Balboa TP800/3 Quick Reference Card

TP800/3 BP/4 BP Series Quick Reference Card
Start Up
When power is switched on to supply power, a logo screen will appear on the display. If no button is pressed, a LINK message will appear. Press any
button to link the panel with the system.
Soon after power-up, the spa will enter Priming Mode and the Spa Screen will appear. Navigate to the
Jets Buttons by using the Up, Down, Left, and Right Buttons . When a
particular Jet button is highlighted, press Select to turn that pump on and off, verifying that all
Exit Jets 1 Jets 2 Jets 3 Circ
air is purged from the plumbing, particularly the plumbing associated with the heater (Heater Pump). If
the spa uses a circulation pump, the Circ Button
can be used to manually turn the Circ Pump on
and off during Priming Mode only. Priming Mode will end automatically in 4 minutes. Selecting the Exit
Button
will exit Priming Mode manually and the Main Screen will be displayed. When Priming Mode
ends (and the spa is in Ready Mode), the Heater Pump will start, yet the water temperature will not
appear until the water temperature is recognized by the system. If the water is below the
Set Temperature, the heater will start.
Priming Mode
Basic Operation
The Set Temperature is changed by navigating to the left while on the Main Screen. Once the Set Temperature is highlighted, adjust the temperature
68.143%
using the Up and Down Buttons. (The Set Temperature and the actual water temperature are often different.) Press-and-hold for faster adjustment.
The new Set Temperature is programmed immediately and the spa will now heat to the new Set Temperature.
Programming
Refer to the Refer to the 3 BP/4 BP User Guide for detailed operation, programming and message instructions.
Navigating the deeper menu structure is done by selecting one of the items on the right side of the Main Screen.
Selecting "Settings" will allow access to a variety of programming functions.
Depending on the screen displayed, waiting between 10 and 30 seconds will allow the panel to return to normal operation and a display of spa status.
To access the entire handbook please visit our website at www.catalinaswimspas.com or
www.catalinaspas.com and click on the support tab for end users.