Download  Print this page

Ac Fail (2nd Tier); Low Cpu Battery (2nd Tier); Phone Test (2nd Tier); Siren (lst Tier) - GE 60-874-95R Installation Instructions Manual

Hide thumbs

Advertisement

Note
Panel will not call in a low CPU
battery within the first 24 hours
of being powered up.
20

AC FAIL (2nd Tier)

(Default = off, UL installations = on)
When AC Failure is on, the panel reports to the central station 15 minutes after AC power to
the panel is lost.
¾
To turn AC failure reports on or off:
Š Press # to turn on or off.

LOW CPU BATTERY (2nd Tier)

(Default = on, UL installations = on)
When this setting is on, the panel reports a low panel battery to the central station.
¾
To turn low CPU battery reports on or off:
Š Press # to turn on or off.

PHONE TEST (2nd Tier)

(Default = on)
This setting determines if the user can, at any time when disarmed, test the communication
between the panel and the central station. If a DTIM is installed with the system:
The panel sends a packet to the DTIM informing it to send a phone test report to the central
station. The report will be sent out immediately.
The DTIM will send a successful or failed phone test message to the panel.
The panel will display
The panel will display
If a central station phone number is not programmed the panel will not display the option to
do a phone test.
If a DTIM is not enrolled the panel will not display the option to do a phone test.
High or Low level reporting must be on.
¾
To turn the phone test setting on or off:
Š Press # to turn on or off.

Siren (lst Tier)

The SIREN menu allows you to set up the following siren options:
SIREN TIME OUT
TROUBLE BEEPS
ALARM VOLUME

SIREN TIME OUT (2nd Tier)

(Default = 4 minutes, Parameters = 1-30, UL installations = 4 minutes)
Siren Time-out determines how long sirens sound if no one is present to disarm the system.
¾
To set Siren Time Out:
Š Press #, enter the desired time and then press #.

TROUBLE BEEPS (2nd Tier)

(Default = on, UL installations = on)
When this setting is on, the panel will beep to alert users of system trouble.
¾
To turn Trouble Beeps on or off:
Š Press # to turn on or off.
, if the phone test is unsuccessful.
PHONE TEST FAILURE
, if the phone test is successful.
TEST PASS
(REPORTS—)
(REPORTS—)
(REPORTS—)
(SIRENS—)
(SIRENS—)
Installer Programming Menus

Advertisement

   Also See for GE 60-874-95R

   Related Manuals for GE 60-874-95R

This manual also for:

Allegro

Comments to this Manuals

Symbols: 0
Latest comments: