Arrow Revolution Quick Start Manual page 2

Introduction
• User PIN codes can be 4 to 12 digits in length.
The Master PIN code is personalized by the user upon
•
installation. There is no factory default. The Master code
must be established before User codes can be set up.
-Enter Master code followed by the
users and program features.
-Enter Master code followed by the
• The key is used to enter or accept an entry, and
also to conclude a programming session.
• The key is used either to enter or to continue additional
steps in a programming sequence.
Establish the Master Code Before Programming
1. Touch the screen with the palm of your hand or fingers to activate
2. Press the key.
3. Enter personalized 6-digit Master PIN code followed by the
4. Press key to complete the process and conclude the programming session.
To Set Up User Codes
User Codes can only be programmed through Master Code.
1. Touch the screen with the palm of your hand or fingers to activate
2. Enter the 6 digit Master PIN code followed by the
Lock Response: "Menu mode, enter number, press the
3. Enter "2" followed by the key.
4. Enter "1" followed by the key.
5. Enter the User number to be registered (1-255) followed by the
6. Enter a 4-12 digit PIN code for the User number followed by the
Press to add more users.
7. Press the key to complete the process and conclude the programming session.
For Technical Assistance call Arrow:
1-800-221-6529.
P/N 80-9150-0074-010 Rev A
An ASSA ABLOY Group brand
key to manage
key to open door.
.
key.
.
key.
key to continue."
key.
key.
Quickstart Guide
Feature Programming
1. Touch the screen with the palm of your hand or fingers to activate
2. Enter the 6-digit Master PIN code followed by the
Lock Response: "Menu mode, enter number, press the
3. Enter digit corresponding to the function to be performed followed by the
Follow the verbal commands.
4. Press the key to complete the process and conclude the programming session.
1 2 3
M
Register Master Code
Register User Code
Passage Mode
Silent Mode
Language Setting Mode
All Code Lockout Mode
User Code Lockout Mode
Lock Setting Mode
EASY MODE PROGRAMMING INSTRUCTIONS
.
key.
key to continue."
key.
4
M
U
U
Register
1-255
U
Delete
1-255
Enable
Disable
Enable
Disable
English
Spanish
French
Enable
Disable
U
Enable
1-255
U
Disable
1-255
Re-lock Time
Wrong Code Entry Limit
Shut Down Time
Open Door With PIN Code
1. Touch the screen with
the palm of your hand or
fingers to activate.
2. Enter the Master or a
User PIN code.
3. Palm touch the screen or
press the key to
confirm the selection.
4. Turn lever to
open door.