Midi Related; Using Program Change Messages To Select Scenes; Using Program Change Messages To Select Effects; Using Control Change Messages To Control Effects - Roland VXpanded VS-880 Owner's Manual

MIDI related

Using program change mes-
sages to select scenes
MIDI program change messages transmitted from an exter-
nal MIDI controller can now select Scenes.
1. Press [SYSTEM] several times until the display indi-
cates "SYS MIDI PRM ?".
2. Press [YES].
3. Press PARAMETER [
play indicates "SYS MID:P.C.Scne=".
4. Rotate the TIME/VALUE dial.
P.C.Scne (Program change scene)
Off: Program change messages will not be received
(same as Ver.1)
On: Program change messages will be received to select
Scenes
5. Press [PLAY(DISPLAY)].
You will return to Play condition.
Use the MIDI channel 15 to switch Scene.
The following chart shows the relationship between the
Program Number received by the VS-880, and the Scene
Number that is switches to.
Program No. Scene No.
1Ð8 1Ð8
* For details refer to the separately sold MIDI
Implementation.
< While a song is playing back >
It is not possible to change Scenes while a song is playing
back.
Thus, if a program change message for selecting Scenes is
received while a song is playing back, the song will be
halted. Then the Scene will be switched, and playback will
resume. During recording, program change messages are
not received.
] several times until the dis-
Chapter 1 Trying out the expanded functions
Using program change mes-
sages to select effects
MIDI program change messages transmitted from an exter-
nal MIDI controller can now select effects.
1. Press [SYSTEM] several times until the display indi-
cates "SYS MIDI PRM?".
2. Press [YES].
3. Press PARAMETER [
MID:P.C.Eff=" display appears.
4. Rotate the TIME/VALUE dial.
P.C.Eff (Program change effect)
Off: Program change messages will not be received
(same as Ver.1).
On: Program change messages will be received to select
effects.
5. Press [PLAY(DISPLAY)].
You will return to Play condition.
Use the MIDI channel 1 to switch EFFECT1, and use the
MIDI channel 2 to switch EFFECT2.
The following chart shows the relationship between the
Bank Number and Program Number received by the VS-
880, and the Effect Patch Number that is switches to.
Bank No.MSB Bank No.LSB Program No.
0 0 1Ð100
0 1 1Ð100
0 2 1Ð100
* For details refer to the separately sold MIDI
Implementation.
Using control change mes-
sages to control effects
MIDI control change messages transmitted from an external
MIDI controller can now control effects.
1. Press [SYSTEM] several times until "SYS MIDI PRM?"
appears.
2. Press [YES].
3. Press PARAMETER [
MID:C.C.Eff=" appears.
4. Rotate the TIME/VALUE dial.
C.C.Eff (Control change effect) [Off, On]
Off: Control change messages will not be received
(same as Ver.1).
On: Control change messages will be received to con-
trol effects.
5. Press [PLAY(DISPLAY)].
You will return to Play condition.
* If you wish to use control change messages to switch
effects, use NRPN (Non Registered Parameter Numbers).
For details refer to the separately sold MIDI
Implementation.
] several times until the "SYS
Patch No.
Preset A00ÐA99
Preset B00ÐB99
User U00ÐU99
] several times until "SYS
43