ENTER Windows directly.) Please Read RC-213 user manual carefully for more RAID setting information. User Manual...
Page 8
SERVER RSV-S4 Bridge Board Dimension & Placement Bridge Board Jumper and LED Pin Header P6 / P7 CHIP LED JP3 User Manual LED JP4...
Page 9
Power LED 34(JP3) System LED Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product. Description No function. Bridge board working & host port connecting.