Download  Print this page

Other Features; Executing Initial Setup - Samsung PA43H4000 User Manual

4 series.
Hide thumbs


❑ Adjusting Sound Settings
❑ Setting the Time
Sound Effect
(standard sound mode only)
The current time will appear every time you press the
■ DTS TruSurround: This function provides a virtual 5.1 channel
■ Clock Set: Set the Date and Time.
surround sound experience through a pair of speakers using HRTF
You can set the Date and Time directly by pressing the number
(Head Related Transfer Function) technology.
buttons on the remote control.
■ DTS TruDialog: This function allows you to increase the intensity of
■ Sleep Timer t: Automatically shuts off the TV after a preset
a voice over background music or sound effects so that dialogue can
period of time. (30, 60, 90, 120, 150 and 180 minutes)
be heard more clearly.
Use the ▲/▼ buttons to select a period of time, and then press
■ Equaliser: Use Equaliser to customize sound setting for each
ENTERE. To cancel the Sleep Timer, select Off.
■ On Timer: You can set up three separate On Timer configurations.
− Balance: Adjusts the balance between the right and left speaker.
(On Timer 1, On Timer 2, On Timer 3)
− 100Hz / 300Hz / 1kHz / 3kHz / 10kHz: (Bandwidth Adjustment)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Adjusts the level of specific bandwidth frequencies.
Manual to set at your convenience. If you select Manual, you can set
− Reset: Resets the equaliser to its default settings.
up the day you want to activate the timer.
The c mark indicates the day you've selected.
Speaker Settings
Time: Set the hour and minute.
■ Speaker Select t: A sound echo may occur due to a
Volume: Set the desired volume level.
difference in decoding speed between the main speaker and the
Source: To select the source of the content that will play when the TV
audio receiver. In this case, set the TV to External Speaker.
turns on. You can:
When Speaker Select is set to External Speaker, the volume
Select TV and have the TV display a specific air or cable channel.
buttons will not operate and the sound settings will be
Select USB and have the TV play back photo or audio files from a
USB device.
When Speaker Select is set to External Speaker.
Select a source on your TV that you have connected a set-top box
TV Speaker: Off, External Speaker: On
to, and have the TV display a channel from the set-top box.
When Speaker Select is set to TV Speaker.
The USB device must be connected to your TV before you can
TV Speaker: On, External Speaker: On
select USB.
If there is no video signal, both speakers will be mute.
If you select a source other than TV or USB, you must:
■ Auto Volume: To equalize the volume level on each channel, set to
Have a cable or satellite set-top box attached to that source.
Set the set-top box to the channel you want to watch when the
Night: This mode provides an improved sound experience compared
TV goes on.
to Normal mode, making almost no noise. It is useful at night.
Leave the set-top box turned on.
To use the volume control on the source device connected to the
When you select a source other than TV Channel options will
TV, set Auto Volume to Off on the TV. Otherwise, a change to the
volume control of the source device may not be applied.
Channel: (when the Source is set to TV) Select the desired channel.
Reset Sound
Music / Photo: (when the Source is set to USB) Select a folder in the
USB device containing music or photo files to be played when the TV
Reset all sound settings to the factory defaults.
is turned on automatically.
If there is no music file on the USB device or the folder containing
❑ Selecting the Sound Mode
a music file is not selected, the timer function does not operate
When you set to Dual I-II, the current sound mode is displayed on the
When there is only one photo file in the USB device, the slide show
will not play.
Audio Type
Dual I-II
If a folder name is too long, the folder cannot be selected.
Each USB you use is assigned its own folder. When using more
Automatic change
than one of the same type of USB, make sure the folders assigned
A2 Stereo
Stereo ↔ Mono
to each USB have different names.
Dual I ↔ Dual II
Dual I
It is recommended that you use a USB memory stick and a multi
Automatic change
card reader when using On Timer.
Stereo ↔ Mono
NICAM Stereo
The On Timer function may not work with USB devices with a built-
Mono → Dual I
in battery, MP3 players, or PMPs made by some manufacturers
Dual I
 Dual II 
because these devices take a long time to be recognised.
■ Off Timer: You can set up three separate Off Timer configurations.
If the stereo signal is weak and an automatic switching, occurs, then
(Off Timer 1, Off Timer 2, Off Timer 3)
switch to the mono.
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Only activated in stereo sound signal.
Manual to set at your convenience. If you select Manual, you can set
Only available when the Source is set to TV.
up the day you want to activate the timer.
The c mark indicates the day you've selected.
System Menu
Time: Set the hour and minute.

❑ Executing initial setup

Configure the channels and the time when setting up the TV for the first
time or when resetting the unit.
Execute the initial setup following instructions that the TV guides.
Enter your 4-digit PIN, the default of which is 0-0-0-0.
- 9 -
Use Mode
Securing the Installation Space
Select the Use Mode suitable for your place. We strongly recommend
Keep the required distances between the product and other objects (e.g.
you select Home Use.
walls) to ensure proper ventilation.
■ Home Use: Home Use is the default setting.
Failing to do so may result in fire or a problem with the product due to an
increase in the internal temperature of the product.
■ Store Demo: Store Demo is for retail environments only. If you select
Store Demo, some functions will not work, and the picture settings
When using a stand or wall-mount, use parts provided by Samsung
Electronics only.
will be reset every 30 minutes.
If you use parts provided by another manufacturer, it may result in a problem
Contact Samsung
with the product or an injury due to the product falling.
The appearance may differ depending on the product.
View this information when your TV does not work properly or when you
Be careful when you contact the TV because some parts can be somewhat
want to upgrade the software. You can find information regarding our call
centres, and how to download products and software.
Installation with a stand.
Installation with a wall-mount.
10 cm
Other Information
10 cm
10 cm
10 cm
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV on
the wall. For detailed information on installing the wall mount, see the
instructions provided with the wall mount. Contact a technician for
Securing the TV to the Wall
assistance when installing the wall mount bracket. We do not advice you
to do it yourself.
Caution: Pulling, pushing, or climbing onto the TV may cause the
Samsung Electronics is not responsible for any damage to the product
TV to fall. In particular, ensure that your children do not hang over or
or injury to yourself or others if you select to install the TV on your own.
destabilize the TV; doing so may cause the TV to tip over, resulting in
serious injuries or death. Follow all safety precautions provided on the
Wall Mount Kit Specifications (VESA)
included Safety Flyer. For added stability, install the anti-fall device for
safety purposes, as follows.
Wall mount kit is not supplied but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When
To avoid the TV from falling
attaching to other building materials, please contact your nearest dealer.
If installed on a ceiling or slanted wall, it may fall and result in severe
1. Put the screws into the clamps and firmly fasten them onto the wall.
personal injury.
Confirm that the screws have been firmly installed onto the wall.
You may need additional material such as an anchor depending
Standard dimensions for wall mount kits are shown in the table below.
on the type of wall.
When purchasing our wall mount kit, a detailed installation manual and all
Since the necessary clamps, screws, and string are not supplied,
parts necessary for assembly are provided.
please purchase these additionally.
Do not use screws that do not comply with the VESA standard screw
2. Remove the screws from the centre back of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
Do not use screws longer than the standard dimension, as they may cause
Screws may not be supplied with the product. In this case, please
damage to the inside of the TV set.
purchase the screws of the following specifications.
For wall mounts that do not comply with the VESA standard screw
specifications, the length of the screws may differ depending on their
3. Connect the clamps fixed onto the TV and the clamps fixed onto the
wall with a strong string and then tie the string tightly.
Do not fasten the screws too strongly, this may damage the product or cause
Install the TV near to the wall so that it does not fall backwards.
the product to fall, leading to personal injury. Samsung is not liable for these
It is safe to connect the string so that the clamps fixed on the wall
kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA
are equal to or lower than the clamps fixed on the TV.
or non-specified wall mount is used or the consumer fails to follow the product
Untie the string before moving the TV.
installation instructions.
4. Verify all connections are properly secured. Periodically check
Do not exceed 15 degrees tilt when mounting this TV.
connections for any sign of fatigue for failure. If you have any doubt
VESA Spec. (A * B)
Standard Screw
about the security of your connections, contact a professional
Anti-theft Kensington Lock
400 X 400
The Kensington Lock is not supplied by Samsung. It is a device used to
physically fix the system when using it in a public place. The appearance
Do not install your Wall Mount
and locking method may differ from the illustration depending on the
Kit while your TV is turned on. It
manufacturer. Refer to the manual provided with the Kensington Lock for
may result in personal injury due
additional information on proper use.
to electric shock.
Please find a "K" icon on the rear of the TV. The Kensington slot is
beside the "K" icon.
The position and colour may differ depending on the model.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped
end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
These are general instructions. For exact instructions, see the User
manual supplied with the locking device.
The locking device has to be purchased separately.
- 13 -
[PH4000-AR]BN68-05775A-01ENG.indb 2
■ Panel Lock: Lock or unlock all the keys on the panel.

❑ Other Features

■ Boot Logo: Display Samsung logo when the TV is turned on.
Menu Language
Change PIN
Set the menu language.
Change your password required to set up the TV.
Eco Solution
The PIN input screen appears before the setup screen.
Enter your 4-digit PIN. Change the PIN using the Change PIN
■ Energy Saving: This adjusts the brightness of the TV in order to
reduce power consumption.
DivX® Video On Demand
■ No Signal Power Off: To avoid unnecessary energy consumption, set
how long you want the TV to remain on if it's not receiving a signal.
Shows the registration code authorized for the TV. If you connect to
■ Auto Power Off: The TV will be automatically turned off when no user
the DivX web site and register with 10-digit registration code, you can
operation is received for 4 hours.
download the VOD activation file.
If the Auto Power Off option is set to Off, the TV will stay on even
Once you play it using Videos, the registration is completed.
if no operations are performed on the TV.
For more information on DivX® VOD, visit
Screen Burn Protection
Application Menu
To reduce the possibility of screen burn, this unit is equipped with Pixel
Shift screen burn prevention technology. Pixel Shift moves the picture
slightly on the screen. Auto Protection Time function setting allows you
❑ Using the Source List
to programme the time between movement of the picture in minutes.
Your TV also has the following additional screen burn protection
Source List
■ Pixel Shift: Using this function, you can set the TV to move pixels
When you press the
minutely on the PDP screen in a horizontal or vertical direction to
displayed at once.
minimize after images on the screen.
You can only choose external devices that are connected to the TV.
Available Pixel Shift Settings and Optimum Settings
In Source, connected inputs are highlighted.
For the detailed information, refer to "Changing the Input Source".
❑ Using the Media Play
Connecting a USB Device
Time (minute)
1~4 min
4 min
1. Turn on your TV.
The Pixel Shift value may differ depending on the monitor size
2. Connect a USB device containing photo, music and movie files to the
(inches) and mode.
USB port on the side of the TV.
This function is not available in the Screen Fit mode.
3. When USB is connected to the TV, popup window appears. You can
■ Auto Protection Time: If the screen displays a still image for a certain
select the Photos, Videos or Music directly.
period of time you define, the TV activates the screen saver to prevent
It might not work properly with unlicenced multimedia files.
the formation of burnt in ghost images on the screen.
■ Scrolling: This function removes after-images on the screen by
Need-to-Know List before using Media Play
illuminating all the pixels on the PDP according to a pattern. Use
MTP (Media Transfer Protocol) is not supported.
this function when there are after images or symbols on the screen,
Supported file systems are FAT and exFAT.
Certain types of USB Digital camera and audio devices may not be compatible
especially when you displayed a still image on the screen for a long
with this TV.
Media Play only supports sequential jpeg format.
The after-image removal function has to be executed for a long
Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a
time (approximately 1 hour) to effectively remove after-images on
Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb
the screen. If the after-image is not removed after you apply the
drives, Flash Card Readers (USB HUB are not supported). Devices should be
function, repeat the function again.
connected directly to the TV's USB port.
Press any key on the remote control to cancel this feature.
Before connecting your device to the TV, please back up your files to prevent
them from damage or loss of data. SAMSUNG is not responsible for any data
■ Side Grey: When you watch TV with the screen ratio set to 4:3, using
file damage or data loss.
the Side Grey function can prevent damage to the edges of the
The HDD (Hard Disk Drive) connected to USB is not supported.
screen by adjusting the white balance on the extreme left and right
Do not disconnect the USB device while it is loading.
The higher the resolution of the image, the longer it takes to display on the
The maximum supported JPEG resolution is 15360 x 8640 pixels.
■ Game Mode: When connecting to a game console such as
For unsupported or corrupted files, the "Not Supported File Format" message
is displayed.
PlayStation™ or Xbox™, you can enjoy a more realistic gaming
The scene search and thumbnail functions are not supported in the Videos.
experience by selecting game mode.
MP3 files with DRM that have been downloaded from a non-free site cannot
Precautions and limitations for game mode
be played. Digital Rights Management (DRM) is a technology that supports
To disconnect the game console and connect another external
the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the
device, set Game Mode to Off in the setup menu.
content providers, the prevention of the illegal copying of contents, as well as
If you display the TV menu in Game Mode, the screen shakes
managing billings and settlements.
PTP connection mode is fully available only with digital cameras. When
Game Mode is not available in TV mode.
connecting a smartphone or tablet to the TV using PTP mode, it may not be
After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
If Game Mode is On:
Picture Mode is set to Standard and Sound Mode is set to
- 10 -
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, visit "
com", then click on Support, or call Samsung customer service centre.
Solutions and Explanations
First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.
Picture Quality
(go to
- Support - Self Diagnosis - Picture Test)
If the test image is properly displayed, the poor picture may caused by the source or signal.
The TV image does not look as good as it did in
y If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver
the store.
SD (Standard definition) picture quality.
y Cable/Satellite subscribers: Try digital stations from the channel line up.
y Aerial connection: Try digital stations after performing Auto tuning.
y Adjust the Cable/Set top box video output resolution to 480p.
10 cm
y Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the
10 cm
The picture is distorted: macroblock error, small
y Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action
block, dots, pixelization
10 cm
y Low signal level or bad quality can cause picture distortion. This is not a TV issue.
y Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
Colour is wrong or missing.
y If you're using a component connection, make sure the component cables are connected to the correct jacks. Incorrect
or loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
y Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness)
y Adjust Energy Saving option in the TV menu. (go to
y Try resetting the picture to view the default picture settings. (go to
There is a dotted line on the edge of the screen.
y If the picture size is set to Screen Fit, change it to 16:9.
y Change cable/satellite box resolution.
The picture is black and white.
y If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the
When changing channels, the picture freezes or is
y If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box
distorted or delayed.
reboots. It may take up to 20 minutes.
y Set the output resolution of the cable box to 480p.
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
Sound Quality
(go to
- Support - Self Diagnosis - Sound Test)
If the audio is ok, the sound problem may be caused by the source or signal.
There is no sound or the sound is too low at
y Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.
maximum volume.
The picture is good but there is no sound.
y If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.
y If you are using an external device, check the device's audio output option (ex. you may need to change your cable box's
audio option to HDMI when you have a HDMI connected to your TV).
y Reboot the connected device by reconnecting the device's power cable.
The speakers are making an inappropriate noise.
y Check the cable connections. Make sure a video cable is not connected to an audio input.
y For aerial or cable connections, check the signal strength. Low signal level may cause sound distortion.
No Picture, No Video
The TV will not turn on.
y Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
y Make sure the wall outlet is working.
y Try pressing the
button on the TV to make sure the problem is not the remote. If the TV turns on, refer to "The
remote control does not work" below.
The TV turns off automatically.
y Ensure the Sleep Timer is set to Off in the Time menu.
y Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
y When watching TV from an aerial or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.
You can not play 3D videos in some of the BD
y Take out the disk from player and put it again, or restart the BD player.
There is no picture/video.
y Check cable connections (remove and reconnect all cables connected to the TV and external devices).
y Set your external device's (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.
For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV.
y Make sure your connected devices are powered on.
y Be sure to select the TV's correct source by pressing the
y Reboot the connected device by reconnecting the device's power cable.
- 14-
A USB device that requires high power (more than 500mA or 5V) may not be
If the TV has been no input during time set in Auto Protection Time, the screen
saver will run.
The power-saving mode of some external hard disk drives may be released
automatically when connected to the TV.
If a USB extension cable is used, the USB device may not be recognised or the
files on the device may not be read.
If a USB device connected to the TV is not recognised, the list of files on the
device is corrupted or a file in the list is not played, connect the USB device to
the PC, format the device and check the connection.
If a file deleted from the PC is still found when Media Play is run, use the "Empty
the Recycle Bin" function on the PC to permanently delete the file.
If the number of files and folders saved on a USB storage device is approximately
over 4000, the files and folders may not appear and some folders may not be
Disconnecting a USB Device
1. Press the
2. Select a desired USB device, and then press the
button. The
Tools menu appears.
3. Select Disconnect USB Device, and then wait until the selected USB
device is disconnected. You can remove a USB device from the TV.
To remove a USB device from the TV, we recommend use Disconnect
USB Device function.
Using the Media Play
button, Source screen will be
Enjoy photos, music and movie files saved on a USB Mass Storage Class
(MSC) device.
1. Press the
2. Press ◄/► button to select desired menu (Photos, Videos, Music),
then press the ENTERE button.
3. Press ◄/► button to select desired device, then press the ENTERE
button again.
4. Press the ▲/▼/◄/► button to select the desired file in the list, then
press the ENTERE button or ∂ (Play) button.
Playing the selected files
1. Press the ▲ button to select Options at the top of each main screen
and select Play Selected.
2. Select the desired files.
The check box appears to the left of the selected files.
Press ENTERE button again to deselect the file.
3. Press the ▲ button to select Play.
You can select or deselect all files pressing the Select All /
Deselect All.
Playing the Photos / Videos / Music
During playing a file, press the ▲/▼/◄/► button to select the desired
When the option menu is not displayed, press the
ENTERE button.
You can also use ∂/∑/∫/π/µ buttons on the remote control
during playback.
If you press the
button during playback, you can view the
playback information.
Playback menu
Previous / Next
Start Slide Show / Stop
Slide Show
Play / Pause
Previous / Next
Rewind / Fast forward
* When setting the Background Music to Mini Player in Photos, these
buttons appear.
Solutions and Explanations
Aerial (Air/Cable) Connection
The TV is not receiving all channels.
y Make sure the Aerial cable is connected securely.
y Please try Setup (Initial setup) to add available channels to the channel list. Go to
and wait for all available channels to be stored.
y Verify the Aerial is positioned correctly.
The picture is distorted: macro block error small
y Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and
block, dots, pixelization
action movies.
y A low signal can cause picture distortion. This is not a TV issue.
The picture will not display in full screen.
y HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
y Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
y Adjust the picture size options on your external device or TV to full screen.
Plasma TV is making humming noise.
y Plasma TVs typically make a soft humming sound. This is normal. It's caused by the electrical charges that are used to
create the images on the screen.
y If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower.
y You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also try
rerouting your connection cables.
y Improper installation of wall mount can create excessive noise.
Image Retention (Burn In) Issue.
y To minimize the possibility of screen burn, this unit is equipped with Pixel Shift screen burn reduction technology. Pixel
Shift lets you set the picture so it moves slightly up and down (Vertical Line) and side to side (Horizontal Dot). The
regular, slight movement of the picture reduces screen burn in.
- System - Eco Solution - Energy Saving)
- Picture - Reset Picture)
The remote control does not work.
y Replace the remote control batteries with the poles (+/–) in the right direction.
y Clean the sensor's transmission window on the remote.
y Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control doesn't turn
y Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
the TV on or off, or adjust the volume.
A "Mode Not Supported" message appears.
y Check the supported resolution of the TV, and adjust the external device's output resolution accordingly.
There is a plastic smell from the TV.
y This smell is normal and will dissipate over time.
TV is tilted to the right or left side.
y Remove the stand base from the TV and reassemble it.
There are difficulties assembling the stand base.
y Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, please use a magnetized
screw driver.
The Broadcasting menu is grey out (unavailable).
y The Broadcasting menu is only available when the TV source is selected.
Your settings are lost after 30 minutes or every
y If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. If you want to change the
time the TV is turned off.
settings from Store Demo mode to Home Use, press the
Support → Use Mode.
You have intermittent loss of audio or video.
y Check the cable connections and reconnect them.
y Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for
long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look closely at
y This is part of the product's design and is not a defect.
the edge of the frame of the TV.
The PIP menu is not available.
y PIP functionality is only available when you are using a HDMI or components source.
You turned the TV off 45 minutes ago, and it
y It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your
turned on again.
watching TV.
There are recurrent picture/sound issues.
y Check and change the signal/source.
A reaction may occur between the rubber cushion
y To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
pads on the base stand and the top finish of
some furniture.
The message "This file may not be playable
y This may appear because of high bit rate of content. Content generally will play but could experience some playability
properly." appears.
button on the remote control.
You can keep your TV as optimum condition upgrading the latest firmware on web site ( → Support) by USB.
Setting menu
Supported Video Formats
■ Photos
Video Codec
*.avi / *.mkv
DivX 3.11/4/5/6
Slideshow Settings
You can set the Speed and Effects during the
*.asf /
slide show.
*.mp4 /
You can zoom into images in full screen mode.
H.264 BP/
*.vro /
You can rotate images in full screen mode.
Motion JPEG
Background Music
You can set background music when watching
/ Mini Player
a slide show. / You can control simple playback
/ *.ts
Window Media
Video v9
*.tp / *.trp
*.mov / *.flv
Picture Mode / Sound Mode: You can adjust
the picture or sound setting.
*.vob / *.svi
Information: You can see detailed information
about the played file.
Other Restrictions
During the slide show, all files in the file list will be displayed in order.
Video content will not play, or not play correctly, if there is an error in the
When you press the ∂ (Play) button (or ▲ button → Options →
content or the container.
Slide Show) in the file list, slide show will be started immediately.
Sound or video may not work if the contents have a standard bit rate/frame
rate above the compatible Frame/sec listed in the table.
During the slide show, you can adjust the slide show speed using π
If the Index Table is in error, the Seek (Jump) function is not supported.
(REW) or µ (FF) button.
Some USB/digital camera devices may not be compatible with the player.
Supported Photo Formats
The menu can be displayed late if the video is over 10Mbps(bit rate).
File Extension
Video decoder
*.jpg / *.jpeg
15360 X 8640
y Supports up to H.264, Level 4.1 (FMO/
ASO/RS are not supported.)
4096 X 4096
y frame rate :
15360 X 8640
- Below 1280 x 720: 60 frame max
- Above 1280 x 720: 30 frame max
The MPO type file does not support Zoom, Rotate and Slide Show
y VC1 AP L4 is not supported.
Effect functions.
y GMC 2 or higher is not supported.
■ Videos
Supported Subtitle Formats
Search Titles: You can choose the other file
File extension
Search Time Bar: You can search the video
MPEG-4 timed text
using ◄ and ► button at one minute interval or
entering the number directly.
It may not be supported depending on the
input source.
Micro DVD
.sub or .txt
Repeat Mode
You can play movie files repeatedly.
SubStation Alpha
Picture Size
You can adjust the picture size to your
SubStation Alpha
Subtitle Settings: You can play the video with
subtitles. This function only works if the subtitles
■ Music
are the same file name as the video.
Picture Mode / Sound Mode: You can adjust
the picture or sound setting.
Audio Language: You can change the audio
language if the video has more than one
button or
Information: You can see detailed information
Sound Mode
about the played file.
Only displays the files with supported music file extension. Other file
If video time information is unknown, play time and progress bar are
extensions are not displayed, even if they are saved on the same
not displayed.
USB device.
In this mode, you can enjoy movie clips contained on a Game, but you
If the sound is abnormal when playing music files, adjust the
cannot play the Game itself.
Equaliser in the Sound menu. (An over-modulated music file may
cause a sound problem.)
Supported Music Formats
File Extension
MPEG1 Audio
*.m4a / *.mpa /
*.mid / *.midi
- 11 -
Storage and Maintenance
If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
- System - Setup (Initial setup)
DivX Certified® to play DivX® video up to HD 1080p,
including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that has
passed rigorous testing to verify that it plays DivX video. Visit for more
information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to for more information on how to complete your registration.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
button to select TV mode, and go to
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Model Name
Display Resolution
Screen Size
Dimensions (W x H x D)
With stand
Without Stand
With Stand
Design and specifications are subject to change without prior notice.
For information about the power required and more about power consumption, refer to the label attached to the product.
- 15 -
Media Play - Additional Functions
Videos/Music/Photos Play Option menus
Bit rate
rate (fps)
When playing a file, select the Options.
1920 x 1080
Copy the files to the other USB
for PDP 4100 series
Set the encoding language if the
text you want to view does not
640 x 480
appear correctly.
Device Format
Format the USB device.
for PDP 4100 series
1920 x 1080
DTS (Core)
Delete the files in the USB device.
for PDP 4100 series
Law, μ-Law)
❑ Using the Soccer Mode(Cricket Mode)
Soccer Mode(Cricket Mode)
(depending on the country)
This mode provides optimised condition for watching sports games.
When the Soccer Mode(Cricket Mode) is on, the picture and
sound modes are set to Stadium automatically.
Audio decoder
If you turn the TV off while watching Soccer Mode(Cricket Mode),
the Soccer Mode(Cricket Mode) will be disable.
y WMA 10 Pro supports up to 5.1
channel and M2 profile.
❑ Using the Screen&Sound Capture
y WMA lossless audio is not supported.
y Vorbis supports up to 2ch.
y DD+ supports up to 5.1 channel.
Screen&Sound Capture
This function provides capture screen or record an audio from the TV
screen being viewing. Additionally, you can save the capture image
and record audio on the USB device connected the TV. This function
provides the TV screen you watched capture image and record audio.
■ Screen&Sound Capture t: Turn the Screen&Sound Capture
function on or off.
SubStation Alpha
Text Format
■ Default Capture Device: You can set the default device for saving
Text Format
captured image files and recorded audio files.
SubStation Alpha
Text Format
This function is only available when the USB device is connected
MPEG-4 Timed
the TV.
Text Format
If the Screen&Sound Capture function is running, this function is
not available.
Support Menu
You can play music files repeatedly.
Self Diagnosis
You can play the music randomly.
You can adjust the sound setting.
■ Picture Test: Use to check for picture problems. If the problem
continues to occur, check the colour pattern.
■ Sound Test: Use the built-in melody sound to check for sound
■ Reset: Reset all settings to the factory defaults.
The PIN input screen appears before the setup screen.
Enter your 4-digit PIN. Change the PIN using the Change PIN
Software Update
The Software Update menu lets you upgrade your TV's software to the
Layer 3
latest version.
Current version: This is the software version already installed in the TV.
When software is upgraded, video and audio settings you have
Supports up to 2ch.
made will return to their default settings. We advise you to write
Supports up to 2ch.
down your settings so that you can easily reset them after the
WMA 10 Pro supports up to 5.1 channel
and M2 profile. (WMA lossless audio is not
■ Update now
By USB: Insert a USB drive containing the firmware upgrade file,
downloaded from "" into the TV.
type 0 and type 1
Please be careful not to disconnect the power or remove the USB
drive until upgrades are complete. The TV will be turned off and
on automatically after completing the firmware upgrade.
- 12 -
Clean the product with a soft cloth
Do not spray water directly onto the
dampened with in a small amount of
product. Any liquid that goes into the
water. Do not use a flammable liquid
product may cause a failure, fire, or electric
(e.g. benzene, thinners) or a cleaning
For DTS patents, see
Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS Premium Sound is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
For DTS patents, see
Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together
are registered trademarks and DTS Studio Sound is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Open Source License Notice
In the case of using open source software, Open Source Licenses are available on
the product menu. Open Source License Notice is written only English.
to 40
to 104 )
10% to 80%, non-condensing
to 45
to 113 )
5% to 95%, non-condensing
852 X 480
109 cm
10W X 2
100.74 X 61.62 X 5.57 cm
100.74 X 67.05 X 26.19 cm
13.6 kg
14.8 kg
- 16 -


Table of Contents

   Related Manuals for Samsung PA43H4000

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: