Adjusting The Movable Knife Holder Left And Right; Adjusting The Movable Knife Front To Back - KANSAI SPECIAL WX8803/UTC Instruction Manual

5 5 5 5 - - - - 4 Adjusting the mov 4 Adjusting the mov 4 Adjusting the mov

4 Adjusting the movable knife holder left and right

With movable knife A at the extreme left end of its
travel, there should be a distance of 23mm from the
center of the needle bar to the point of movable knife A.
■When the movable knife is at the extreme right end of
its travel, Align the part (a2) of movable knife (A)
parallel with the part (r1) of knife holder plate (R).
■Easy test for checking the correct travel of the movable
knife is to agree the mark (T) of driving lever (M) to the
mark (t) of knife holder plate (R) at the extreme right
end or left end of its travel. The left side is a standard
position for the mark (N) of guide lever ring (R).
■Adjustment is made by loosening the screw (B) of connecting lever (E) and moving guide
bar (D) on right and left. Use lever (M) for final slight adjustment. Normal setting
aligns the right end (e) of connecting lever (E) level with the step position (d) of guide bar
(D).
5 5 5 5 - - - - 5 Adjusting the 5 Adjusting the
5 Adjusting the 5 Adjusting the
movable movable movable movable knife knife knife knife
front to back front to back front to back front to back
To adjust the movable knife front to back, alignment
line (S) of movable knife over the looper with the point
of movable knife 13mm moved to the left from the right
end of looper. To adjust, when loosening screw U and
turning lever ring P clockwise, the movable knife point moves forward and turning it
counterclockwise, the point moves backward.
able knife holder left and right able knife holder left and right able knife holder left and right
4