Roland SRA-200E Owner's Manual

Roland SRA-200E Owner's Manual

2 channel power amplifier

Advertisement

Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY INSTRUCTIONS" (p. 2),
"USING THE UNIT SAFELY" (p. 3), and "IMPORTANT NOTES" (p. 4). These sections provide important infor-
mation concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a
good grasp of every feature provided by your new unit, this manual should be read in its entirety. The manual
should be saved and kept on hand as a convenient reference.

Main Features

• Lightweight, Compact, and Energy-Efficient
Employing the latest developments in high-efficiency amplifier technology, the SRA-200E packs a powerful 100 watts per channel (at 8
ohms); yet it weighs a mere 5.0 kilograms, consumes only half the current, and generates just one-third the heat of previous power
amps (in actual operation, compared with previous Roland products). With its compact design, this amp takes up only 1U (1.75-inch
EIA standard rack space), and is only 360 mm deep.
• Packed with Features
The SRA-200E features three types of input connectors: XLR-3-31 connectors, standard phone TRS jacks, and screw type terminals.
All inputs are balanced. With the Input Level switch, input sensitivity can be switched between +4 dBm and -10 dBm, flexibility that
ensures compatibility with a variety of systems. The SRA-200E also features binding post output terminals which can accept either
banana plugs or wide-gauge speaker cables.
• Protection Circuits for Added Reliability
The SRA-200 features a variety of protection circuits, including the PC Limiter Circuit that guards against shorting in the output, the
Thermal Protection Circuit, the speaker-saving DC Detection Circuit, the Muting Circuit that cuts the "shock noise" that occurs when
the power is switched on, all to ensure dependable operation.
• The indicators let you know about signal conditions.
With the LEVEL indicator and PROTECTION indicator, you can check to be sure of the amp's operating conditions.
• Built-In Limiter
The SRA-200 features an internal Limiter Circuit. This provide protection against unpleasant sound and damage to speakers resulting
from clipping in the amp.
ECOS (Efficiency Control Operation System) is a new high-efficiency amplifier technology developed by Roland. With this technology,
amplifier power consumption is only 1/2 that of previous amps, while generating only 1/3 of the heat, all with no sacrifice in sound quali-
ty. As a result, the heat dissipation and power sections are smaller, making the amplifier lighter and more compact than previous mod-
els.
Using The Unit Safely.........................................................3
Important Notes ...................................................................4
Names and Functions..........................................................5
Front Panel .......................................................................5
Rear Panel.........................................................................6
Connecting Other Devices .................................................8
Stereo Connection ...........................................................8
BTL Connection ...............................................................8
Parallel Connection.........................................................9
Copyright
1998 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
New ECOS High-Efficiency Amplifier Technology
Contents
the Power........................................................................10
Tips about Connection .................................................11
About the Protection Circuits..........................................12
About Rack Mounting ......................................................13
Attaching the Rubber Feet ...............................................13
Troubleshooting.................................................................14
Main Specifications...........................................................15
Dimensions .........................................................................16
Index.....................................................................................17
01677290
'02-6-A2-51K

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SRA-200E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Roland SRA-200E

  • Page 1: Table Of Contents

    BTL Connection ...8 Parallel Connection...9 Copyright 1998 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. New ECOS High-Efficiency Amplifier Technology Contents Precautions When Connecting and Turning on the Power...10...
  • Page 2: Important Safety Instructions

    CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
  • Page 3: Using The Unit Safely

    • When using the unit with a rack or stand recom- mended by Roland, the rack or stand must be careful- ly placed so it is level and sure to remain stable. If not using a rack or stand, you still need to make sure that...
  • Page 4: Important Notes

    • When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials. • Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions.
  • Page 5: Names And Functions

    Names and Functions Front Panel 1. Attenuator This adjusts the level of what is output to the speakers. Adjust for the most suitable volume according to the input level of the connected device. * When set to BTL mode, volume is adjusted with the Channel A attenuator. (BTL Connection 2.
  • Page 6: Rear Panel

    Rear Panel INPUT 1. INPUT Connector (XLR-3-31 Type) * The pin assignment for the XLR type connectors is as shown below. Before making any connections, make sure that this pin assignment is compatible with that of all your other devices. 2.
  • Page 7 4. INPUT LEVEL Switch This switches the input sensitivity (+4 dBm/-10 dBm). Select the setting appropriate for use with your system. 5. MODE Switch Switches the unit between the STEREO and BTL modes. Select the mode that is appropriate for your configuration ( p.
  • Page 8: Connecting Other Devices

    Please refer to p. 10 and p. 11. Stereo Connection Channel A and Channel B may operate independently. In this mode, the SRA-200E functions as a stereo power amp, with 100 watts per channel (at 8 ohms). One SRA-200E connected to two speakers...
  • Page 9: Parallel Connection

    The input impedance of a single SRA-200E itself is 10 kiloohms (with balanced or unbalanced input). The total input impedance of "n" number of SRA- 200Es connected in parallel is "10/n"...
  • Page 10: Precautions When Connecting And Turning On The Power

    Use caution when connecting with unbalanced standard phone plugs. Quarter-inch Phone Type (Unbalanced) Although the SRA-200E is protected from damage by the PC Limiter Circuits, take care not to connect speakers rated at less than 4 ohms impedance or to allow shorting in the speaker cables.
  • Page 11: Tips About Connection

    9) * However, the amp features no mixing functions. Regardless of the input arrangement used, do not connect inputs to different connectors on the same channel simultaneously. Doing so may result in damage to the SRA-200E and other connected devices.
  • Page 12: About The Protection Circuits

    Speaker output is cut if the temperature of the amp's heat sink exceeds 100˚C. Stop operating the equipment for a short while to allow the heat to dissipate sufficiently. In addition, check the setup of the SRA-200E and rack, if rack- mounted, and take steps to allow enough circulation to carry away the heat generated by the amp.
  • Page 13: About Rack Mounting

    (see figure below). To ensure efficient cooling when rack mounting the SRA-200E or in similar setups, be sure to note the fol- lowing points. Set up the unit in a site with good air circulation. In particular, make sure that there is nothing impeding the air flow that needs to reach the rear panel's air vent.
  • Page 14: Troubleshooting

    When DC (direct current) is generated in the output sent to the speakers, the DC Detection Circuit cuts off the sound to protect the speakers. The SRA-200E restarts a few seconds after generation of direct current in the output ceases.
  • Page 15: Main Specifications

    Main Specifications • Rated Power Output 100 W x 2 (stereo, 8 ohms load, 1 kHz, 0.1 % or less THD) 150 W x 2 (stereo, 4 ohms load, 1 kHz, 0.1 % or less THD) 300 W (BTL, 8 ohms load, 1 kHz, 0.5 % or less THD) •...
  • Page 16: Dimensions

    Dimensions...
  • Page 17: Index

    Index Air Vent ...7,13 Attaching the Rubber Feet ...13 Attenuator ...5,8 Banana Plug ...11 Binding Posts ...7,11 BTL Connection ...8,9 Cooling Fan ...7,13 DC Detection Circuit...12 Front Panel ...5 INPUT Connector...6 Jack ...6 Terminals ...6 INPUT LEVEL Switch ...7 LEVEL Indicator...5 Limiter...10 MODE Switch ...7,8 Muting Circuit ...12...
  • Page 18: North America

    Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. SINGAPORE AFRICA AFRICA Swee Lee Company 150 Sims Drive, EGYPT SINGAPORE 387381 TEL: 6846-3676 Al Fanny Trading Office...

Table of Contents