Download  Print this page

The "firmware-update" Tab - Siemens SIMATIC Ident Operating Manual

Hide thumbs


Operating the software
5.4 The tabs of the RF620R/RF630R readers

The "Firmware-Update" tab

With the "Firmware-Update" tab, you can update the firmware of the serial RF600 readers
(RF620R/RF630R). You will find more detailed information on the firmware in the section
"Service & Support (Page 79)" and on the Internet on the "Support homepage
Figure 5-15
To update the firmware, proceed as follows:
1. Copy the update file to your PC or programming device.
2. Select the update file.
3. Click the "Update" button to start the update.
Reaction: Following a successful update, the "Info" tab is opened automatically.
The "Firmware-Update" tab
You can enter the path of the update five in the input box or select the update file using
the "Browse..." button.
Reaction: The update is started and the update progress is shown.
Operating Manual, 09/2012, C79000-G8976-C292-01


   Also See for Siemens SIMATIC Ident

   Related Manuals for Siemens SIMATIC Ident

This manual also for:

Simatic rf-diag

Comments to this Manuals

Symbols: 0
Latest comments: