Important Notes - Roland VXpanded VS-880 Owner's Manual

Digital studio workstation
Hide thumbs Also See for VXpanded VS-880:
Table of Contents

Advertisement

Important notes

In addition to the items listed under ÒIMPORTANT SAFE-
TY INSTRUCTIONSÓ and ÒUSING THE UNIT SAFELYÓ on
pages 2 and 3, please read and observe the following:
Power Supply
Do not use this unit on the same power circuit with any
device that will generate line noise (such as an electric
motor or variable lighting system).
Before connecting this unit to other devices, turn off the
power to all units. This will help prevent malfunctions
and/or damage to speakers or other devices.
Placement
Using the unit near power amplifiers (or other equip-
ment containing large power transformers) may induce
hum. To alleviate the problem, change the orientation of
this unit; or move it farther away from the source of
interference.
This device may interfere with radio and television
reception. Do not use this device in the vicinity of such
receivers.
Do not expose the unit to direct sunlight, place it near
devices that radiate heat, leave it inside an enclosed vehi-
cle, or otherwise subject it to temperature extremes.
Excessive heat can deform or discolor the unit.
Maintenance
For everyday cleaning wipe the unit with a soft, dry
cloth or one that has been slightly dampened with water.
To remove stubborn dirt, use a cloth impregnated with a
mild, non-abrasive detergent. Afterwards, be sure to
wipe the unit thoroughly with a soft, dry cloth.
Never use benzene, thinners, alcohol or solvents of any
kind, to avoid the possibility of discoloration and/or
deformation.
Repairs and Data
Please be aware that all data contained in the unitÕs
memory may be lost when the unit is sent for repairs.
Important data should always be backed up on a DAT
recorder or an external disk drive (e.g., hard disk or MO
disk). During repairs, due care is taken to avoid the loss
of data. However, in certain cases (such as when circuitry
related to memory itself is out of order), we regret that it
may not be possible to restore the data, and Roland
assumes no liability concerning such loss of data.
Disk drive handling
Disk drives are precision devices. When handling a VS-880
that has an internal hard disk installed, or when handling
an external disk drive, observe the following precautions.
For details on hard disk handling, refer also to the
instructions that accompanied your hard disk.
Before performing the following actions, be sure to per-
form the shut-down operation. If you fail to perform the
shut-down operation, not only the data recorded on the
hard disk, but also the hard disk itself may be damaged.
Turning off the power of the disk drive
Turning off the power of the VS-880
Removing a disk from a removable disk drive
While the MIDI/DISK indicator of the VS-880 or the disk
drive busy indicator is lit, data is being transferred to or
from the disk drive. If you are using a removable disk
drive, make sure that this indicator is dark before remov-
ing the disk.
Place the unit in a stable and level location that is not
affected by vibration from external sources. If the unit is
tilted severely, this may have harmful effects on the
operation of the disk drive.
While using the VS-880, be careful not to subject the unit
to vibration or shock, and avoid moving the unit while
the power is turned on. When transporting the unit, pack
it in its original shipping carton.
Avoid using the unit immediately after it has been
moved to a location with a level of humidity that is
greatly different than its former location. Rapid changes
in the environment can cause condensation to form
inside the drive, which will adversely affect the opera-
tion of the drive and/or damage removable disks. When
the unit has been moved, allow it to become accustomed
to the new environment (allow a few hours) before oper-
ating it.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents