Advertisement
PRESET/TUNE +/-,
/
buttons
ALARM TIME
SET + button
ALARM A button
ALARM TIME
SET - button
CLOCK/MODE
button
DISPLAY/MEMORY
button
SNOOZE/BRIGHTNESS
iPhone
iPhone button
RADIO
RADIO FM/AM
FM/AM
button
VOL +/- buttons
ALARM TIME
SET + button
ALARM B button
ALARM TIME
SET - button
SLEEP button
AUDIO IN
button
DC IN 6V jack FM wire aerial
The VOL +, PRESET/TUNE +,
and iPhone
buttons have a tactile dot.
The VOL + and buttons have a tactile dot.
Operating an iPhone
Operating the radio
1
–Manual tuning
Set the iPhone on the Dock connector.
The Dock connector can be tilted slightly.
1
Press FM/AM to turn on the radio.
For details, see "Using an iPhone with the unit. "
2
Press .
2
Press FM/AM repeatedly to select the desired
"iPhone" appears in the display.
band.
The iPhone begins to play back.
Each time you press the button, the radio band toggles
If the iPhone does not start playing back, operate directly on
between AM and FM as follows:
the iPhone.
You can operate the connected iPhone via this unit or the
iPhone itself.
3
Adjust the volume using VOL + or –.
3
Press CLOCK/MODE repeatedly to select
To operate from a remote
"TUNING. "
When using the remote to operate the unit, you can skip this
control
step, and directly operate step 4.
4
Press TUNE + or – repeatedly to tune to the
Aim the remote at the
(Remote sensor) of the unit.
desired station.
(Play/Pause)
5
Adjust the volume using VOL + or –.
Start playing the iPhone. Press again to pause/resume
To turn off the radio, press OFF.
playback.
Note
(Forward)
Go to the next track.
When the FM frequency step is 0.05 MHz, the frequency
Press and hold while listening to the sound to locate a
display is accurate to within 0.1 MHz. For example, 88.00 MHz
desired point.
or 88.05 MHz will be displayed as "88.0 MHz. " In this case, press
TUNE + or – once to change the frequency step, twice to
(Backward)
change the frequency display.
Go back to the previous track. During playback, this
–Scan tuning
operation returns to the beginning of the current track. To
go back to the previous track, press twice.
Press and hold while listening to the sound to locate a
The unit automatically scans for AM or FM stations.
desired point.
1
Follow steps 1 to 3 in "Manual tuning. "
MENU
2
Press and hold TUNE + or –.
Go back to the previous menu.
+ : scans upward through the frequency bands.
(Up)/ (Down)
– : scans downwards through the frequency bands.
Select a menu item or track for playback.
Scanning starts from the currently-tuned frequency. When a
ENTER
station is received, scanning stops.
Execute the selected menu item or begin playback.
3
Adjust the volume using VOL + or –.
Notes
–Preset tuning
If a pop-up message appears in the display of the iPod touch
You can preset up to 20 FM stations and 10 AM stations.
or iPhone, see "About App. "
Some operations may differ or may not be available on some
To preset a station
models of iPhone.
If the iPhone is already playing when set on the unit, the
1
Follow steps 1 to 5 in "Manual tuning" and
sound from the iPhone will be output from the unit speaker,
even if the unit was playing sound from another function.
manually tune into the station you wish to
If the battery of the iPhone is extremely low, charge it for a
while before operation.
preset.
Sony cannot accept responsibility in the event that data
2
Press and hold DISPLAY/MEMORY for at least
recorded to an iPhone is lost or damaged when using the
iPhone connected to this unit.
2 seconds.
For details of environmental conditions for operating an
3
Press PRESET + or – to select the preset number,
iPhone, check the website of Apple Inc.
MENU, (Up), (Down), and ENTER button on the main unit
then press DISPLAY/MEMORY.
and/or on the supplied remote control will only work with the
Example: The following displays appear when you preset FM
Apple devices (iPhone/iPod touch) installed up to iOS 6. It will
not work with iOS 7 or later. In such case, please operate on
the screen of Apple devices directly.
The display shows the frequency for about
10 seconds, then returns to the current time.
Tips
To preset another station, repeat these steps.
To cancel the preset number setting, press OFF instead of
DISPLAY/MEMORY in step 3.
Note
If you store another station with the same preset number, the
previously stored station will be replaced.
To tune in to a preset station
1
Follow steps 1 to 2 in "Manual tuning" and
select the AM or FM band.
2
Press CLOCK/MODE repeatedly to select "PRESET. "
Dock
When using the remote to operate the unit, you can skip this
connector
step, and directly operate step 3.
3
Press PRESET + or – to select the desired
preset number.
4
Adjust the volume using VOL + or –.
–Auto preset tuning
1
Follow steps 1 to 2 in "Manual tuning" and
select the AM or FM band.
2
Press and hold FM/AM until "AP" flashes in the
display.
3
Press DISPLAY/MEMORY.
The unit automatically presets the available stations in order.
Tip
SNOOZE/BRIGHTNESS
To stop auto preset tuning, press FM/AM.
button
To switch the display when listening to radio
When listening to radio, press DISPLAY/MEMORY repeatedly to show
ALARM
RESET
the preset number, the frequency of the current station, the date and
month, then the year. The display then returns to the current time.
OFF
ALARM RESET/OFF
button
Note
When listening to a station which has not been preset, no
Remote sensor
preset number will be displayed.
To improve reception
FM: Extend the FM wire aerial fully to increase reception sensitivity.
AM: Connect the supplied AM loop aerial to the unit. Rotate the
aerial horizontally for optimum reception.
Notes on radio reception
Do not place the AM loop aerial near the unit, power supply or
other AV equipment during use, as noise may result.
Keep digital music players or mobile phones away from the AM
loop aerial or the FM aerial, as this may lead to reception
interference.
When you are listening to the radio with an iPhone connected
to the unit, interference with radio reception may occur.
When you are listening to the radio while charging an iPhone,
interference with radio reception may occur.
Setting the alarm
This unit is equipped with 3 alarm modes—iPhone, radio and
Battery
buzzer. Set the clock to the current time before setting the alarm,
compartment
so that the alarm will sound at the correct time. (See "Setting the
clock. " )
To set the alarm
1
Press and hold ALARM A or B.
"WAKE UP" appears and the hour flashes in the display.
2
Press ALARM TIME SET + or – repeatedly until
the desired hour appears.
To cycle the hour rapidly, press and hold ALARM TIME SET
AUDIO IN jack AM ANTENNA jack
+ or –.
3
Press ALARM A or B.
The minute flashes.
4
Repeat step 2 to set the minute.
5
Press ALARM A or B.
The days of the week flash.
6
Repeat step 2 to set the days of the week.
You can select the days from the following three options by
pressing ALARM TIME SET + or –:
Week day: MON TUE WED THU FRI
Weekend: SAT SUN
Every day: MON TUE WED THU FRI SAT SUN
7
Press ALARM A or B.
The alarm mode setting is entered.
8
Press ALARM TIME SET + or – repeatedly until
the desired alarm mode flashes.
You can choose one of 4 settings: "iPhone, " "FM, " "AM" or
"BUZZER. " Set the alarm mode as follows:
– iPhone: see " To set the alarm as iPhone. "
– FM or AM: see " To set the radio alarm. "
– BUZZER: see " To set the buzzer alarm. "
To set the alarm as iPhone
1
Perform steps 1 to 8 in "To set the alarm. "
2
Press ALARM A or B to select alarm mode for
"iPhone. "
The volume level flashes in the display.
3
Press ALARM TIME SET + or – to adjust the
volume.
4
Press ALARM A or B.
The setting is entered. "A" or "B" appears in the display
indicating that the alarm has been activated.
The iPhone will sound at the set time.
Notes
To wake up to music stored in an iPhone, connect the iPhone
to the unit before the alarm sounds.
Even if the alarm setting for iPhone is complete, if you turn the
iPhone power off after setting the iPhone on the unit, the
alarm will be the buzzer.
To set the radio alarm
1
Perform steps 1 to 8 in "To set the alarm. "
2
Press ALARM A or B to select radio band ("FM"
or "AM").
Preset number flashes in the display.
3
Press ALARM TIME SET + or – to select the
desired preset number or "- -" of the
corresponding band.
"– –" is the last station you listened to before the alarm
sounds.
4
Press ALARM A or B.
The volume level flashes in the display.
5
Press ALARM TIME SET + or – to adjust the
volume.
6
Press ALARM A or B.
The setting is entered. "A" or "B" appears in the display
indicating that the alarm has been activated.
The radio will turn on at the set time.
To set the buzzer alarm
1
Perform steps 1 to 8 in "To set the alarm. "
2
Press ALARM A or B to select "BUZZER" alarm
mode.
The setting is entered. "A" or "B" appears in the display
indicating that the alarm has been activated.
The buzzer will sound at the set time.
Note
The volume of the buzzer is not adjustable.
To confirm an alarm time setting
Press ALARM TIME SET + or –. The setting will be displayed for
about 4 seconds.
89.8 MHz to preset number 2 for FM.
To change an alarm setting
Other useful functions
Press and hold ALARM TIME SET + for at least 2 seconds to
move the alarm time forwards. Press and hold ALARM TIME SET
– for at least 2 seconds to move the alarm time back.
Setting the brightness of
When you release the button, the changed time will flash for
about 2 seconds. To change the alarm time again, press ALARM
the display
TIME SET + or – within these 2 seconds, otherwise the setting
change will be set as displayed.
Four levels of brightness are available by pressing SNOOZE/
Tips
BRIGHTNESS.
"A" or "B" appears in the display indicating that the alarm time
has been changed and activated.
Even if the alarm has been set to off, the alarm will be
Even if brightness level is set to Off, it will change to Low while
switched on when you change the alarm setting.
the alarm is sounding.
To doze for a few more minutes
Press and hold SNOOZE/BRIGHTNESS to turn off the display
directly.
Press SNOOZE/BRIGHTNESS.
The sound turns off but will automatically come on again after
About App
about 10 minutes.
You can change the snooze time by pressing SNOOZE/
BRIGHTNESS repeatedly within 4 seconds.
A dedicated Dock App for iPod touch/iPhone available at Apple
The maximum length of the snooze time is 60 minutes.
App Store.
Search for "D-Sappli" and download the free App to find out
more about the functions.
To stop the snooze timer, press OFF.
Features
D-Sappli includes various timer functions: Music Play Timer
To stop the alarm
and Sleep Timer.
Music Play Timer allows you to play/pause desired music at a
Press OFF to turn off the alarm.
desired time. Sleep Timer allows you to specify a time at which
Press , FM/AM, or AUDIO IN to stop the alarm and activate
to stop music playback.
the corresponding function at the same time.
Music Play Timer and Sleep Timer are available only when D-
The alarm will sound again at the same time the next day.
Sappli is activated.
D-Sappli can display a list of Radio Preset Stations
To deactivate the alarm
programmed in this unit.
You can rename the Radio Preset Stations, and change their
preset numbers on the D-Sappli. Preset numbers and order
Press ALARM A or B to turn off the alarm A or B indicator in the
will also be changed accordingly in the unit.
display.
D-Sappli also includes a clock display enlarge feature.
To activate the alarm
Notes
If the App to link with this unit is not downloaded to your iPod
Press ALARM A or B to turn on the alarm A or B indicator in the
touch/iPhone, a pop-up message prompting you to download
D-Sappli may appear repeatedly.
display.
Deactivate the App's link function to stop the pop-up
Notes
message.
To deactivate the App's link function: Remove your iPod
When alarm is set as iPhone, only the buzzer alarm will sound
touch/iPhone from the Dock connector. Press (to enter
if there is no iPhone on the Dock connector, music is not
the function for iPhone). Press and hold then OFF on the
stored in the iPhone, or the iPhone is turned off.
unit at the same time for at least 2 seconds. ("OFF" appears in
If the alarm time you set falls within the hour that will be
the display to show that the App's link function has been
skipped when summer time (daylight saving time) is
deactivated.)
activated, the alarm sounds immediately.
To re-activate the App's link function, repeat the above steps.
If the same alarm time is set for both alarm A and B, alarm A
("On" appears in the display to show that the App's link
takes priority.
function has been activated.)
If no operation is performed while the alarm is sounding, the
alarm will stop after about 60 minutes.
Notes on the alarm in the event of a power
General information
interruption
In the event of a power interruption, the buzzer alarm will last
about 5 minutes if the battery is not weak. However, certain
Replacing the battery of
functions will be affected as follows:
The backlight will not light up.
the unit
If the alarm mode is set to iPhone or radio, it will change to
buzzer automatically.
If OFF on the unit is not pressed, the alarm will sound for
1
Keep the AC adaptor connected to the wall
about 5 minutes.
outlet and unit, then remove the screw of the
If "" appears in the display, the alarm will not sound in the
event of a power interruption. Replace the battery if ""
battery compartment on the bottom of the
appears.
The snooze function cannot be set during a power
unit, then open the battery compartment lid.
interruption.
During a power interruption, each alarm will sound at the set
time only once.
Setting the sleep timer
You can fall asleep to music, etc. using the sleep timer. The unit
stops playback or radio automatically after a preset duration.
1
Press SLEEP while playing music or listening to
radio.
2
Remove the old battery and insert a new one
"SLEEP" appears and the sleep time flashes in the display.
in the battery compartment with the side
2
Press SLEEP to set the sleep timer duration.
Each time you press SLEEP, the duration (in minutes)
facing up.
changes as follows:
The display returns to the current time for about
4 seconds after you have finished the duration setting and
released SLEEP, then the sleep timer starts.
The unit plays for the duration you set, then stops.
Note
Any currently-playing optional component connected to the
AUDIO IN jack will continue playing back, although its sound
will be muted.
3
Replace the battery compartment lid and
To stop listening before the
tighten the screw.
preset time
4
Press , FM/AM, AUDIO IN or SNOOZE/
Press OFF.
BRIGHTNESS on the unit to turn "
display.
To change the sleep timer setting
Notes
You can press SLEEP repeatedly to select the desired sleep timer
When you replace the battery, do not disconnect the plug
setting, even after the sleep timer has been activated.
from the AC outlet. Otherwise, the current date, current time,
alarm and station presets will be erased.
To deactivate the sleep timer
If you are not going to use the remote for a long time, remove
the battery to avoid any damage that may be caused by
Press SLEEP repeatedly to set the sleep timer to "OFF" in step 2.
leakage or corrosion.
Note
When the alarm time is set during the sleep timer duration,
Troubleshooting
the sleep timer will be deactivated automatically when the
alarm sounds.
Should any problem persist after you have made the following
checks, consult your nearest Sony dealer.
Connecting optional
General
components
The power does not turn on when the AC
To listen to sound
adaptor is connected.
Make sure the AC adaptor is connected to the wall outlet
You can enjoy sound from an optional component, such as a
firmly.
portable digital music player, through the speaker of this unit. Be
There is no sound.
sure to turn off the power of all components before making any
connections.
Make sure that the unit is connected to the AC power, and the
1
optional component is turned on.
Firmly connect the line output jack of a
Adjust the volume using VOL + or –.
portable digital music player (or other
Make sure that the optional component is correctly connected
component) to the AUDIO IN jack on the rear
to the unit.
of the unit, using a suitable audio connecting
The sound is low.
cable (not supplied).
Adjust the volume using VOL + or –.
2
Press AUDIO IN to activate the Audio-in
The sound is distorted.
function.
Deactivate the equalizer function of the connected optional
"AUDIO IN" appears in the display.
component.
3
Turn the connected component on.
Lower the volume of the unit.
4
Play the connected component.
Sound skips or noise is heard.
Sound from the connected component is output from the
Make sure that the optional component is correctly connected
speaker of this unit.
to the unit.
5
Adjust the volume using VOL + or –.
Make sure that the optional component is not near a
To return to the radio
television.
When the optional component is not in use with the unit,
Press FM/AM.
disconnect the audio connecting cable from the AUDIO IN
The preset number followed by the frequency of the last station
jack.
appears in the display.
The radio function of a connected optional
To return to the iPhone
component does not work.
Press .
When an optional component equipped with radio or one
segment tuner is connected to the unit, its reception
To stop listening
sensitivity may be poor, resulting in no radio function.
Noise is heard.
Press OFF, and stop playback on the connected component.
Ensure that the unit is not near in-use portable phones, etc.
Notes
Disconnect the audio connecting cable from the AUDIO IN
The necessary type of audio connecting cable depends on the
jack when not in use.
optional component. Be sure to use the correct type of cable.
If the volume level is low, adjust the volume of the unit first. If
The clock flashes "0:00" or "AM 12:00" due to
the volume is still too low, adjust the volume of the connected
a power interruption.
component.
When you are watching TV or listening to the radio with an
The battery is low. Replace the battery. Remove the old
optional component connected to the unit, the reception may
battery and install a new one.
be poor.
Make sure to remove the insulation film of the backup battery
Disconnect the audio connecting cable from the unit when it
before use.
is not in use.
When you listen to the radio with an optional component
The alarm of radio, iPhone or buzzer does
connected, turn off the connected component to prevent
not sound at the preset alarm time.
noise. If noise occurs, even when the component is turned off,
disconnect and place the optional component away from the
Check that alarm "A" or alarm "B" is properly displayed.
unit.
The alarm of radio or iPhone is activated but
no sound comes on at the preset alarm time.
Check the alarm volume setting.
When using an iPhone
There is no sound.
Make sure the iPhone is connected firmly.
Make sure that the connected iPhone is playing music.
Make sure that the function for iPhone is activated.
Check that the iPhone is compatible with this unit. (See
"Compatible iPod/iPhone models. " )
Operation is not performed.
Make sure the iPhone is connected firmly.
Check that the iPhone is compatible with this unit. (See
"Compatible iPod/iPhone models. " )
The iPhone does not charge.
Make sure the iPhone is connected firmly.
Make sure the AC adaptor is connected firmly.
Check that the iPhone is compatible with this unit. (See
"Compatible iPod/iPhone models. " )
Audio-in
There is no sound.
Make sure the audio connecting cable is connected firmly.
Make sure that the connected optional component is in
playback mode.
Increase the volume of the optional component without
causing sound distortion. To adjust the volume of the optional
component, refer to its user guide.
Make sure that the Audio-in function is activated.
The sound is low.
Check the volume of the connected optional component.
Increase the volume of the optional component without
causing sound distortion. To adjust the volume of the optional
component, refer to its user guide.
The sound is distorted.
Lower the volume of the optional component till the
distortion is not heard. To adjust the volume of the optional
component, refer to its user guide.
Remote control
The remote does not function.
Replace the battery in the remote with a new one if it is weak.
Make sure that you are pointing the remote at the remote
sensor on the unit.
Do not cover or place any objects directly in front of the
remote sensor.
Remove any obstacles in the path between the remote and
the unit.
Make sure the remote sensor is not exposed to strong light,
such as direct sunlight or fluorescent lamp light.
If the problem persists, consult your nearest Sony dealer.
Specifications
Time display
Switching between 12-hour system (default) and 24-hour
system.
iPhone
DC out: 5 V
MAX: 1 A
Radio
Frequency range
Band
Frequency
FM
87.5 MHz - 108 MHz
AM
531 kHz - 1,602 kHz
General
Speaker
Approx. 40 mm dia.
Input
AUDIO IN jack (ø 3.5 mm stereo minijack)
Power output
Mono 0.8 W (at 10% harmonic distortion)
Power source
DC IN 6V (with supplied AC adaptor (AC 230 V, 50 Hz))
For clock back up: 3 V DC, CR2032 battery (1)
Dimensions
Approx. 126 mm × 92 mm × 100 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 482 g
Supplied accessories
Remote control (with a lithium battery) (1)
AC adaptor (1)
AM loop aerial (1)
Operating Instructions (this document) (1)
Compatible iPod/iPhone models
The compatible iPod/iPhone models are as follows.
Update the software of the iPod/iPhone to the latest version
before using it with this unit.
CR2032
iPhone 5s
iPhone 5c
iPhone 5
iPod touch (5th generation)
iPod nano (7th generation) *
* The remote command of "MENU," "," "," and "ENTER" will
only work with iPhone and iPod touch.
Design and specifications are subject to change without notice.
" off in the
Frequency step
0.05 MHz
9 kHz
Advertisement
