1+1 PCIe Card RC214 Important Message for User before Installing RC-214: New HD connecting to RC-214 must process “initial (F-disk)” and “format” before using. Otherwise, PC might find nothing in the system. If you want to boot from correct HD connecting to either motherboard or RC-214, please change correct HD source from CMOS “booting sequence”.
Page 3
1+1 PCIe Card RC214 2.1. Windows NT 4.0, Windows 2000/Server 2003/XP/VISTA Fresh OS installation Follow the instructions in this section if you are performing a new installation of Windows NT 4.0, 2000/XP, Server 2003 and you wish to boot from a device attached to the SATA port.
Page 4
4. See instructions in section 2.4 to verify controller was installed correctly. Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product. User Manual...