Acer X110 Service Manual
  1. Manuals
  2. Brands
  3. Acer Manuals
  4. Projector
  5. X110 Series
  6. Service manual

Acer X110 Service Manual

Acer projector service manual
Hide thumbs Also See for X110:
Table of Contents

Advertisement

Quick Links

See also: User Manual

SERVICE MANUAL

X1161/X1261/X1161A/X1161N/X110/H5360
Date
Revise Version
2009.05.22
2009.06.25
2009.08.06
2009.09.16
Copyright September, 2009
SI :
V1.0
Initial Issue
V2.0
Modify Chapter 5
1. Add X1161's extended models: X1161A, X1161N,X110
V3.0
2. Update Engineering Spec. of Chapter 1
3. Modify Chapter 4
1. Add X1261's extended models: H5360
V4.0
2. Update Engineering Spec. of Chapter 1
3. Modify Chapter 4
All Rights Reserved
TSE:
Description
P/N: 36.8CP01G001
Check:
Approved:

Advertisement

Table of Contents
loading

Related Manuals for Acer X110

Summary of Contents for Acer X110

  • Page 1: Service Manual

    SI : TSE: Description Initial Issue Modify Chapter 5 1. Add X1161’s extended models: X1161A, X1161N,X110 2. Update Engineering Spec. of Chapter 1 3. Modify Chapter 4 1. Add X1261’s extended models: H5360 2. Update Engineering Spec. of Chapter 1 3.
  • Page 2 Preface This manual is applied to X1161/X1261/X1161A/X1161N/X110/H5360 projection system. The manual gives you a brief description of basic technical information to help in service and maintain the product. Your customers will appreciate the quick response time when you immediately identify problems that occur with our products.
  • Page 3 X1161/X1161A/X1161N/X110/X1261/H5360 Comparison List Models H5360 Parts NAME LABEL 35.8ER02H001 MAIN BOARD 70.8ER17GR01 DMD CHIP 48.8ER01G001 IO COVER 70.8ER18GR01 ENGINE 70.8ER15GR01 SPEAKER 49.8CQ01G001 LAMP BLOWER SYSTEM FAN COLOR WHEEL 70.8ER16GR01 LAMP SP.8ER01GC01 LVPS 75.8FE01GP01 LAMP DRIVER 70.8ER20GR01 BOTTOM COVER 70.8ER19GR01 TOP COVER 75.8ER01G001...

  • Page 4: Table Of Contents

    Disassemble Blower Disassemble LVPS Module Disassemble Lamp Driver Module Disassemble Interrupt Switch Disassemble Bottom Shielding Disassemble Speaker (for X1261/H5360) Rod Adjustment Re-write System and Lamp Usage Hour Assemble Speaker (for X1261/H5360) X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-10 2-11 2-11 2-12 2-13 2-13 2-14 2-14...
  • Page 5 Troubleshooting LED Lighting Message Main Procedure Chapter 4 Function Test & Alignment Procedure Test Equipment Needed Service Mode OSD Reset Test Condition Test Inspection Procedure PC Mode X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-17 2-17 2-18 2-19 2-19 2-20 2-21 2-21 2-22 2-22 2-23...
  • Page 6 EDID Upgrade EDID Introduction Equipment Needed Setup Procedure (VGA) EDID Key-In Procedure Un-lock SNID and Default Language Reset Appendix A Exploded Overview Appendix B Serial Number System Definition PCBA Code Definition Appendix C RS232 function command summary table (for X1261/H5360) I X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 4-10 4-12...

  • Page 7: Chapter 1 Introduction

    ● Temperature control circuits with adaptive fan rotational speeds ● Maximum touch temperature follow UL60950-1 ● Engineering spec: • 2250 ANSI Lumens (Typical) • 2000 ANSI Lumens (Minimum) ● Marketing spec: • 2500 ANSI Lumens (Standard) • 2000 ANSI Lumens (ECO) X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Description...
  • Page 8 • 2900: 1 Full White with full power / full Black with eco power (Typical; projection lens at tele mode) ● Marketing spec: • 3500: 1 (for X1161/X1161N/X1161A/X110) • 3000: 1 (for X1261) • 3200: 1 (for H5360) • 3200: 1 (for H5360) ●...
  • Page 9 ● TI DMD 0.55” 12° 2xLVDS S450 XGA Digital Mirror Device (for X1261) ● TI DMD 0.62” 12° S450 720p Digital Mirror Device (for H5360) ● 800(H) x 600(V) (for X1161/X1161N/X1161A/X110)) ● 1024(H) x 768(V) (for X1261) ● 1280(H) x 720(V) (for H5360) ● 6 segments (R81Y41G84C31W52B71) (for X1161/X1261/ X1161N/X1161A/X110) ●...
  • Page 10 Item Terminal ● For X1161/1161A/X110: • VGA In * 1: One D-Sub 15-Pin Female Connector for PC input and analog Data ( Component i/p, HDTV, RGB Sync) • S-video * 1: One Mini DIN 4-Pin connector for S-Video Input Connector •...

  • Page 11: Compatible Mode

    Item Input signal spec. Temperature Maximum Humidity 1-2 Compatible Mode Compatibility modes (VGA Analog) (for X1161/X1261/X1161N/X1161A/X110) Compatibility (1) VGA Analog - PC Signal SVGA ● Hsync Frequency 30~ 100 kHz ● Vsync Frequency 50~ 85 Hz ● Video Signal RGB (PC) •...
  • Page 12 1152 x 870 1280 x 960 1024 x 768 1280 x 768 1280 x 768 1280 x 768 1280 x 720 1280 x 800 1440 x 900 1680 x 1050 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential H.Frequency [KHz] 48.4 56.5 60.0 68.7 63.8 67.5 77.1 64.0 77.0...
  • Page 13 1280 x 960 1400 x 1050 1600 x 1200 640 x 480 640 x 480 800 x 600 1024 x 768 1152 x 870 1280 x 960 1024 x 768 X1161/X1261/X1161A/X1161N/X110/H5360 H.Frequency [KHz] 31.5 37.9 37.5 43.3 61.6 35.2 37.9 48.1 46.9...
  • Page 14 Resolution V.Frequency [Hz] 1280 x 768 1280 x 768 1280 x 768 1280 x 720 1280 x 800 1366 x 768 1440 x 900 1440 x 900 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential H.Frequency [KHz] 47.8 60.3 68.6 44.8 49.6 47.71 55.9 65.3 30k-100kHz...

  • Page 15: Product Overview

    1-3 Product Overview Projector Outlook Front /Upper side Item Description Ventilation (inlet) Ventilation (outlet) Remote control receivers Focus ring Zoom lens Item Lens cap Power button Remote control Zoom lever Horn X1161/X1261/X1161A/X1161N/X110/H5360 Description Confidential...
  • Page 16 Item Description Power socket KensingtonTM lock port PC analog signal/HDTV/component video input connector (VGA IN 1 or VGA IN) Below items are for X1161/X1161A/X110 only: S-Video input connector Composite video input connector USB connector RS232 connector Below item is for X1161N: USB connector Note: “*”...
  • Page 17 Description Power socket KensingtonTM lock port RS232 connector PC analog signal/HDTV/component video input connector (VGA IN 1 or VGA IN) HDMI connector Item YPbPr input connector S-Video input connector Composite video input connector Audio input connector X1161/X1261/X1161A/X1161N/X110/H5360 Description Confidential 1-11...
  • Page 18 Remote Control and Control Panel Layout X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 1-12...
  • Page 19 Zooms the projector display in or out. Changes the active source. Momentarily turns off the video. Press “HIDE” to hide the image, press again to display the image. Unique Acer functions: eView, eTimer, ePower Management. X1161/X1261/X1161A/X1161N/X110/H5360 Description Confidential...

  • Page 20: Getting Started

    RS232 cable Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Item S-Video cable Audio cable jack/jack Audio cable jack/RCA USB cable X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Description 1-14...
  • Page 21 System Block Diagram (for X1161/X1161A/X110) X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 1-15...
  • Page 22 System Block Diagram (for X1261) X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 1-16...
  • Page 23 System Block Diagram (for H5360) X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 1-17...
  • Page 24 Bottom Cover Dimension X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 1-18...

  • Page 25: Equipment Needed & Product Overview

    * Note: - If you need to replace the Main Board, you have to get into Service Mode and record the lamp usage hour, please refer to section 2-21. - As the process of X1161/ X1161A/X1161N/X110/H5360 disassembling is the same as X1261, we take X1261 for example here.

  • Page 26: Disassemble Lamp Cover Module

    1. Loosen 2 screws (as red circle) on the Lamp Cover. 2. Disassemble the Lamp Cover Module. 2-3 Disassemble Lamp Module 1. Loosen 2 screws (as red circle) on the Lamp Module. 2. Take off the Lamp Module. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...

  • Page 27: Disassemble Top Cover Module

    2. Remove the Top Cover Module. Note: - When you remove the Top Cover, take care the 6 tenons (as green square). 2-5 Disassemble Top Shielding 1. Unscrew 5 screws (as red circle) to disassemble the Top Shielding. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...

  • Page 28: Disassemble Front Cover And Ir Sensor Board

    2 tenons (as green square). 3. Remove the Front Cover. 4. Tear off the mylar (as blue square). 5. Unscrew 2 screws (as red circle). 6. Remove the IR Sensor Board and IR Cap. IR Sensor Board X1161/X1261/X1161A/X1161N/X110/H5360 Confidential IR Cap...

  • Page 29: Disassemble Main Board Module And Io Cover Module

    Please refer to the table as below for details of each connector. Male Connector Item on Main Board Lamp Driver System Fan Blower The key feature Black wire tube (5 pin) Compose of Red/Yellow/Black Wire (3 pin) Compose of Red/Black/White Wire (3 pin) X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Figure...
  • Page 30 6. Unscrew 2 screws (as green circle). The key feature Compose of Red/Black/White Wire and Black wire tube (3 pin) Compose of Red/Black/Whit Wire and Black wire tube (3 pin) Compose of Red/Black Wire and Black wire tube (2 pin) X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Figure...

  • Page 31: Disassemble Engine Module

    Please detach the Circuit boards and follow local regulations for disposal. 2-8 Disassemble Engine Module 1. Tear off EMI Gasket (as green square). 2. Unscrew 4 screws (as yellow circle) to disassemble the Engine Module. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential IO Cover...

  • Page 32: Disassemble Color Wheel Module

    - Pay attention to the fixed position when assembling the DMD Chip. NOTE: Circuit boards > 10 cm² has been highlighted with the yellow rectangle as above image shows. Please detach the Circuit boards and follow local regulations for disposal. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...

  • Page 33: Disassemble Zoom Ring

    1. Unscrew 2 screws (as red circle) to disassemble the Zoom Ring and Zoom Ring Fixed Holder. 2-12 Disassemble Focus Ring 1. Unscrew 3 screws (as red circle) to disassemble the Focus Ring. Zoom Ring Focus Ring X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Zoom Ring Fixed Holder...

  • Page 34: Disassemble System Fan Module

    3. Disassemble the System Fan Module. 4. Unscrew 4 screws (as blue circle) to separate System Fan and Fan Shielding. Note: - Take the Fan Module as the right gesture. System Fan the right gesture X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Fan Shielding the wrong gesture 2-10...

  • Page 35: Disassemble Blower

    4. Unplug 1 connector (as green square). NOTE: Circuit boards > 10 cm² has been highlighted with the yellow rectangle as above image shows. Please detach the Circuit boards and follow local regulations for disposal. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential AC Inlet Bracket 2-11...

  • Page 36: Disassemble Lamp Driver Module

    Lamp Driver Holder. NOTE: Circuit boards > 10 cm² has been highlighted with the yellow rectangle as above image shows. Please detach the Circuit boards and follow local regulations for disposal. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Lamp Driver to Lamp Cable Lamp Driver Holder 2-12...

  • Page 37: Disassemble Interrupt Switch

    1. Unfasten 2 tenons (as green square) to disassemble the Interrupt Switch. 2-18 Disassemble Bottom Shielding 1. Tear off the EMI tapes (as yellow square). 1. Unscrew 2 screws (as red cricle) to disassemble the Bottom Shielding. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Interrupt Switch 2-13...

  • Page 38: Disassemble Speaker (For X1261/H5360)

    - Change the screen to "white screen". - Adjust the screws by using the rod on the engine module to readjust the image. ("Screw 1" should be adjusted first, and then "screw 2". Adjust until the yellowish or bluish parts disappeared.) X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-1...

  • Page 39: Re-Write System And Lamp Usage Hour

    2. Get into Other Settings Mode - Use "Up" or "Down" buttons to select "Other Settings", then press "Menu" button. 3. Re-write System Hours - Select "System Hours Adjust" and use "Left" or "Right" buttons to re-write the "System Hours (full)". X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-15...

  • Page 40: Assemble Speaker (For X1261/H5360)

    "Exit", press "Menu" button to exit the Service Mode. Note: left key = decrease System/Lamp hour right key =increase System/Lamp hour 2-22 Assemble Speaker (for X1261/H5360) 1. Fasten 2 tenons (as green square) as blue arrows point to assemble the Speaker. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-16...

  • Page 41: Assemble Bottom Shielding

    Shielding 1. Screw 2 screws (as red circle) to assemble the Bottom Shielding. 2. Stick the EMI tapes (as yellow square). 2-24 Assemble Interrupt Switch 1. Fasten 2 tenons (as green square) to assemble the Interrupt Switch. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-17...

  • Page 42: Assemble Lamp Driver Module

    Lamp Driver Holder. 2. Plug 3 connectors (as green square) to assemble the cables on Lamp Driver Module. 3. Screw 2 screws (as blue circle). 4. Screw 1 screw (as red circle) to assemble the Lamp Driver Module. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-1...

  • Page 43: Assemble Lvps Module

    2. Assemble the LVPS Module and the AC Inlet Bracket. 3. Screw 6 screws (as red circle). 4. Plug 2 connectors (as yellow square). 2-27 Assemble Blower 1. Assemble the Blower. 2. Screw 3 screws (as red circle). X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-1...

  • Page 44: Assemble System Fan Module

    1. Screw 4 screws (as blue circle) to assemble System Fan and Fan Shielding. 2. Assemble the System Fan Module. 3. Stick the EMI tape (as green square). 4. Screw 3 screws (as red circle) to assemble the Fan Module. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-20...

  • Page 45: Assemble Focus Ring

    2-29 Assemble Focus Ring 1. Screw 3 screws (as red circle) to assemble the Focus Ring. 2-30 Assemble Zoom Ring 1. Screw 2 screws (as red circle) to assemble the Zoom Ring and Zoom Ring Fixed Holder. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-21...

  • Page 46: Assemble Dmd Chip And Dmd Board

    2-32 Assemble Color Wheel Module 1. Screw 1 screw (as blue circle) to assemble the Photo Sensor Board on the Color Wheel Module. 2. Screw 2 screws (as red circle) to assemble the Color Wheel Module on Engine Module. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-22...

  • Page 47: Assemble Engine Module

    Engine Module. 2. Stick the EMI Gasket (as green square). 2-34 Assemble IO Cover and Main Board Module 1. Assemble the IO Cover and Main Board Module. 2. Screw 4 hex screws (as blue circle). X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-23...
  • Page 48 4. Assemble the Main Board Module. 5. Plug 1 connector (as blue square). 6. Screw 2 screws (as red circle). 7. Plug 6 connectors (as yellow square). 8. Stick 3M tape (as green square) on the Main Boad Module. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-2...

  • Page 49: Assemble Ir Sensor Board And Front Cover

    2. Screw 2 screws (as red circle). 3. Stick the mylar (as blue square). 4. Assemble the Front Cover. 5. Press two sides (as red arrows point) to fasten 2 tenons (as green circle). 6. Plug 1 connector (as yellow square). X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-25...

  • Page 50: Assemble Top Shielding

    2-37 Assemble Top Cover Moudle 1. Assemble the Top Cover Module. Note: Take care the 6 tenons (as green square) when you assemble the Top Cover. 2. Screw 2 screws (as red circle) on the Bottom Cover. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-26...

  • Page 51: Assemble Lamp Module

    1. Assemble the Lamp Module. 2. Tighten 2 screws (as red circle) on the Lamp Module. 2-39 Assemble Lamp Cover Module 1. Assemble the Lamp Cover Module. 2. Tighten 2 screws (as red circle) on the Lamp Cover. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 2-27...

  • Page 52: Chapter 3 Troubleshooting

    0.5 second H(On), 0.5 second L(Off) flashing blue twice, and red LED ON 2 second, and by returns 0.5 second H(On), 0.5 second L(Off) flashing blue twice, and red LED ON 2 second, and by returns X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Power LED Blue 0.5 second H(On),...

  • Page 53: Main Procedure

    - Check Lamp Cover, Interrupt Switch - Check Lamp Module - Check Lamp Driver - Check LVPS - Check Main Board - Check Color Wheel - Check Photo Sensor Board X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Procedure : Quick Flashing blue twice and...
  • Page 54 - Check Photo Sensor and clean Photo Sensor - Check DMD Board - Check Main Board " " - Do Reset (All data) of the OSD Menu - Adjust Color Wheel Index - Check Main Board - Check DMD Board - Check Color Wheel X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Procedure...
  • Page 55 OSD Menu - Check Main Board - Ensure that the signal cables and source are work as well - Ensure that your Projector is not in “Mute” mode - Check Main Board - Check Speaker X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Procedure...
  • Page 56 Un-lock SNID and Default Language Reset to 6-5 of Chapter 6) c. Press "Power", "Left", "Left" and "Menu" buttons sequentially on remote controller to get into Service Mode to obtain the SNID number, then calculate the Universal Password. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Procedure " " (refer...

  • Page 57: Chapter 4 Function Test & Alignment Procedure

    1. After final QC step, we have to erase all saved change again and restore the OSD default setting. The following actions will allow you to erase all end-users' settings and restore the default setting: (1) Please get into OSD menu. (2) To execute "Reset" function. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...

  • Page 58: Test Condition

    < Figure: Zone A, Zone B, Zone C & Frame (as green line) Definition, Active area=Zone A + Zone B > Run-in Time 2 hours 4 hours 6 hours Press right key to adjust the time (50) Press right key to adjust the time (10) Press right key to adjust the cycle Frame X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...

  • Page 59: Test Inspection Procedure

    Blue 60 pattern Gray 10 pattern White & Black pattern White & Black pattern Main Color Firmware Board Wheel X1161/X1261/X1161A/X1161N/X110/H5360 Pattern A+B≤ 1 A+B ≤ 6 A+B ≤ 10 A+B ≤ 10 ≤ 1 A+B ≤ 1 A+B = 0...

  • Page 60: Pc Mode

    “frequency” function or “tracking” function to adjust the screen. - The PC mode functionally sure be workable include support format with frequency and auto detected functional will be workable. 2. Bright Pixel Procedure - Test equipment: video generator X1161/X1261/X1161A/X1161N/X110/H5360 General-1 Master Confidential...
  • Page 61 - Test signal: 1024 x 768 @60Hz - Test Pattern: Blue 60 Inspection item - Dark blemish check Criteria - The dark blemish should be no more than 10 under blue 60 pattern. X1161/X1261/X1161A/X1161N/X110/H5360 Gray 10 Full white Gray 15 Blue 60 Confidential...
  • Page 62 - Gray level should not have abnormal color or heavy lines. - If color appears abnormal, please get into service mode to do Color Wheel Index adjustment. - The PC mode functionally sure be workable X1161/X1261/X1161A/X1161N/X110/H5360 Full screen Master 64 gray RGBW SMPTEbar...

  • Page 63: Calibration

    (2) Test Pattern: SMPTEbar - Note mode. buttons sequentially to get into Service Mode. to access "PC Calibration" for correction in Service Mode. Choose "Exit" to leave the Service Mode. X1161/X1261/X1161A/X1161N/X110/H5360 White/Black InFocus II / 64 gray RGBW SMPTEbar Confidential...
  • Page 64 Service Mode. - Choose and access "G Sensor Calibration" for correction. mode. to access "Video Calibration for" correction in Service Mode. Choose “Exit” to leave the Service Mode. X1161/X1261/X1161A/X1161N/X110/H5360 InFocus II / 64 gray RGBW Confidential...

  • Page 65: Video Performance

    Inspection Distance - 1.8 M ~2.5 M Criteria - Check any abnormal color, line distortion or any noise on the screen. 2. S-Video (for X1161/X1161A/X110/X1261/H5360) Procedure - Test equipment: DVD player - Test signal: S-Video Inspection item - Video performance test Inspection Distance - 1.8 M ~2.5 M...

  • Page 66: Optical Performance Measure

    - Connect VGA IN port of Projector with VGA port of Chroma by VGA cable, press "Menu" button, get into OSD mode, the settings are as below: - "Display mode" is "Bright", "Brightness" is "50", "Contrast" is "70", and the "Format" is "4:3". X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 4-10...
  • Page 67 - Follow Contrast formula to calculate contrast values. ☼ Contrast Formula P5/B5 Note: P5 = Lux of center in full white pattern Criteria ● 2500: 1 (for X1161/X1161A/X1161N/X110) ● 2100: 1 (for X1261) ● 2300: 1 (for H5360) 4. Uniformity� Procedure...

  • Page 68: Others

    Plastic Parts All plastic parts can not be broken and damaged. Safety or warning All safety and warning labels should be visible, label including all contents. All interface connectors should be complete and Connector workable. Check point X1161/X1261/X1161A/X1161N/X110/H5360 Confidential 4-12...

  • Page 69: Chapter 5 Firmware Upgrade

    - Power cord: 42.50115G001 - RS232 cable: 42.83618G001 (for X1261/H5360) - USB Cable: 42.87304G001 (for X1161/X1161A/X1161N/X110) - PC or Laptop Note: - The FW Upgrade procedure for X1161A/X1161N/X110/H5360 is the same as X1161, we take X1161 for example here. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...

  • Page 70: Dlp Composer Lite Setup Procedure

    1. Choose "DLP Composer Lite V9.2 Setup" Program. 2. Click "Next". 3. Read "License Agreement". - Choose "I accept and agree to be bound by all the terms and conditions of this License Agreement". - Click "Next". 4. Click "Next". X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...
  • Page 71 5. Click "Next". 6. Click "Next". 7. The program is executing "installing" status. 8. Click "Finish". X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...
  • Page 72 (3) Click "Next". (4) Searching picture, please wait for several seconds. (5) Click "Finish", then the USB driver has been installed successfully. Note: - If you have installed the USB driver, there is no need to perform this action. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...

  • Page 73: Firmware Upgrade Procedure

    - Connect projector with PC by RS232 cable. (for X1261/H5360) Note: - Please connect projector with PC by USB cable. (for X1161/X1161A/X1161N/X110) - The system fan and the lamp will not operate. 2. Execute the "DLP Composer 3. Click "Edit" and "Perferences".
  • Page 74 "Serial Port Configuration" picture will appear on the screen. - Confirm the settings are as the picture A. - Click "OK". 7. Click "OK". 8. Choose "Flash Loader". - Click "Browse" to search the firmware file (*.img). - Click "Open". X1161/X1261/X1161A/X1161N/X110/H5360 Confidential for X1261/H5360...
  • Page 75 - Unplug RS232 cable and power cord. (for X1261/H5360) Note: Please unplug USB cable and power cord. (for X1161/X1161A/X1161N/X110) 12. Check FW version. - Re-plug in power cable, then restart the unit and get into the Service Mode to check the firmware version.

  • Page 76: Waveform Download

    - Hold on "power" button and plug in the power cord. - After 2 seconds, the power LED will flash blue, then loosen "power" button. - After 5 seconds, the projector will automatically get into standby status. - Waveform Download is completed. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...

  • Page 77: Edid Upgrade

    PC graphics adapter. The system uses this information for configuration purposes, so the monitor and system can work together. Note: - The EDID Upgrade procedure for H5360/X1161/X1161A/X1161N/X110 is the same as X1261, we take X1261 for example here. - As for H5360, it needs to upgrade EDID for HDMI port.

  • Page 78: Equipment Needed

    - HDMI(M) to DVI(F) Adapter (42.82B13G001) (for H5360) - DVI Cable (42.83N06G001) (for H5360) - RS-232 9 Pin Cable (pin to pin, F-M) (42.83C07G001) - Generic Fixture (80.00001.001) for EDID Key-in (Fixture: JP3 must be closed) - Power Adapter (47.57803G001) - Monitor - PC X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...

  • Page 79: Setup Procedure (Vga)

    (2) Connect P3 of fixture with VGA Port of projector by VGA Cable. (3) Plug Power Adapter to JP1 of fixture. (4) Plug Power Cord to projector. Note: You must confirm that the JP3 is closed. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential VGA Cable Adapter RS232 Cable Power Port...

  • Page 80: Edid Key-In Procedure

    (1) Select the COM Port which you are using. (2) Click "Model". (3) Select the source file (*.ini). (4) Click "Open". (5) Key in the Serial Number into the Barcode blank space. (6) In "Write Source Select" item, select "Analog". (7) Click "Program". X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...
  • Page 81 4. When the EDID program is completed, a message "OK" will appear on the screen. 5. Read EDID "Analog" information - In "Read item", select "Analog" and "Trans", then click the "Read" button. 6. EDID informations will show the result. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...

  • Page 82: Un-Lock Snid And Default Language Reset

    Note: If it is fail, please do the actions as above steps item (1)-(2) S/N General rule: Use the last 1 digit code (as red word) for language information Language Code (F) Default Language Result Fail English Thailand Japan Russian Germany Hungarian X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...
  • Page 83 Appendix A (Exploded Image) Note: This chapter is only designed to show the exploded image of the projector. For updated part numbers, please refer to RSPL report. D.C. X1161 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...
  • Page 84 SPONGE LIGHTCUT ZOOM X1161 SPONGE POWER BUTTON X1161 EMI GASKET W13*H3*L40 EMI GASKET / 6*6*55 EMI GASKET H30*L30*W10 EMI TAPE W*20/L*70 EMI TAPE L25*W16 STAND OFF M3*4L D8.0 2100MP SPONGE LIGHTCUT FR-CW X1161 NAME LABEL X1161 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Parts Supply...
  • Page 85 D.C. X1261 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...
  • Page 86 SPONGE LIGHTCUT ZOOM X1161 SPONGE POWER BUTTON X1161 EMI GASKET W13*H3*L40 EMI GASKET / 6*6*55 EMI GASKET H30*L30*W10 EMI TAPE W*20/L*70 EMI TAPE L25*W16 STAND OFF M3*4L D8.0 2100MP SPONGE LIGHTCUT FR-CW X1161 NAME LABEL X1261 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Parts Supply...
  • Page 87 I.D. X1161 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...
  • Page 88 AC NLET BRACKET FOR X1160E LVPS 180W X1161 STB<1W CT-258A SCREW PAN MECH M3*6 NI MYLAR K-LOCK 0.25t X1160 W.A 8P 120mm MB TO LVPS X1160 EMI TAPE W*20/L*70 EMI GASKET L44*H1*W21 SCREW PAN MECH M4*5 COLOR W/TOOTH WASHER Cr3+ X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Parts Supply...
  • Page 89 Item 51.88T24G001 80.8CP05G001 51.8CP09H001 85.3A122G040 61.8CP14H001 52.8CP09G001 Description FRONT R CAP FOR X1160E PCBA IR SENSOR BD FOR X1161 FRONT COVER MN3600H X1161 SCREW CAP MECH M2*4 Ni ACER LOGO FOR X1161 SPONGE LIGHTCUT FR-CW X1161 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Parts Supply...
  • Page 90 IO MODULE X1161 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential V...
  • Page 91 SCREW HEX I/O #4-40 H4*L8 NI NYLOK SCREW PAN MECH M3*6 NI EMI GASKET W4*H1*L120 EMI TAPE L110*W20 ASSY IO COVER MODULE X1161 (SERVICE) SPONGE LIGHTCUT MAINSHIELDING X1161 MAIN SHIELDING SMALL BRKT TINPLATE X1161 EMI GASKET USB CONNECTOR EP719 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Parts Supply...
  • Page 92 IO MODULE X1261 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...
  • Page 93 ASSY IO COVER MODULE X1261 (SERVICE) O COVER MN3600H X1261 SPONGE LIGHTCUT IO X1261 SCREW HEX I/O #4-40 H4*L8 NI NYLOK SCREW PAN MECH M3*6 NI EMI GASKET L180*W4*H1 EMI TAPE L*190/W*13 SPONGE LIGHTCUT MAINSHIELDING X1161 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Parts Supply...
  • Page 94 Bottom Shielding Module Item 61.8CP06G001 61.8CP08G001 49.8CQ01G001 52.8CP05G001 Description BOTTOM SHIELDING SECC X1161 SPEAKER BRKT SUS301 X1161 SPEAKER 2W 16OHM DAB128 90mm X1261 SPONGE SPEAKER X1161 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Parts Supply...
  • Page 95 One- Fan Module X1161/X1261/X1161A/X1161N/X110/H5360 Confidential X...
  • Page 96 EMI TAPE W*20/L*70 FAN SHELDING FRONT AIR TIGHT CVS X1160 FAN SHELDING AIR TIGHT F12 X1160 BLOWER AIR TIGHT F12 H5350 TAPE 3M J350 17*60mm SUNON 45*20mm GB1245PKV1-8AY, F TYPE BLOWER FAN BLOWER 4520 RUBBER EP7190 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Parts Supply...
  • Page 97 ASSY OPTICAL ENGINE MODULE Z15 (S450) (for X1161) ASSY OPTICAL ENGINE MODULE (for X1261) FOCUS RING MN3600H X1161 ZOOM RING MN3600H X1161 ZOOM RING FIXED HOLDER EX330 SCREW PAN HEAD MECH M2.6*6 BLACK SCREW PAN TAP M1.7*4 BLACK EMI TAPE L45*W30 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Parts Supply...
  • Page 98 Assy Engine Module X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...
  • Page 99 S450 0.55” XGA/SVGA DMD thermal pad, FUJIPO- LY, Sarcon XR-HE, 18.4x12.5x0.5 mm ASSY ENGINE BASE Z15 DMD HEATSINK X1161 ASSY COLOR WHEEL MODULE Z15 CONDENSER LIGHT STOP EX615 CONDENSER 2 FOR A15W ROD COVER NEW SUS301 X15 ROD SPRING SUS301,X15 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Parts Supply XV...
  • Page 100 PCBA PHOTO SENSOR BOARD FOR X1161 YO 6S R81Y41G84C31W52B71_HE3 CW SCREW PAN MECH M2.6*4 Ni TAPE 3M J350 10*5mm FOR COLOR WHEEL DP715 ASSY COLOR WHEEL MODULE X1161 (SERVICE) COLOR WHEEL DISC RUBBER, EzPro755 COLOR WHEEL SHOULDER SCREW,EzPro755 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Parts Supply XV...
  • Page 101 ER FOR X1260K CABLE W.A. 2P #22 100mm LAMP DRIVER TO LAMP X1160 LAMP DRVER HOLDER AR TGHT F12 X1160 LAMP DRIVER HOLDER AIR TIGHT-FR F12 X1160 KAPTON 10*10 0.05t X1160 LAMP SPONGE F12 35X5X3.2mm EP709 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential Parts Supply...
  • Page 102 A.K. X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...
  • Page 103 SERVICE STATION CARD PE BAG ZIPPER #9 W/RECYCLING MARK FOR OPTOMA QUICK START CARD MULTILINGUAL AK LABEL 3”*3” BLANK USER’S GUIDE MULTILINGUAL (CD) ACER X1161/ X1261 NFRARED REMOTE CONTROLLER X1161 X3 “BONTECH” SECURITY CARD FOR ACER AR BAG RM X1161...

  • Page 104: Serial Number System Definition

    59 = Manufacturing Code 0 = Version Code 1 = Auto-Language Code EX: EYK0201001915000005901 This label represents the serial number for X1261. It is produced at CPC on fifteenth week of 2009. Its serial code is 00000. 00000 X1161/X1261/X1161A/X1161N/X110/H5360 Confidential...

  • Page 105: Pcba Code Definition

    II. PCBA Code Definition PCBA Code for Projector Vendor Code Firmware Version MB version Date Code XXXXXXXXX X1161/X1261/X1161A/X1161N/X110/H5360 Confidential EEEE...
  • Page 106 Source PbPr for D-sub Source S-Video Source Composite Video Aspect ratio 16:9 Aspect ratio 4:3 Volume + Volume – Brightness Contrast Color Temperature Hide Source Video: Color saturation adjustment Video: Hue adjustment Video: Sharpness adjustment Query Model name X1161/X1261/X1161A/X1161N/X110/H5360 Function feature Confidential...
  • Page 107 * 0 IR 047\r * 0 IR 048\r * 0 IR 049\r Note: The command with end "\r" means "Enter". Query Native display resolution Query company name Keystone Up Keystone Down Zoom e-Key Color RGB Language X1161/X1261/X1161A/X1161N/X110 Function feature Confidential...

This manual is also suitable for:

H5360X1161X1261Ep720X1161aX1161n

Table of Contents