Page 1
PS16 POWER CENTER The PS16 supplies the DC power and distributes the Monitor signal to up to ten of the PM50s, the PM50sOB, and the PM350 units. This dramatically increases efficiency and eliminates the need for multiple wall-warts and adapter cables.
Page 2
Monitor devices, and the Sleeve con- nects to ground. OUT 1 • Connect the Send of the mixer to the appropriate Input of the PS16 (balanced or unbalanced). • Connect the PS12 adapter to the 12VAC input of the PS16. The Power/ Status LED should light.
Need help?
Do you have a question about the PS16 and is the answer not in the manual?
Questions and answers