Dial Dly (2Nd Tier); Pre-Dial String (2Nd Tier); Dtmf Dial (2Nd Tier); Devices (1St Tier) - GE 60-874-95R Installation Instructions Manual

Hide thumbs Also See for 60-874-95R:
Table of Contents

Advertisement

Note
Fire alarm reports to the cen-
tral station cannot be aborted.
Note
The pre-dial string is not accessi-
ble if a Dealer Code is pro-
grammed and the Installer Code
is used to enter installer pro-
gramming mode. To access the
pre-dial string option when a
Dealer Code is programmed, you
must enter installer programming
mode using the Dealer Code.
Note
See Table B7, in Appendix B
for more information on sen-
sor groups.
The Carbon Monoxide
Detector must be changed
to sensor group 34 to ensure
proper supervision.
10

DIAL DLY (2nd Tier)

(Default = 30 seconds, Parameters = 15-120 seconds)
Alarm reports from sensors in groups 00–04, 06, 08-10, and 13-20 can be aborted. To abort the
dialing attempt, the user must disarm the system within the Dial Delay time setting. Cancel and
restoral reports from these sensor groups are aborted at the same time. The following reports
can also be aborted.
System Tamper Alarm/Cancel
Touchpad Police and Emergency Panic/Cancel
Forced Arming
Recent Closing
¾
To set the Dial Delay:
Š Enter the desired amount of time (15-120 seconds) and then press #.

PRE-DIAL STRING (2nd Tier)

(Default = none, Parameters = 8 digits; 0-9, *, #, pause)
This feature lets you set up a dialing prefix to disable the call waiting feature before the panel
makes its first dialing attempt to any programmed central monitoring station or downloader
phone number. The prefix can be up to eight digits. Contact your local phone company for call
waiting disable numbers and characters. See Number 1 and 2 (3rd Tier) on page 8 for informa-
tion on how to program *, #, and pause characters.
¾
To set the Pre-Dial String:
Š Enter the desired numbers and then press #.
¾
To delete Pre-Dial String:
Š Press # twice. Once to delete the code and again to accept the command.

DTMF DIAL (2nd Tier)

(Default = On)
This setting determines whether the panel uses DTMF tones (On) or pulse (Off) for dialing pro-
grammed phone numbers.
¾
To turn DTMF dialing on or off:
Š Press # to turn it on or off.

Devices (1st Tier)

Devices include a HW sensor, RF sensors, RF touchpads, and other RF devices such as the
DTIM. The following 2nd tier menus allow you to set up devices:
ADD
DELETE
REVIEW
TEXT
Table 2: Sensor Group Assigned to Device
Keyfob or RF Touchpad
Portable Panic
HW Input
DWS
Carbon Monoxide Detector
(See Note)
PIR
Device
Sensor Group
1
1
10
10
10 (See Note)
17
(PHONES—)
(PHONES—)
(PHONES—)
Installer Programming Menus

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Allegro

Table of Contents