Download  Print this page

Advertisement

Operating the software
5.3 The tabs of the RF640R/RF670R readers
Note
"First accessed Tag"
The first transponder to be processed is always displayed. If more than one transponder was
processed in the input box, the list of the EPC IDs of all processed transponders can be
seen in "Output". If there is only one tag that was processed in the input box, this is
displayed.
5.3.3

The "IO" tab

Using the "IO" tab (Inport/Outport), you can read out the inputs and outputs of the connected
readers. In this tab, you can also set specific outputs.
The inputs/outputs of the readers can only be read out synchronously. The reader can also
send IO events for changes at its inputs/outputs. IO events are, however, only sent by the
reader if the reader was suitably configured.
Figure 5-3
36
The "IO" tab
Operating Manual, 09/2012, C79000-G8976-C292-01
SIMATIC RF-DIAG

Advertisement

   Also See for Siemens SIMATIC Ident

   Related Manuals for Siemens SIMATIC Ident

   Related Content for Siemens SIMATIC Ident

This manual also for:

Simatic rf-diag

Comments to this Manuals

Symbols: 0
Latest comments: