Mitsubishi Electric LCPU-U-HW Safety Manuallines page 41

(1)
POINT
• Failure to securely lock the module joint levers until they click may cause malfunction,
failure, or drop of the module.
• To slide the levers, use the projection of the lever. Sliding levers with other parts than the
projection may cause a difficulty of sliding.
• The metal parts of a module (such as the back side) may be heated to a high temperature
immediately after the power is turned off. Therefore, be careful not to burn yourself when
disconnecting a module.
5. Slide the levers toward the
back side of the module until
they click.
Make sure that the modules
are securely connected.
To lock the levers, push the
projection (1) of the lever.
40