24
Version (1st tier)
The VERSION menu allows you to check the software version of the panel and phone module
(DTIM) by using the following 2nd tier menus.
PANEL (2nd Tier)
This setting allows the user to display the panel software and hardware version installed.
¾
To display the Panel version:
Press # to display the current panel software and hardware version.
PHONE MODULE (2nd Tier)
This setting allows the user to display the DTIM software and hardware version installed.
¾
To display the Phone Module version:
Press # to display the current phone module software and hardware version.
Exiting User Programming Mode
After all user programming is completed, use the following procedure to exit programming
mode.
¾
To exit programming mode:
Press * until
is displayed
EXIT
and then press #. The current time will be displayed.
(VERSION—)
(VERSION—)
User Programing Menu Items