1. Manuals
  2. Brands
  3. Tatu Marchesan Manuals
  4. Farm Equipment
  5. COP 15
  6. User manual

Tatu Marchesan COP 15 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
COP and COP SUPREMA planters are especially designed
to make the No-Till or Conventional planting of Corn, Soybean,
Bean, Rice, Peanut, Delinted Cotton, Sorghum, etc...
The permanent row units floating control guarantees the
accompaniment of the soil topography variations.
COP makes the precision planting with horizontal perforated
plates for several crops.
COP SUPREMA uses the vacuum seed metering, with
exclusive sealing system that assures larger useful life and a
continuous and uniform job.
The fertilizer distribution is done with auger type metering,
guaranteeing an uniform distribution in all the row units.
The calibration for different rates of fertilizer and seed is easily
obtained by the sprocket combination mechanism, without using
any tools.
The seed depth control is done through the oscillating rubber
wheels, that accompany the ground and favor the plants
emergence for equal.
This Manual contains the necessary information for the best
planter performance. The operator must read with attention the
whole manual before operating and be aware of the safety
recommendations.
To obtain any information, or in the eventuality of technical
problems, consult the dealer, as well as Marchesan's customer
service, that will guarantee the planters full operation.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the COP 15 and is the answer not in the manual?

Questions and answers

Related Manuals for Tatu Marchesan COP 15

Summary of Contents for Tatu Marchesan COP 15

  • Page 1 INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION COP and COP SUPREMA planters are especially designed to make the No-Till or Conventional planting of Corn, Soybean, Bean, Rice, Peanut, Delinted Cotton, Sorghum, etc... The permanent row units floating control guarantees the accompaniment of the soil topography variations. COP makes the precision planting with horizontal perforated plates for several crops.

  • Page 2: Table Of Contents

    INDEX INDEX INDEX INDEX INDEX TO THE OWNER ................................3 TO THE OPERATOR ..............................4 to 8 TECHNICAL SPECIFICATIONS ........................9 and 10 ASSEMBLY ................................ 11 and 12 Drawbar assembly ............................11 Row markers and row units assembly ......................12 SET-UP INSTRUCTIONS ............................

  • Page 3: To The Owner

    TO THE OWNER TO THE OWNER TO THE OWNER TO THE OWNER TO THE OWNER The acquisition of any TATU product assures to the original purchaser the following rights: - Warranty certificate; - Instructions manual and the - Technical assistance by the dealer on the equipment delivery. The owner has obligation to inspect the conditions of the product on delivery, as well as knowing the warranty terms.
  • Page 4 TO THE OPERA TO THE OPERA TO THE OPERA TO THE OPERA TO THE OPERA TOR Dear User ! Respect the Ecology. Do not throw the trash away. This gesture of goodwill helps to protect our Environment. Do not spill combustible oil, battery and filter residues in the soil.
  • Page 5 TO THE OPERA TO THE OPERA TO THE OPERA TOR TO THE OPERA TO THE OPERA Never your hands to check for Never attempt to hydraulic leaks. change Escaping hydraulic adjustments, clean oil under pressure or lubricate the can have sufficient implement when in force to penetrate movement.

  • Page 6: To The Operator

    TO THE OPERA TO THE OPERA TO THE OPERA TO THE OPERA TOR TO THE OPERA Safety Stickers The safety stickers are used to alert you to hazards in the most dangerous parts in the planter. Keep the stickers clean and replace them when it's necessary. C A U T I O N AT E N C I O N Read...
  • Page 7 TO THE OPERA TO THE OPERA TO THE OPERA TO THE OPERA TOR TO THE OPERA ADVERTENCIA WARNING CUIDADOS DURANTE EL TRABAJO Y EL PRECAUTIONS DURING WORKING AND TRANSPORTE: TRANSPORTATION: Las escaleras de acceso a la plataforma deben The ladders to the platform must be raised. estar levantadas.
  • Page 8 TO THE OPERA TO THE OPERA TOR TO THE OPERA TO THE OPERA TO THE OPERA - During the operation or transport do not allow riders on the tractor or implement. Serious personal injuries could result from falling in the path of the machine while in operation or transport.
  • Page 9 Hoppers Capacity Net Weight (kg) Tractor hp Required Models/ Row Spacings Working Fertilizer Seeds Double- Scarifier Width (mm) No. of Rows (mm) Liters (kg) Liters (kg) SUPREMA Disc Spindle 700, 750, 800, 850, 900 or 950 (200) 2,024 2,070 1,170 500, 550 or 600 2,900 (300)
  • Page 10 TECHNICAL SPECIFICA TECHNICAL SPECIFICA TIONS TECHNICAL SPECIFICA TIONS TIONS TIONS TECHNICAL SPECIFICA TECHNICAL SPECIFICA TIONS (Row Markers) (Chassi Outsides) COP SUPREMA Model 3,740 3,240 2,300 3,120 4,740 1,950 1,100 1,400 4,540 4,040 2,300 3,120 4,740 1,950 1,100 1,400 5,340 4,840 2,300 3,120 4,740...
  • Page 11 ASSEMBL ASSEMBL ASSEMBL Y Y Y Y Y ASSEMBL ASSEMBL The planters are delivered with some detached parts, just remaining the placement of those components according to orientations to proceed: Drawbar Assembling - Install the drawbar on the planter frame using the pins and locks (A). - Install the stabilizer (B) between the drawbar and the frame.

  • Page 12: Assembly

    ASSEMBL ASSEMBL ASSEMBL Y Y Y Y Y ASSEMBL ASSEMBL Row Markers Assembly Install the arms and disc markers. Note: - THE ROW MARKERS POSSESS SYNCHRONIZED MOVEMENTS WITH RAISING LOWERING PLANTER MOVEMENTS. - HAVE ESPECIAL ATTENTION TO THE PRESENCE OF PEOPLE OR ANIMALS IN THE ROW MARKERS ACTION AREA.

  • Page 13: Set-Up Instructions

    SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Preparing the Tractor If necessary, add counterweights to the tractor rear wheels. Hitching to the Tractor - Hitch the planter drawbar to the tractor with pin and lock. - If necessary use the planter stabilizer to raise or lower the hitch.

  • Page 14: Putting The Planter In Transport Position

    SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Putting the Planter in Transport Position Raise the planter totally and lift the stands up. Place the safety locks of the row markers. Place the safety locks into the hydraulic cylinders rod.
  • Page 15 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Spacing Between Rows COP models are delivered with minimum row spacing according to the requested number of rows, with flexibility for other row spacings; that is to say, for plantation of crops that need a larger distance between the rows.
  • Page 16 SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 7/7 - 400 mm row spacing. COP/COP SUPREMA 7/7 - 450 mm row spacing. COP/COP SUPREMA 7/6 - 500 mm row spacing. COP/COP SUPREMA 7/6 - 550 mm row spacing.
  • Page 17 SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 7/4 - 750 mm row spacing. COP/COP SUPREMA 7/4 - 800 mm row spacing. COP/COP SUPREMA 7/4 - 850 mm row spacing. COP/COP SUPREMA 7/4 - 900 mm row spacing.
  • Page 18 SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 9/9 - 400 mm row spacing. COP/COP SUPREMA 9/9 - 450 mm row spacing. COP/COP SUPREMA 9/7 - 500 mm row spacing. COP/COP SUPREMA 9/7 - 550 mm row spacing.
  • Page 19 SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 9/6 - 650 mm row spacing. COP/COP SUPREMA 9/6 - 700 mm row spacing. COP/COP SUPREMA 9/6 - 750 mm row spacing. COP/COP SUPREMA 9/5 - 750 mm row spacing.
  • Page 20 SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 11/11 - 400 mm row spacing. COP/COP SUPREMA 11/11 - 450 mm row spacing. COP/COP SUPREMA 11/10 - 500 mm row spacing. COP/COP SUPREMA 11/8 - 550 mm row spacing.
  • Page 21 SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 11/6 - 700 mm row spacing. COP/COP SUPREMA 11/6 - 750 mm row spacing. COP/COP SUPREMA 11/6 - 800 mm row spacing. COP/COP SUPREMA 11/6 - 850 mm row spacing.
  • Page 22 SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 13/13 - 400 mm row spacing. COP/COP SUPREMA 13/13 - 450 mm row spacing. COP/COP SUPREMA 13/10 - 550 mm row spacing. COP/COP SUPREMA 13/8 - 650 mm row spacing.
  • Page 23 SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 13/8 - 700 mm row spacing. COP/COP SUPREMA 13/8 - 750 mm row spacing. COP/COP SUPREMA 13/7 - 800 mm row spacing. COP/COP SUPREMA 13/7 - 850 mm row spacing.
  • Page 24 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 13/7 - 900 mm row spacing. COP/COP SUPREMA 13/6 - 900 mm row spacing. COP/COP SUPREMA 13/5 - 950 mm row spacing.
  • Page 25 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 15/15 - 400 mm row spacing. COP/COP SUPREMA 15/15 - 450 mm row spacing. COP/COP SUPREMA 15/12 - 500 mm row spacing. COP/COP SUPREMA 15/12 - 550 mm row spacing.
  • Page 26 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 15/10 - 650 mm row spacing. COP/COP SUPREMA 15/10 - 700 mm row spacing. COP/COP SUPREMA 15/8 - 750 mm row spacing. COP/COP SUPREMA 15/8 - 800 mm row spacing.
  • Page 27 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 15/8 - 850 mm row spacing. COP/COP SUPREMA 15/8 - 900 mm row spacing. COP/COP SUPREMA 15/7 - 950 mm row spacing.
  • Page 28 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 17/17 - 400 mm row spacing. COP/COP SUPREMA 17/17 - 450 mm row spacing. COP/COP SUPREMA 17/14 - 500 mm row spacing. COP/COP SUPREMA 17/14 - 550 mm row spacing.
  • Page 29 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 17/12 - 650 mm row spacing. COP/COP SUPREMA 17/10 - 700 mm row spacing. COP/COP SUPREMA 17/10 - 750 mm row spacing. COP/COP SUPREMA 17/7 - 950 mm row spacing.
  • Page 30 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 17/10 - 800 mm row spacing. COP/COP SUPREMA 17/9 - 850 mm row spacing. COP/COP SUPREMA 17/9 - 900 mm row spacing. COP/COP SUPREMA 17/8 - 850 mm row spacing.
  • Page 31 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 19/19 - 450 mm row spacing. COP/COP SUPREMA 19/16 - 500 mm row spacing. COP/COP SUPREMA 19/14 - 550 mm row spacing. COP/COP SUPREMA 19/15 - 550 mm row spacing.
  • Page 32 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 19/13 - 650 mm row spacing. COP/COP SUPREMA 19/12 - 700 mm row spacing. COP/COP SUPREMA 19/10 - 750 mm row spacing. COP/COP SUPREMA 19/10 - 780 mm row spacing.
  • Page 33 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Positioning the Row Units in the Chassis COP/COP SUPREMA 19/10 - 800 mm row spacing. COP/COP SUPREMA 19/10 - 850 mm row spacing. COP/COP SUPREMA 19/10 - 900 mm row spacing. COP/COP SUPREMA 19/9 - 890 mm row spacing.

  • Page 34: Procedures For Changing The Row Spacings

    -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Procedures for Changing the Row Spacings Make the row spacing change in a clean, plane and stable place. 1st) - Lower the parking stands. First, try to place them among the new row spacing that it will take place.
  • Page 35 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Procedures for Changing the Row Spacings 3rd) Loose the bolts (A) of the hexagonal bars and remove the cotter pins (B) 4th) Remove the hexagonal bars completely. 5th) Loose the nuts that hold the row units to displace them in the chassis.
  • Page 36 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Procedures for Changing the Row Spacings Important FASTEN ALL THE COMPONENTS PAYING SPECIAL ATTENTION TO THE FOLLOWING POINTS: - THE TIGHTENING OF THE NUTS THAT FASTEN THE SEED ROWS IN THE CHASSIS SHOULD BE MADE GRADUALLY, AVOIDING TO TIGHTEN EACH NUT TOTALLY AT ONCE.

  • Page 37: Planning Of The Plantation - Correct Stand

    -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Planning of the Plantation - Correct Stand Always consider that the plant population at the harvest time is smaller than the number of seeds indeed distributed in the planting operation due to factors as: germination, physical purity, vigor (Supplied in the packing of the seeds), besides insects and diseases that can happen during the plants lives.
  • Page 38 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS To obtain a population of 50,000 plants per hectare, at the harvest time, with seeds containing: Germination Index = 95% Physical purity = 90 and Slippage Index = 1.03 (3%) the following calculation should be made to know how many seeds should be distributed in a hectare.
  • Page 39 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Use of Powdered Graphite The powdered graphite should be mixed to the seeds to facilitate the distribution and to increase the mechanism distributor useful life. AMOUNT OF GRAPHITE PER KILOGRAM OF SEED Seeds with chemical treatment Kind of Seed-metering system: Round and...
  • Page 40 SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS - SPECIAL ATTENTION SHOULD BE ALSO GIVEN TO THE TOOTHED SEED KNOCKER, AS WELL AS THE GOOD OPERATION OF EVERY SEED METERING. SEE THE INSTRUCTIONS BELOW: THE KNOCKER WITH 5 TOOTH IS SUPPLIED IN THE PLANTER AND IT CAN BE USED IN ALL THE PLATES WITH ONE ROW OF SLOTED OR CIRCULAR CELLS, FOR EXAMPLE: CORN IN ROUND SHAPE, SOYBEAN, DELINTED COTTON, BEAN, ETC...
  • Page 41 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS Seed Distribution - Calibrating The amount of seed plate cells, the size of the cells, as well as the seed plate thickness vary according to the grain size and the desired plant population.
  • Page 42 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS SPROCKETS AMOUNT OF DRIVE DRIVEN SEEDS IN CORN - Standard Seed Plates SHAFT {A} SHAFT {B} 10 LINEAR METERS 22.3 Part # 0502020519 - Seed Plate 23.9 with 4.5 mm thickness and 28-...
  • Page 43 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS SPROCKETS AMOUNT OF DRIVE DRIVEN SEEDS PER SOYBEAN - Standard Seed SHAFT {A} SHAFT {B} 1 LINEAR METER Plates Part # 0502020565 - Seed Plate with 5.5 mm thickness and 90- cell Ø...
  • Page 44 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS SPROCKETS AMOUNT OF DRIVE DRIVEN SEEDS PER SOYBEAN - Optional Seed SHAFT {A} SHAFT {B} 1 LINEAR METER Plate Part # 0502020407 - Seed Plate with 5.5 mm thickness and 40- cell 9 x 14 mm.
  • Page 45 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS SPROCKETS AMOUNT OF DRIVE DRIVEN SEEDS PER SOYBEAN - Optional Seed SHAFT {A} SHAFT {B} 1 LINEAR METER Plate 13.5 14.5 16.7 Part # 0502020328 - Seed Plate...
  • Page 46 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS AMOUNT OF SPROCKETS SEEDS PER 1 LINEAR METER BEAN - Optional Seed Plate 2 SEEDS 1 SEED DRIVE DRIVEN SHAFT {A} SHAFT {B} PER CELL PER CELL...
  • Page 47 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS SPROCKETS AMOUNT OF DRIVE DRIVEN SEEDS PER SHAFT {A} SHAFT {B} 1 LINEAR METER BEAN and DELINTED COTTON Optional Seed Plate Part # 0502020419 - Seed Plate with 4.5 mm thickness and 40- cell 7 x 12 mm.
  • Page 48 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS SPROCKETS AMOUNT OF DRIVE DRIVEN SEEDS PER SORGHUM SHAFT {A} SHAFT {B} 1 LINEAR METER Optional Seed Plate Part # 0502020353 - Seed Plate with 5.5 mm thickness and 40- cell Ø...

  • Page 49: Fertilizer Distribution - Calibrating

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS Fertilizer Distribution - Calibrating The fertilizer distribution is done through the steel auger type dispensers, and the different rates are adjusted by the sprocket combinations of the Drive Shaft {C} (14-, 18- , 22-, 26-, 30-, 34- and 38-tooth) and Driven Shaft {D} (14-, 18-, 22-, 26-, 30-, 34- and 38- tooth).
  • Page 50 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ATTENTION - THE TABLE ("A") ON THE PAGE 51, INDICATES THE OBTAINED AMOUNT WITH THE AUGER OF 2" COIL PITCH (STANDARD). THIS AUGER TRANSPORTS APPROXIMATELY 35 GRAMS OF GRANULATED COMMERCIAL FERTILIZER PER TURN.
  • Page 51 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS...

  • Page 52: Practical Test Of Seed And Fertilizer Distribution

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS IMPORTANT The data of the previous Tables (Seed and Fertilizer) can vary due to several factors. We ask therefore to observe with attention the following procedures: Practical Test of Seed and Fertilizer Distribution The most indicated way to check both seed and fertilizer rates is in the own field where the plantation will take place.

  • Page 53: Auxiliary Calculation For Fertilizer Distribution

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS ATTENTION - THE WORK SPEED VARIATION AFFECTS THE UNIFORM SEED DISTRIBUTION. - WHEN THERE IS A CHANGE IN THE LOT OF SEEDS AS WELL AS IN THE FERTILIZER MANUFACTURER EVERTHING MUST BE CHECKED AGAIN.

  • Page 54: Oscillating Coulter Blades (No Till)

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS Oscillating Coulter Blades (No Till) The coulter blades possess movements of lateral oscillation to follow curves in the field. During the work do not change the travel direction suddenly.
  • Page 55 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS Scarifier Spindle: The scarifier spindle possess adjustments for the best acting in different soil conditions and straw type: - Gauge wheel for the scarifier working depth control, with adjustment through the mounting bolts.
  • Page 56 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS Opening the Seed Furrows The furrows for seeds are open through unaligned double-discs; that also possess flexible and adjustable scrapers in order to remove the soil accumulated in their internal parts.

  • Page 57: Adjusting The Press Wheels

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS Adjusting the Press Wheels The press wheels in "V" shape firm the soil around the seed and are able to work in several positions according to the soil type and conditions of the straw.

  • Page 58: Auxiliary Depth Control

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS Auxiliar Depth Control In light and disaggregated soils (Sandy) it can be necessary to use the stops of the cylinder rod, to aid in the depth control.
  • Page 59 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS Row Markers The use of the row markers is very important, because it is through them that a plantation will be gotten with uniform spacing. Later on, it will facilitate the cultivation and crop.
  • Page 60 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS ADJUSTMENTS AND OPERA TIONS TIONS WARNING BEFORE STARTING TO RAISE OR MOVE THE PLANTER CHECK FOR PEOPLE OR ANIMALS NEAR OR UNDER THE PLANTER, ESPECIALLY IN THE ROW MARKERS ACTION AREA. Marker Disc Angle marker discs...

  • Page 61: Operations - Important Points

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS OPERATIONS - Important Points - Tighten nuts and bolts after the first day of planting. Verify the conditions of the pins and cotter pins.

  • Page 62: Optional

    OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS Seed Plates Optionally MARCHESAN supplies perforated, slotted cell or blind seed plates, for several crops, according to list below: For CORN ..........24-Cell Ø 11 mm 4.5 mm - 0502020351 For CORN ..........24-Cell Ø 9.5 mm 4.5 mm - 0502020366 For SOYBEAN / BEANS ......

  • Page 63: Attachment For Two Planters

    OPTIONALS OPTIONALS OPTIONALS OPTIONALS OPTIONALS Attachment for Two Planters For planting extensive and flat ground areas, it is available the use of the Two- Unit Hitch to join two machines that are coupled in just a tractor. We pointed out that for this, the two machines should be of the same model; that is, two COP 7, two COP 9, two COP 11 or two COP 13, etc...

  • Page 64: Maintenance

    MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Lubrication In order to reduce the wearing caused by attrition among moving parts of the machine, it is necessary to make a correct lubrication, as indicated below. - Be sure about the lubricant quality, with relation to its efficiency and purity, avoiding the use of products contaminated by water, earth, etc...
  • Page 65 MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Lubricate every 10 hours of service...
  • Page 66 MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Lubricate every 50 hours of service...

  • Page 67: Maintenance Of The Fertilizer Metering

    MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Maintenance of the Fertilizer Metering For the correct fertilizer metering maintenance or to make any kind of repair in its internal part, do it in the following way: - Loose the cotterpins (A) of the sleeves liberating the square shaft. - Remove the bolts (B) that fasten the metering in the bottom of the fertilizer hopper.

  • Page 68: Cleaning Of The Seed Metering

    MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Cleaning the Seed Metering It is necessary to make a general cleaning in each seed metering daily. For this it is enough to remove the seed plate observe cutoff mechanism operation. By doing so, the best planting stand will be assured.

  • Page 69: How To Replace The Tires

    MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE How to Replace the Tires In case the planter tires (Carrying-wheels) need repairs, proceed as follows: - Raise the planter and install the stands (A) in the upper hole according the illustration. - Relieve the tires from the ground through the total action of the hydraulic cylinder.

  • Page 70: Planter Maintenance

    MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Planter Maintenance - Remove the fertilizer delivery hoses, and wash them immediately with water and neutral soap only. - Wash the whole machine with water only. - Wash the fertilizer augers with attention in order to remove any adherences. - Verify all the rotating parts of the planter for wearing occurrence.

  • Page 71: Cop Suprema

    COP SUPREMA COP SUPREMA COP SUPREMA COP SUPREMA COP SUPREMA V V V V V accuum Seed Metering accuum Seed Metering accuum Seed Metering accuum Seed Metering accuum Seed Metering...
  • Page 72 ASSEMBL ASSEMBL ASSEMBL Y Y Y Y Y ASSEMBL ASSEMBL Assembly of the Air Ducts - Remove the bolts (A) by loosening the butterfly nut with lock washers. - Assembly the adapter (B) by using the bolts (A). - Install the air ducts (C) by using the clamps (D). The air discharge duct must be disposed in the direction of the back of the machine.
  • Page 73 ASSEMBL ASSEMBL Y Y Y Y Y ASSEMBL ASSEMBL ASSEMBL Assembly of the Back Portion of the Row Units Install the back portion of the seed row units by using bolts (A), that are delivered in their mounting place.
  • Page 74 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS Turbine Driving With Homocinetic Drive Shaft. - In this case, it is recommended to use tractor with two-step clutch. - Verify the length of the drive shaft in the following way: - Separate the male bar from the female tube and couple it in the power take- off.
  • Page 75 -UP INSTRUCTIONS -UP INSTRUCTIONS SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS - Position the tractor in an angle alignment until the tire approaches the drawbar (approximately a 70 degree angle). With the drive shaft bars placed side by side verify the existence of a minimum free space of 4 centimeters according to the illustration below.
  • Page 76 SET -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS List of Standard Seed Plates Supplied with COP SUPREMA Planter For CORN ........32-Cell Ø 5 mm 0503011369 For SOYBEAN ........64-Cell Ø 4 mm 0503011370 Optional Seed Plates - COP SUPREMA Optionally, MARCHESAN supplies seed plates according to the list below: For CORN ........

  • Page 77: Seed Distribution - Calibrating

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS Seed Distribution - Calibrating Change the seed rate per linear meter through the sprocket combinations of the Drive Shaft {A} (17-, 21-, 25-, 34- and 38-tooth) and Driven Shaft {B} (14-, 17-, 22-, 28- and 30-tooth).
  • Page 78 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS COP SUPREMA Table for Distribution of CORN and SUNFLOWER Seeds Seed Plates with 32-Cell - 01 (one) seed per cell. Seed rates per 10 (Ten) linear meters according to the sprocket combinations.
  • Page 79 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS COP SUPREMA Table for Distribution of BEANS, SORGHUM and COTTON Seeds Seed Plates with 48-Cell - 01 (one) seed per cell. Seed rates per 1 (One) linear meter according to the sprocket combinations.
  • Page 80 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS COP SUPREMA Table for Distribution of SOYBEANS, SORGHUM and COTTON Seeds Seed Plates with 64-Cell - 01 (one) seed per cell. Seed rates per 1 (One) linear meter according to the sprocket combinations.

  • Page 81: Changing The Seed Plates

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS IMPORTANT: - SEED PLATES WITH CELLS OF LARGER DIAMETER SHOULD BE USED FOR LARGER SEEDS. - USE DRY SEEDS ONLY. - CONSTANT WORKING SPEED OF THE MACHINE: CORN / SUNFLOWER = 5 TO 6 KM/H;...

  • Page 82: Deflector Plate Adjustment

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS Deflector Plate Adjustment The metering possesses inside the deflector plate (A) adjustments to set the seed flow entrance in the metering. 1 - For Soybean or Small Seeds 2 - For Acid Delinted Cotton or Medium Seeds...

  • Page 83: Appropriate Suction

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS Appropriate Suction The appropriate suction is obtained after operating the planter for some meters, when the seeds are already housed in all the cells of the seed plates. The PTO drive shaft should operate in constant 540 rpm (Revolutions Per Minute).

  • Page 84: Adjusting The Selectors

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS Adjusting the Selectors So that the plate only transports one seed per cell, it is necessary to adjust the selectors in fact to avoid double-seeds. The superior selector (A), offers several adjustments in the scale, depending on the type and shape of the seeds.

  • Page 85: Troubleshooting Chart

    ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS Troubleshooting Chart PROBLEMS CAUSES POSSIBLE SOLUTIONS - Lower suction - Ideal PTO rotation speed. - Check the air hoses. - Improper selectors - Adjust the selectors properly.
  • Page 86 ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS TIONS TIONS TIONS ADJUSTMENTS AND OPERA ADJUSTMENTS AND OPERA TIONS Troubleshooting Chart PROBLEMS CAUSES POSSIBLE SOLUTIONS - Seed plate improper to the - Use seed plate cells diameter seed. suitable to the seeds. - Disadjusted selectors.

  • Page 87: Safety Stickers

    SAFETY STICKERS SAFETY STICKERS SAFETY STICKERS SAFETY STICKERS SAFETY STICKERS The safety stickers alert on the machine hazardous places that demand more attention. The stickers should be maintained in good conditions and replaced when necessary. WARNING ADVERTENCIA THE TURBINE EXPELS RESIDUES OR GASES OF USED W A R N I N G TOXICANT PRODUCTS IN THE SEEDS TREATMENT.

  • Page 88: Maintenance

    MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE Seed Metering Maintenance In the interval of each planting season, disassemble all the seed metering and verify the following steps: - Wearing of the seed selectors (A and B); - Wearing of the vacuum cutoff (C) that possess indicative saliences.
  • Page 89 IMPOR IMPOR IMPOR T T T T T ANT IMPOR IMPOR MARCHESAN S/A RESERVES THE RIGHT AT ANY TIME TO MAKE IMPROVEMENTS IN THE DESIGN, MATERIAL OR SPECIFICATIONS OF MACHINERY, EQUIPMENT OR PARTS WITHOUT THEREBY BECOMING LIABLE TO MAKE SIMILAR CHANGES IN MACHINERY, EQUIPMENT OR PARTS PREVIOUSLY SOLD.
  • Page 90 NOTES NOTES NOTES NOTES NOTES...

This manual is also suitable for:

Cop 11Cop 13Cop 19Cop 17Cop 9Cop 7 ... Show all

Table of Contents