JVC TH-BC3 Instructions

ENGLISH
HOME THEATER SOUND SYSTEM
TH-BC3
Thank you for purchasing a JVC product.
Before operation, please read the instructions carefully.
INSTRUCTIONS
© 2011 Victor Company of Japan, Limited
CAUTION: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1. Front: No obstructions and open spacing.
2. Sides/Top/Back: No obstructions should be placed in the areas indicated by the dimensions in the illustration.
3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10
cm or more.
Front
15 cm
15 cm
15 cm
10 cm
Information for Users on Disposal of Old Equipment and Batteries
[European Union]
These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not
be disposed of as general household waste at its end-of-life. Instead, the products should be handed over to the
applicable collection points for the recycling of electrical and electronic equipment as well as batteries for proper
treatment, recovery and recycling in accordance with your national legislation and the Directive 2002/96/EC and
2006/66/EC.
By disposing of these products correctly, you will help to conserve natural resources and will help to prevent potential
negative effects on the environment and human health which could otherwise be caused by inappropriate waste
handling of these products.
For more information about collection points and recycling of these products, please contact your local municipal
office, your household waste disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
[Business users]
If you wish to dispose of this product, please visit our web page http://www.jvc.eu/ to obtain information about the
take-back of the product.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in accordance with applicable national legislation or other rules in
your country for the treatment of old electrical and electronic equipment and batteries.
Notice:
The sign Pb below the symbol for batteries indicates that this battery contains lead.
Battery
Products
W
arnings, Cautions and Others
CAUTION Dear Customer,
The button in any position does not disconnect the This apparatus is in conformance with the valid European
mains line. directives and standards regarding electromagnetic
Disconnect the mains plug to shut the power off compatibility and electrical safety.
completely (the STANDBY lamp goes off). The MAINS plug European representative of Victor Company of Japan,
or an appliance coupler is used as the disconnect device, Limited is:
the disconnect device shall remain readily operable. JVC Technical Services Europe GmbH
• When the System is on standby, the STANDBY lamp lights red. Postfach 10 05 04
• When the System is turned on, the STANDBY lamp goes off. 61145 Friedberg
The power can be remote controlled. Germany
CAUTION
Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
CAUTION
• Do not block the ventilation openings or holes. (If the
ventilation openings or holes are blocked by a newspaper
or cloth, etc., the heat may not be able to get out.)
• Do not place any naked flame sources, such as lighted
candles, on the apparatus.
• When discarding batteries, environmental problems must
be considered and local rules or laws governing the disposal
of these batteries must be followed strictly.
• Do not expose this apparatus to rain, moisture, dripping
or splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
GVT0327-007A[E]
0711WMKMDWJMM
EN
Playable iPod models • "Made for iPod" and "Made for iPhone" mean that an
electronic accessory has been designed to connect
• Compatible iPod:
specifically to iPod or iPhone, respectively, and
Made for Audio Video
has been certified by the developer to meet Apple
performance standards. Apple is not responsible for
iPod nano (6th generation) *
the operation of this device or its compliance with
iPod nano (5th generation)
safety and regulatory standards. Please note that the
iPod nano (4th generation)
use of this accessory with iPod or iPhone may affect
iPod nano (3rd generation) wireless performance.
• iPhone, iPod, iPod classic, iPod nano and iPod touch
iPod nano (2nd generation) –
are trademarks of Apple Inc., registered in the U.S.
iPod touch (4th generation)
and other countries.
iPod touch (3rd generation)
iPod touch (2nd generation)
• HDMI, the HDMI logo and High-Definition Multimedia
iPod touch
Interface are trademarks or registered trademarks of
iPod classic HDMI Licensing LLC.
• HDCP is the abbreviation of "High-bandwidth Digital
iPhone 4
Content Protection," and is the high-reliable copy
iPhone 3GS
control technology licensed by Digital Content
iPhone 3G Protection, LLC.
* Only for still picture
• In this manual, "iPod" means iPod, iPod touch and
• Also refer to the instruction manual for iPod.
iPhone device. When iPod touch or iPhone device
• If the NOT SUPP indicator is shown on the display, the
is especially referred to, "iPod touch" or "iPhone" is
connected iPod is not supported.
used.
• If iPod does not play correctly, update iPod software to
the latest version.
– For details about updating iPod, check on the Apple
•
web site <http://www.apple.com/>.
• StudioSound HD technology is incorporated under
license from SRS Labs, Inc.
• SURROUND: StudioSound HD by SRS Labs. SRS
StudioSound HD™ provides an immersive and
engaging surround sound experience, while
maintaining steady volume and delivering rich bass
and clear dialog.
• DRC: TruVolume by SRS Labs. TruVolume™ (designated
as DRC) maintains a steady volume for an enjoyable
viewing experience.
I
ntroduction
Auto power save function
When no operation is done in certain situations for 29
minutes, the unit turns off automatically. This function is
on at the initial setting. For details, refer to "Operations."
Notes on handling
Important cautions
Installation of the System
• Select a place which is level, dry, and neither too hot nor too cold; between 5°C and 35°C.
• Leave sufficient distance between the System and the TV.
• Do not use the System in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or
vibration.
• Install the System in a location with adequate ventilation to prevent internal heat buildup.
Power cord
• Do not handle the power cord with wet hands.
• A small amount of power is always consumed while the power cord is connected to the wall outlet.
• Do not pull on the cord to unplug the power cord. When unplugging the power cord, always grasp and pull the plug so
as not to damage the cord.
To prevent malfunctions of the System
• There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer.
• Do not insert any metallic objects or liquids into the System.
Safety precautions
Avoid moisture, water, and dust
Do not place the System in moist or dusty places.
Avoid high temperatures
Do not expose the System to direct sunlight and do not place it near any heating devices.
When you are away
When away on holiday or for other reasons for an extended period of time, disconnect the power cord from the wall
outlet.
S
pecifications
Output power 60 W (30 W + 30 W) at 4 Ω (10% THD)
Audio section
Analog Input ANALOG: 1 Vrms/50 kΩ
Digital Input* DIGITAL 1 (OPTICAL) :
–21 dBm to –15 dBm (660 nm ±30 nm)
DIGITAL 2 (COAXIAL) :
0.5 Vp-p/75 Ω
Speaker section
Type: Bass-Reflex Type
Speaker: Woofer: 8 cm cone × 4
Tweeter: 2.5 cm balance dome × 2
Power Handling Capacity: 30 W
Impedance: 4 Ω
Frequency Range: 82 Hz to 25 kHz
Sound Pressure Level: 88 dB/W•m
General
Power Source (DC IN): DC 19 V 3.37 A
AC adaptor (AA-R1904): Input: AC 100 – 240 V
50 Hz/60 Hz, 1.5 A – 0.9 A
Output: DC19 V
Power Consumption(in Standby mode):
0.50 W or less
Dimensions (W × H × D): 900 mm ×98 mm × 107 mm
Mass: 3.4 kg
is a trademark of SRS Labs, Inc. iPod
Output power: DC 5 V 1 A
HDMI
HDMI Input: HDMI 1 IN, HDMI 2 IN*
HDMI Output: HDMI OUT
Max. Capability: 1920 × 1080 at 60 Hz
Output power: DC 5 V 55 mA
* Corresponding to Linear PCM (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)
Designs & specifications are subject to change without notice.
Do not block the vents
In this manual, the remote control buttons are used for
Blocking the vents may damage the System.
explaining the operations unless mentioned otherwise.
Care of the cabinet
However, if the System has the same or similar button
• Stains on the System should be wiped off with a soft cloth. If the System is heavily stained, wipe it with a cloth soaked in
names, they can also be used for the operations.
water diluted neutral detergent and wrung well, then wipe clean with a dry cloth.
• Since the System may deteriorate in quality, become damaged or get its paint peeled off, be careful about the
following:
– DO NOT wipe it forcefully.
– DO NOT wipe it with thinners, benzines or other organic solvents including disinfectants.
– DO NOT apply any volatile substances such as insecticides to it.
– DO NOT allow any rubber or plastic to remain in contact with it for a long time.
• Do not place anything on top of the System. Doing so may cause the System to fall, causing malfunctioning and/or
injury.
• The manufacturer accepts absolutely no liability for any accidents or damage resulting from inadequate assembly or
mounting, insufficient strength of attachment, misuse or abuse, or natural disasters.
If water gets inside the System
Turn the System off and disconnect the power cord from the wall outlet, then call the store where you purchased this
System. Using the System in this condition may cause a fire or electrical shock.
Supplied accessories
Check to make sure you have all of the supplied accessories.
If anything is missing, contact your dealer immediately.
• Remote control RM-STHBC3A (× 1)
• AC adaptor (AA-R1904) (× 1)
• AC power cord
3 pin plug type (for UK) (× 1)
2 pin plug type (for other countries) (× 1)
• Lithium coin battery CR2025 (× 1)
– The battery has been installed in the remote control when shipped from the factory.
• Core filter (× 2)
• TV remote pass through cable (× 1)
• Double-sided adhesive tape (× 1)
T
roubleshooting
If you have a problem with this System, check this list for a possible solution before calling for service.
POWER
Power does not come on.
=
The power cord is not inserted securely. Plug it in securely.
The unit turns off suddenly.
=
Auto power save function is on. Refer to "Activating/deactivating APS (Auto Power Save)" in "Basic operation."
REMOTE CONTROL
The remote control does not work.
=
Pull out the insulation sheet.
=
Sunlight is shining directly on the remote sensor. Hide the remote sensor from direct sunlight.
=
The path between the remote control and the remote sensor on the front panel is blocked.
=
Point the remote control at the remote sensor on the front panel.
=
Signals cannot reach the remote sensor. Move closer to the unit.
=
The battery is exhausted. Replace the battery.
The remote control of the TV does not work.
=
If you install the unit near the TV, connect the TV remote pass through cable (supplied).
,
External components
No sound can be heard when DIGITAL 1 or DIGITAL 2 is selected as a source.
3.37 A
=
Check the output setting of the connected digital components. Set the output setting as the PCM signal is outputted.
iPod
iPod cannot be connected firmly.
=
Check to see whether the connector between iPod and the unit is not damaged, and connect it.
iPod does not provide sound.
=
iPod is not properly connected. Remove iPod from the unit, and then connect it again.
iPod cannot be charged.
=
iPod is not properly connected. Remove iPod from the unit, and then connect it again. After connecting iPod, turn on
the power again.
HDMI
No sound can be heard when HDMI 1 or HDMI 2 source is selected as a source.
=
Check the output settings on the HDMI connected devices. Set the audio output setting to PCM signal and enable
HDMI Audio Out.
No sound can be heard when TV ARC is selected as a source.
=
Check if your TV supports this function and turn on the settings for ARC and set the digital audio output setting to
PCM signal on your TV.