Glossary - Roland VXpanded VS-880 Owner's Manual

Digital studio workstation
Hide thumbs Also See for VXpanded VS-880:
Table of Contents

Advertisement

Glossary

COSM
COSM stands for Composite Object Sound Modeling. This
is Òa technology which combines multiple sound models to
create new sounds,Ó which was first used on the RolandÕs
VG-8 V-Guitar System. For example, sounds created on the
VG-8 are the result of a variety of sound models (elements)
such as the pickup, the body of the guitar, the guitar amp,
mic, and speaker etc.
When a VS8F-1 effect expansion board is installed, the VS-
880 will be able to apply effects using COSM (such as guitar
amp simulation) without the need for any other equipment.
(p.46)
MTC
MTC stands for MIDI Time Code. This is a group of mes-
sages which are transmitted and received between MIDI
devices to synchronize their operation. Unlike MIDI Clock
messages, MTC specifies an absolute time. Like SMPTE time
code, MTC also supports a variety of frame rates. If you wish
to use MTC to synchronize the operation of two devices,
both devices must be set to the same frame rate. (p.86)
RSS
RSS stands for Roland Sound System. This is an effect
which allows a sound source to be placed in three-dimen-
sional space when played back on a conventional stereo sys-
tem. The sound can be placed not only in front of the listen-
er, but also directly to the side, above, below, and behind
the listener. (VS8F-1 OwnerÕs manual p.33)
S/P DIF
S/P DIF stands for Sony/Philips Digital Interface Format.
This is a specifications for transmitting and receiving stereo
digital audio signals between digital audio devices. The VS-
880 provides coaxial connectors which support S/P DIF.
(p.72)
SMPTE time code
This is a signal format defined by the American organization
SMPTE (Society of Motion Picture and Television Engineers)
which is used to synchronize the operation of video or audio
devices. SMPTE specifies Òhours:minutes:seconds:framesÓ to
indicate the address of each frame of a video image. For this
reason, there are a variety of frame rates.
Auto mix
This is data which records INPUT TRACK, INPUT MIX,
TRACK MIX and Master block settings of the mixer. Mixer
settings for a specific time location are referred to as a
Snapshot. Data which records time-variant changes in
mixer settings such as fade-in or fade-out is referred to as
Realtime data.
Scene
This is data which records INPUT TRACK, INPUT MIX,
TRACK MIX and Master block mixer settings and effect set-
tings for a specific moment in time. Even after mixing oper-
ations have been performed repeatedly, a Scene can be
recalled to instantly restore the settings for fader, pan and
effect algorithm etc. that were in use when the Scene was
stored. (p.51)
Sync track
This is a track provided separately from the audio recording
track, for the purpose of recording MIDI Clock data. The
Sync track records the MIDI Clock messages that are trans-
mitted from a MIDI sequencer etc. By transmitting these
MIDI Clock messages back to the MIDI sequencer, it will be
possible to synchronize even to a song that contains com-
plex tempo changes. In this case, the VS-880 will be the mas-
ter and the MIDI sequencer will be the slave. (p.91)
Scrub
This is an editing technique in which a very short section of
audio is played back repeatedly while you move the current
time location, similar to the result of manually moving a reel
of analog tape while it remains in contact with the playback
head. This is a convenient way to ÒcueÓ a desired location in
the recording. Since the playback pitch and formats will not
change, cueing is possible with substantial accuracy. (p.77)
Tempo map
Data describing the songÕs measures, beats and tempo. By
transmitting this data to a MIDI sequencer etc., synchro-
nized operation with an external MIDI device is possible.
(p.89)
Vari-pitch
When a song is played back on the VS-880, this function
allows the playback speed of the song can be adjusted in
order to match the pitch with instruments whose tuning is
not easily changed.
145

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents