Related Manuals for Rosewill R-BC-01
Summary of Contents for Rosewill R-BC-01
- Page 1 R-BC-01 User manual Ni-Cd Ni-MH DC SOCKET LED LIGHT (9V BATTERY) CHARGING (9V BATTERY) +POLE BATTERY SELECTION SWITCH -POLE BATTERY CHARGER BAY POWER LIGHT LED INDICATORS LCD DISPLAY...
- Page 2 LCD & LED Display Battery Function TYPE Discharge Ni-Cd Charging Fully charged Charging Ni-MH Fully charged Charging Alkaline Fully charged LED Indication LCD display word Yellow Green Green Green LCD capacity Indication Blinking downward Flashing upward Fully charged Flashing upward Fully charged Flashing upward Fully charged...
- Page 3 Battery can’t recharge Dear Customer, Thank you for purchasing the ROSEWILL universal battery charger. This product is an excellent environmentally friendly choice providing a comprehensive and versatile solution to keeping your batteries charged when you need them and minimizing battery waste.
- Page 4 Ni-Cd or Ni-MH batteries. However, the ROSEWILL Charger uses a recharge current of 130 mA and the entire charging process is controlled intelligently by microprocessor which can recharge most standard alkaline batteries to 75-90% of their original capacity upwards of 30+ times depending on the quality of the battery.
- Page 5 Never short-circuit the charging contacts or batteries. It is normal that batteries get warm during the charging procedure. Please handle re-charged batteries with care. The ROSEWILL universal battery charger must not come into contact with moisture or wetness. ...
- Page 6 Important safety instruction Before you use your new universal fast charger, please pay attention to the user’s manual and the safety instructions listed below. Never use the unit outdoors; it is designed only for use indoor use This charger is only suitable for the Ni-Cd(Nickel Cadmium) accumulators and the Ni-MH(Nickel Metal Hydride ) accumulators and Alkaline Don’t use extension cord for connection of the unit.
-
Page 7: Product Description
AAA accumulators with a capacity of 300 mAh can never be charged for more than 0.5 hours. Never connect other electric units or devices with a damaged main together. If the connection cord of this unit is damaged, it must be replaced by the manufacturer, its service person or a similar qualified person, in order to avoid danger. - Page 8 “DIS”& energy LCD indicator flashing downward ) whilst LED indicator is illuminated yellow Once the discharge cycle is completed , ROSEWILL Charger will begin the quick charge program (LCD blinking “CHA”& energy level indicator flashing upward ) whilst the LED indicator illuminates red.
-
Page 9: Charging Time
LCD & LED will have the same display as for charging Ni-Cd battery. Providing the fully charged batteries are not removed form the battery charging bays, The ROSEWILL Charger will automatically trickle charge the battery keeping it at its optimum capacity. CHARGING TIME In order to determine the approximate charge times the formula as below can be applied. -
Page 10: Warranty Information
This warranty applies only to the product and ROSEWILL Technologies, LLC is not responsible in any way for losses, damage or inconveniences caused by equipment failure. Proof of purchase is necessary to redeem warranty.
Need help?
Do you have a question about the R-BC-01 and is the answer not in the manual?
Questions and answers