Yamaha XG250 Service Manual page 50

1. Front brake hose
2. Throttle cable
3. Speedometer cable
4. Clutch cable
5. Headlight lead
6. Meter lead
A. Route the front turn signal light left lead
behind the speedometer cable and in
front of the clutch cable.
B. Fasten the front brake hose with a cable
guide. Possible to use synthetic deter-
gent or water as lubricant during assem-
bling the front brake hose.
C. Route the front turn signal light right lead
behind the front brake hose and throttle
cable and above the meter lead and
headlight lead.
D. Fasten the front brake hose and speed-
ometer cable with a cable guide. After
pushing the front brake hose into the
guide, route the speedometer cable to
the guide. Possible to use synthetic
detergent or water as lubricant during
assembling the front brake hose.
2-34
CABLE ROUTING