Easy Usage Menu (Control Panel: Menu Par -> P9) - Honeywell SmartVFD COMPACT User Manual

76
10.11 EASY USAGE MENU (CONTROL PANEL: MENU PAR -> P9)
13.2 D
RIVE SETUP
With this parameter you can easily set up your drive for four different applica-
tions.
Note! This parameter is only visible when the Startup Wizard is active. The
startup wizard will start in first power-up. It can also be started as follows. See
the figures below.
NOTE! Running the startup wizard will always re-
turn all parameter settings to their factory defaults!
READY RUN
REF
MON
PA R
FLT
Figure 10.17: Startup wizard
10
Parameter Descriptions
STOP A LARM FAULT
READY RUN
REF
MON
PAR
FLT
1 Press STOP
2
for 5 seconds
in main menu
PERFORM THE SAME
4
PROCEDURE FOR PAR. 1.4,
MOTOR NOMINAL CURRENT
Alternates
in the display
STOP ALARM FAULT
REF
MON
PAR
rp m
FLT
Push to enter edit mode
PERFORM DRIVE SETUP,
5
PAR. 13.2, SEE NEXT PAGE
Honeywell
READY R UN STOP ALARM FAULT
3
Select motor
nominal speed
and push
to confirm.