Download  Print this page


Operating the software
5.3 The tabs of the RF640R/RF670R readers

The "RSSI" tab

With the "RSSI" tab (Received Signal Strength Indikator) you can display the strength of the
received antenna signal and, if necessary, optimize the antenna alignment or transponder
position/distance. To allow optimum adaptation of the antenna, the RSSI values of the
transponders read by the reader are updated cyclically. The RSSI value indicates the signal
strength with which a transponder was recognized.
You will find further information on adapting the environmental conditions and the RSSI
value in "RF600 system manual
Figure 5-4
From the drop-down list, you can select the data source with which the recording will be
The "RSSI" tab
Operating Manual, 09/2012, C79000-G8976-C292-01


   Also See for Siemens SIMATIC Ident

   Related Manuals for Siemens SIMATIC Ident

   Related Content for Siemens SIMATIC Ident

This manual also for:

Simatic rf-diag

Comments to this Manuals

Symbols: 0
Latest comments: