Kärcher K2000 Original Instructions Manual page 17

Symptom
Spray wand
leaks
Pump is noisy
Water leaks
from pump
(up to 10
drops per
minute is
permissible).
Oil Drip
If the symptom you are
experiencing is not listed above, or
if the provided solutions do not
solve your issue, please visit our
extensive online troubleshooting
database at:
USA/Canada:
www.karcher-help.com
Mexico:
www.karcher.com.mx
Or Call:
1-800-537-4129
Cause
Spray wand not
properly attached.
Broken o-ring or plastic
insert.
Pump is sucking in air.
Loose fittings.
Water seals are
damaged or worn.
Oil Seals are
damaged or worn.
Solution
Insert the spray wand into the trigger
gun. Carefully press in against the
spring tension and twist into the
locked position.
Visit www.karcher-help.com or locate
a service center.
Check that hoses and fittings are air
tight. Turn off machine and purge
pump by squeezing trigger gun until a
steady flow of water emerges through
the nozzle.
Tighten fittings.
Visit www.karcher-help.com or locate
a service center.
Visit www.karcher-help.com or locate
a service center.
English 17